Dionex DX-500
- Mehr Informationen
- Status, Liefer- und Zahlungsbedingungen
- Technische Spezifikationen
- Weitere Produkte
Objektnummer | B00019029 |
---|---|
ID-Nummer | 019029 |
Objektbezeichnung | Dionex DX-500 |
Status | Archiv |
Status, Liefer- und Zahlungsbedingungen
Geräteüberprüfung
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Versandzeit
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Versandarten
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Lieferinformationen
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Zahlungsbedingungen
Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land |
Mögliche Zahlungsarten |
Bemerkung |
DE, AT, CH |
Rechnung, Vorkasse |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
NL, BE, LU |
Rechnung, Vorkasse |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
Alle weiteren Länder |
Vorkasse |
|
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Statusdefinition
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status |
Zustand |
Bemerkung |
Sofort verfügbar |
gebraucht |
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden. |
Lagergerät |
gebraucht |
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel. |
Anbieter |
gebraucht |
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten. |
Neugerät |
neu |
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist. |
Firma: Dionex
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Specifications
Signals
Up to nine, each defined by a sample wavelength and bandwidth.
Noise
< ±25 }SAU, 250 nm 4-nm bandwidth
Drift
< 1 mAU/hr, 250 nm, empty cell
Wavelength Range 195 Â 600 nm
Wavelength Accuracy ± 1 nm
Resolution
1 nm Digital
Spectral Acquisition
Selectable, 240, 320, 640, 1280, 2000 ms
Light Source
Deuterium; 1000 hrs
Flow Cells
Stainless Steel: 8-µL volume, 10-mm path, 5 MPa (750 psi) max
Titanium (optional): 8-µL volume, 10-mm path, 5 MPa (750 psi) max
Prep (optional): variable volume and path, 2 MPa (300 psi) max: 0.8-µL volume, 0.1-mm path 1.6-µL volume, 0.2-mm path 4.0-µL volume, 0.5-mm path
High pressure (optional): 3-µL volume, 6-mm path, 40 MPa (6000 psi)
Diode Array Thermostat
3-stage temperature control:
Off, Low (37 °C), High (47 °C) Important for dark-current control
Operating Temperature Range
10Â35°C
Dimensions (h x w x d)
20 cm (7.9 in.) x 26 cm (10.2 in.) x 52 cm (20.5 in.)
Weight
18 kg (401b)
Power Requirements
120 V ac, 2 A, 60 Hz;
or 220 V ac, 1 A, 50 Hz;
or 240 V ac, 1A, 50 Hz
Autosampler AS 40
Specifications
Sample Delivery Method:
Displacement
Capacity:
11 cassettes of either six 5-mL or eight 0.5-mL PolyVials
Vial Size:
Nominal volume of 0.5 or 5 mL
Filter Pore Size:
20 µm
Minimum Volume Delivered:
0.17 mL from 0.5-mL vials; 1.7 mL from 5-mL vials
External Control:
Relay closure
Injections Per Vial:
1, 2 or 3 samples may be delivered from each vial
Type of Loading:
Loop: Delivers sample rapidly to sample loop
Concentrator: Delivers sample against back pressure of up to 100 psi (690 kPa) at approximately 0.4 mL/min (0.5-mL vials) or 1 mL/min (5-mL vials)
Mode of Sampling:
Proportional: delivers volume inversely proportional to number of injections per vial
Constant: Delivers fixed volume independent of the the number of injections per vial
Bleed:
On: Displaces excess sample and
any trapped air through bypass valve before sampling
Off: Delivers sample and any trapped air directly to injection valve
Dimension, (H x W x D):
11.3 x 14.3 x 17.5 in.
(28.7 x 36.3 x 44.5 cm)
Detector ED 40
The versatile Dionex ED40 Electrochemical Detector provides the three major forms of electrochemical detection: Conductivity, and DC and integrated amperometry. An additional mode is voltammetry, which can be used to determine the potentials used for amperometry operation. The ED40 can also be used to monitor pH during amperometric operation; and temperature during conductivity operation.
Features
The ED40 includes all of the features of the CD20 conductivity detector, plus:
 An advanced electrochemical cell design that incorporates a 1-mm diameter working electrode for a high signal-tonoise ratio.
 Four working electrode options: gold, platinum, silver, and glassy carbon.
 Low volume cell for low dispersion.
 Corrosion resistant titanium flow path and counter electrode.
 Combination pH-Ag/AgC1 reference electrode that minimizes baseline shift with pH gradients.
 Easy remote mounting of amperometry cell.
Conductivity Electronics & Flow Cell
Same as CD20 Conductivity Detector.
Amperometry Electronics
Noise: 1 pA (DC amperometry); 20 pC (integrated amperometry)
Potential Ranges: ±2.00 V in 0.01-V increments.
Control Modes: Local or remote via relay closures, TTL, or by PeakNet Software via DX LAN.
Amperometry Flow Cell
Electrodes:
Interchangeable working electrodegold, platinum, silver, or glassy carbon. Counter electrodeÂtitanium.
Reference electrodeÂpH-Ag/AgCI combination.
Wetted Materials: PEEK, Titanium, Kel-F, polyetherimide, EPR, glass, high density polyethylene (HDPE), and working electrode material (gold, platinum, silver, and glassy carbon).
Cell Volume at Working Electrode:
Maximum Operating Pressure: 0.7 MPa (100 psi).
Output Control
Filter: 0 to 10 s response time.
Full-Scale Analog Output Ranges: Conductivity-0.01 gS to 3000 gS Integrated amperometryÂ50 pC to 200 gC. DC amperometryÂ50 pA to 300 p.A.
Offset: To full-scale for each range.
Analog Signal Output Voltage: 0.01, 0.1, or 1 V.
Gradient Pump GP 40
The Dionex GP40 Gradient Pump is a dual processor-controlled gradient solvent delivery system designed to blend and pump mixtures of up to four mobile phase components at precisely controlled flow rates. The selected mobile phase composition may be delivered either isocratically or as a linear or exponential gradient.
The GP40 is configured as either a standard bore or a microbore pump.
Features
- Dual processors (a microprocessor for module common functions and a Digital Signal Processor (DSP) dedicated to fulltime pump control) provide superior flow control, stability, and accuracy for low noise.
- Computer-aided design of flow path provides extremely small void volumes for accurate, sharp gradients with minimal delays.
- DSP firmware provides compressability compensation for accurate flow rates and eluent proportioning regardless of pressure level and viscosity.
- Dual pump heads reduce pulsation, allowing high sensitivity detection with pulse sensitive detectors.
- Built-in vacuum degas Option provides sealed pressurized in-line degassing for best reproducibility, lowest backgrounds, and protection of delicate solvents from contamination and breakdown.
- Isocratic proportioning or binary, ternary, or quaternary gradients can be programmed. In addition to a linear gradient, four concave and four convex gradients can be chosen.
- User-selectable pressure mode or flow mode (no pressure feedback).
- User-selectable high and low pressure limits automatically stop the pump in the event of leaks, flow restrictions, flow blockages, or an empty eluent reservoir.
- Integral piston rinsing prolongs seal lifetime by preventing salt crystallization on the piston.
GP40 Pump Hydraulics
Construction: Chemically inert, metal-free PEEK flowpaths are compatible with all aqueous eluents of pH 0Â14 and reversed phase solvents.
Type: Dual reciprocating pistons, microprocessor-controlled constant stroke, variable speed.
Control Modes: Local or remote via relay closures, TTL, or by PeakNet Software via DX LAN.
Flow Rate Setting Resolution: 10 µL/min
Maximum Pressure: 35 MPa (5000 psi) for both microbore and standard pump heads.
Pressure Alarm Limits: Upper limit 0Â35 MPa or 0Â5000 psi in 1 unit (MPa or psi) increments; lower limit settable to up to one unit lower than high limit setting.
Flow Accuracy: ±0.5% of setting.
Flow Precision: Better than 0.2% for microbore pump; better than 0.1% for standard pump.
Eluent Selection: Four different mobile phase components; each can be proportioned from 0 to 100%.
Proportioning Accuracy: ±1% for standard pump; ±2% for microbore pump.
Pressure Pulsation: 0.2% of system pressure (in pressure mode).
Physical Specifications
Power Requirements: 90 - 265 V ac, 47 - 63 Hz (power supply is auto-sensing no voltage adjustment required).
Operating Temperature Range: 4 to 40°C (40 to 104°F); cold room (4°C) compatible as long as system power remains on.
Operating Humidity Range: 5 - 95% relative, noncondensing.
Dimensions: 33.5 cm h x 22.5 cm w x 42 cm d (13.1 in. x 8.8 in. x 16.4 in.)
Weight: 16.1 kg (35.3 lb); 19.5 kg (43 lb) with degas option.