Waters 715 Ultra WISP
- Mehr Informationen
- Status, Liefer- und Zahlungsbedingungen
- Technische Spezifikationen
- Weitere Produkte
Objektnummer | B00012846 |
---|---|
ID-Nummer | 012846 |
Objektbezeichnung | Waters 715 Ultra WISP |
Status | Archiv |
Status, Liefer- und Zahlungsbedingungen
Geräteüberprüfung
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Versandzeit
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Versandarten
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Lieferinformationen
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Die angegebenen Fracht- und Verpackungskosten beziehen sich auf den günstigsten Transportweg und sind vorbehaltlich unvorhergesehener Kostensteigerungen. Durch unvorhersehbare Ereignisse können sich die Frachtraten und die Lieferzeiten jederzeit ändern und müssten der aktuellen Situation angepasst werden. Incoterm-Kodierung gemäß Incoterms 2010: Bei Selbstabholung EXW, bei Sendungen per Schiff CFR, per Luftfracht CPT, übrige Sendungen DAP. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Zahlungsbedingungen
Wir akzeptieren keine Zahlung per Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land |
Mögliche Zahlungsarten |
Bemerkung |
DE, AT, CH |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
NL, BE, LU |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
Alle weiteren Länder |
Vorkasse, Kreditkarte |
|
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Statusdefinition
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status |
Zustand |
Bemerkung |
Sofort verfügbar |
gebraucht |
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden. |
Lagergerät |
gebraucht |
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel. |
Anbieter |
gebraucht |
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten. |
Neugerät |
neu |
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist. |
Labprocure |
gebraucht |
Verantwortlich für den Inhalt dieses Geräteangebotes ist die Labprocure GmbH als Geräteinserent. Labprocure übernimmt die Haftung für die hier inserierten Angebote und für die beinhalteten Fotos und Angebotstexte. Labprocure GmbH, Bruckstrasse 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
The Waters 715 Ultra WISPTM Sample Processor, referred to as the Ultra WISP, is a versatile, easy-to-use sample processor module that fully automates the injection process for high performance liquid chromatography (HPLC) instruinentation. The Ultra WISP may be programmed to inject up to 96 sample aliquots in either sequential or random fashion. Injection volumes are programmable from 0.1 to 2000 microliters (ul).
The Ultra WISP provides the following features:
Microprocessor-based all electric design
CRT with programming keypads
Patented dual port restrictor loop injector design
Sequential or random vial operating program
IEEE and RS-232 communications
Integrated needle wash system
Three syringe options
Two sample loop sizes
Two carousel sizes
In addition to programming a normal auto run, the Ultra WISP program enables you to:
Interrupt and then resume a normal run to perform a stat run
Run standards separately from the method table to simplify programming
Perform auto addition, co-injecting the contents of a common vial with the samples
Perform auto transfers to withdraw up to three reagents to transfer to samples
Program external event outputs
Suspend a run to reprogram sample parameters or to add sample vials to the carousel
Program the needle to withdraw sample from different levels in the vial
Purge the system and perform compression and bubble checks
The Ultra WISP is compatible with the Waters PowerLineTM family of HPLC systems and can also be programmed from a Waters 600E System Controller.
Maintenance of the Ultra WISP is simple due to the modular design of the flow path. The Ultra WISP is self-diagnosing, displaying system and error inessages when appropriate. For further diagnosis, you may also manually operate the individual assemblies.
General The Ultra WISP can routinely operate with system backpressure up to 4500 psi.
Any LC solvents compatible with current pump and column technology can be used with the Ultra WISP. Salts and buffers can reduce seal life, especially at system backpressures in excess of 3000 psi, and in absence of needlewash and regular maintenance and cleaning.
Physical Requirements Electrical Power - Nominal input voltage 100, 120, 220, 240 at 48-52, 58-62 Hz
Voltage may vary by +10% of nominal; a variation of - 10% longer than 13 milliseconds is considered a power loss.
Sample Capacity 48 Vial Carriage - 48 - 4 ml or optional 250-µl Low Volume Insert (LVI) screw cap vials per carriage; Teflon self- sealing or Teflon disc septa.
96 Vial Carriage - 96 - 1 ml snap-in push cap or optional 150-µl LVI vials per carriage.
Sample Volume 48 Vial Carriage - 2.0 ml maximum injectable volume (from 4 ml total); liinited volume inserts (LVI) allow minimum sample waste volume of 6 µl (maximum injectable volume - 244 µl).
96 Vial Carriage - 1 ml maximum injectable volume. Minimum sample required - 300 µl. Limited volume inserts (LVI) allow maximum injection volume of 120 µl.
Minimum Sample Volume 0.1 microliters
Functions Replicate injections as programmed from the controller
Output signals to reset gradient, start integrator, flow detector
Purge flow path with mobile phase
Discrete needlewash to prevent cross contamination
Programmable standard sequencing
Carry Over Less than 0.1% previous sample component concentration; except through sample interaction with 304 stainless steel parts.
Cross Contamination Dependent on selection of needlewash solvent and sample interaction with 304 stainless steel parts.
Injection Volume Delivery Mobile phase (degassed) tested at 100 psi, with Teflon disc vial septa, auxiliary sample loop out and preset operational parameters.
Mobile Phase Actual Volume (%)* at:
5µl 10µl 50µl
3% acetone in MeOH 95 98 99
Napthalene in CH2C12 75 85 95
3% acetone in H20 99 99 99
*Shown as a percent of programmed injection volume.
Theoretical results - actual is solvent dependent.
Reduced delivery will be observed for MeOH and CH 2 Cl 2 with higher solvent compressibility self-sealing septa and auxiliary sample loop.
Most accurate injection volume (all solvents): 50 µl.
Reproducibility Less than or equal to 1 % for 1 to 100 µl injections.
Linearity Coefficient of determination of greater than .99 for a range of 0-100µl.
Ultra WISP Part number 044500
Dimension Height: 17 inches (43.2 cm)
Length: 24 inches (61.0 cm)
Width: 15.25 inches (38.7 cm)
Weight 94 pounds (43 kg)
Desired Site conditions Humidity of 20 - 30%
Temperature of 16 to 27°C (60 - 80° F)
Dust level relatively low
Requires bench space of approximately 29 x 15.25 inches (74 x 39 cm).
Frequency The nominal frequencies of the Ultra WISP are 50 or 60 Hz; the operable frequency range is the same for both of these frequencies: 47 - 63 Hz.
Voltage Requirements Nominal Line Operable Voltage
Voltage Range
100 85-130
120 85-130
220 185-265
120 185-265
Fuse Requirements Nominal Line Fuse Fuse
Voltage Required Size
100 one 3-amp 0.25x1.25 inches (6x32mm)
120 one 3-amp 0.25x1.25 inches (6x32mm)
220 two 1.5-amp 5x20mm (0.20x0.78 inches)
240 two 1.5-amp 5x20mm (0.20x0.78 inches)
Communications Connectors IEEE-488: For connection to compatible Waters Data and Control Stations such as the 600E System Controller.
RS-232: For injection parameter transfer to a data module, such as the Waters 745.
Temperature Control: For future use with temperature control components.
Input Terminals The specifications for the Hold terminals are as follows:
TTL or switch closure compatible
Low trigger of 1.8 volts
High trigger of 3.0 volts
Protected to ± 30 volts
Minimum of 30 millisecond pulse
Maximum of 5 milliamps current
Output Terminals The specifications for the Inject Start, Run Stop, and Out terminals are as follows:
Contact closure compatible
Maximum 10 watts with the following restrictions: maximum of 0.5 amps current (to 20 V), maximum 130 VAC (to 0.07 amps)