Archiv

Zymark Turbo VAP 96

ID-Nummer: 019653
Status: Archiviertes Produkt?The unit is no longer available.
Versand:
Beschreibung:
Zymark Konzentrator/Concentration Workstation Turbo VAP 96. 220/240 V. 50 Hz. 2,6 A. 620 W. Timer 1-99 min. 2 Heizblöcke, max. 80°C. Stickstoff notwendig. Mit Adaptern zur Aufnahme von Mikrotiterplatten. Mit Abluftschlauch. CE-Zeichen. Baujahr 2003.
siehe Storeview
Mehr Informationen
Objektnummer B00019653
ID-Nummer 019653
Objektbezeichnung Zymark Turbo VAP 96
Status Archiv

Status, Liefer- und Zahlungsbedingungen

Geräteüberprüfung

Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.

 

Versandzeit

Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.

Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.

 

Versandarten

Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark

 

Lieferinformationen

Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.

Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.

 

Zahlungsbedingungen

Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.

Land

Mögliche Zahlungsarten

Bemerkung

DE, AT, CH

Rechnung, Vorkasse

Eine Zahlung per Rechnung ist nur für Firmenkunden möglich.

NL, BE, LU

Rechnung, Vorkasse

Eine Zahlung per Rechnung ist nur für  Firmenkunden möglich.

Alle weiteren Länder

Vorkasse

 

 

Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.

 

Statusdefinition

Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.

Status

Zustand

Bemerkung

Sofort verfügbar

gebraucht

Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden.

Lagergerät

gebraucht

Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel.

Anbieter

gebraucht

Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten.

Neugerät

neu

Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist.

Firma:              Zymark

Modell:            Turbo VAP

Kommentar:   Dokumente engl.

The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.

Introduction

The Zymark TurboVap LV Evaporator is a microprocessor-controlled evaporator that provides simultaneous, automated concentration of multiple samples, unattended operation, convenience, and speed.

Automated

Microprocessor-control provides monitoring of the timed operation and water bath temperature. It also provides automatic gas shutoff and operational diagnostics.

Convenience

The operator is able to start a run of samples and leave it unattended. When the preset time has expired, the gas shuts Off automatically and the evaporator sounds a buzzer. The buzzer continues to beep every 30 seconds until operation is stopped.

Patented Technology

The patented "gas vortex shearing action" speeds evaporation.

Multiple Sample Processing

The evaporator uses one to five manifold rows. Each manifold has ten nozzles that extend into the tubes to supply the gas for evaporation. This allows up to 50 samples to be processed simultaneously. If you have less than 50 samples, you activate only those rows where samples are located.

Flexible

Evaporation may be paused, then stopped or resumed at any time. Time and temperature settings, and the selection of a row of tubes may be changed at any time.

Requires No Hood

The hinged cover and exhaust System save valuable hood space and permit benchtop use.

Complete With Accessories

Most of the hardware needed for installing and using the evaporator is provided. Racks and tubes are ordered separately. There are several rack sizes from which to choose. These include two types of 16 mm x 100 mm racks, two types of micro-centrifuge tube racks, two types of 15 mL conical bottom centrifuge tube racks, and racks for l0mm x 75 mm, 12 mm x 75 mm, 13 mm x 100 mm, 16 mm x 125 mm, 20 mm x 150 mm, and 10 mL conical bottom centrifuge tubes.

Specifications

Capacity:         fifty tubes

Containers and Working Volumes: (using different racks)

Containers:                                       Working Volumes

10 x 75 mm tubes                               up to 4 mL

12 x 75 mm tubes                               up to 4 mL

13 x 100 mm tubes                             up to 7 mL

16 x 100 mm tubes                             up to 12 mL

16 x 125 mm tubes                             up to 16 mL

20 x 150 mm tubes                             up to 30 mL

10 mL conical bottom tubes               up to 10 mL

15 mL conical bottom tubes               up to 15 mL
15 mL volumetric

conical bottom tubes,                         up to 15 mL
(compatible with the AutoTrace SPE Workstation)

1.5 - 2.0 mL micro-centrifuge tubes

(screw cap type)                                 1.5 to 2 mL
1.5 - 2.0 mL micro-centrifuge tubes

(flip cap type)                                      1.5 to 2 mL

NOTE: Full sample tubes must be evaporated with care to prevent splashing.

Typical Evaporation:

Rates:             Solvent                       Time (min.)

Ethyl Acetate               17.5

Hexane                        9

Methanol                      25.5

Methylene Chloride      17

* Conditions:

10 mL of solvent evaporated to dryness at 52 °C. Methylene chloride bath temperature at 38°C.

Gas Consumption:

1 cfm per row of nozzles at 15 psi (from a source capable of supplying 60 to 100 psi.)

Water Bath Temperature Range:

ambient to 90°C

Gas Regulator and Gauge Range:

0 to 30 psi (206.9 KPa)

Dimensions:

Height: 11.9" (30.2 cm)

Width: 21.2" (53.8 cm)

Depth: 11.9" (30.2 cm)

Weight :

40.5 lbs. (18.47 Kg.) — empty water bath

Time Range:

1 to 99 min. or 0.1 to 9.9 hrs. — can also be set to 00 for infinite time

*** NOT for in vitro testing ***

Theory of Operation - Helical Gas Flow

The evaporator takes advantage of a patented gas vortex shearing action that maintains high evaporation rates regardless of sample height in the tubes. The helical flow sets up a vortexing action that provides for sample homogeneity and continuous rinsing of the tube wall. The vapor-laden gas exits via an unobstructed path up the center portion of the tubes and is removed by an exhaust fan to the exhaust port in the back of the unit. From the exhaust port, the exhaust duct is routed by you to a suitable, outside-vent location.

Main Features

Cover

Operation automatically begins or resumes when the cover is closed. The evaporation pauses when the water bath cover is open. After an evaporation, open the cover to prevent condensation within the unit.

Control Panel

The control panel allows you to control evaporation in one to five rows of 10 tube positions. (Samples are not required in each position.) The microprocessor constantly monitors the control panel allowing you to make changes to the panel settings at any time during the evaporation process. Yellow lights indicate the row(s) of tubes selected. The green light to the right of the START/PAUSE button is on when an evaporation is in progress and blinks when the evaporation has been paused. A STOP button on the control panel allows for termination of the evaporation process. The control panel also has two displays: one indicates time remaining; the other indicates the actual water bath temperature. These displays also provide diagnostic codes when an error is detected.



Automatic Control

The Operator sets the desired evaporation parameters for each run. After pressing the START button and closing the lid, the evaporator automatically monitors the programmed process. A buzzer sounds when the evaporation is completed.

Water Bath

Sample tubes are placed in a rack that sits in a temperature-controlled water bath. The water bath operates over a temperature range of ambient to 900C.

The TurboVap LV evaporator is not designed to cool but the water bath temperature can be brought down as much as 15C0 by using the evaporation as a cooling source. Cooling ability varies with the evaporation rate.

Use the numeric pushwheel to select the desired temperature setting.

Gas Supply

The evaporator has a gas supply input on the back of the unit. The fitting provided has an internal shutoff which allows you to disconnect the evaporator from the supply without shutting off the gas supply itself.

There is a gas regulator knob on the side of the unit and a gauge on the front panel. Use the gas regulator knob to reduce the external gas supply pressure (60 psi to 100 psi) to the 0 to 30 psi desired helical gas flow directed at each of the sample tubes.

The gas supply is routed through a stainless steel manifold to each sample tube.

Exhaust Port

Solvent vapors are removed by an exhaust fan and routed to the exhaust port on the back of the unit. You must route the venting hose from the exhaust port to a proper ventilation System venting to the outside. The TurboVap LV" s design assures that vapors are contained for you to remove from the laboratory environment.

Once the TurboVap LV is properly installed and properly vented, vapors remain contained and they are removed automatically when the system is operating properly.

Buzzer Volume Control

There is a buzzer with an adjustable volume control in the back of the unit.

Turn the knob in either direction until the desired volume is achieved.

A repeating beep indicates a completed run.

A long beep indicates interrupted operation.

A short beep indicates a recognized key input.

Produktgruppe: Rotationsverdamper / Destillen

Wir können keine Produkte entsprechend dieser Auswahl finden
Back to Top
part-of-labexchange-group
Suchmaschine unterstützt von ElasticSuite
Smart Deals Smart Deals
Labprocure