JavaScript scheint in Ihrem Browser deaktiviert zu sein. Um unsere Website in bester Weise zu erfahren, aktivieren Sie Javascript in Ihrem Browser.
24 Monate Gewährleistung
60 Tage Labexchange Vollgarantie
Funktions-Zertifikat
Rückgaberecht
Optionale Garantieverlängerung bis auf ein Jahr
Optionale Geräteinstallation für sofortige und sichere Gerätenutzung
Attraktive Miet- und Leasingangebote schonen Ihr Budget
Fragen zu diesem Gerät
Der Gewährleistungszeitraum für unsere Geräte beträgt 24 Monate ab Anlieferungsdatum.
Alle Gebrauchtgeräte von Labexchange werden vor der Auslieferung einer technischen Überprüfung unterzogen und werden nur ausgeliefert, wenn sie einwandfrei funktionieren. Die Überprüfung und Funktionsfähigkeit wird durch einen Servicebericht unabhängiger Servicefirmen dokumentiert. Die Labexchange Vollgarantie beträgt 60 Tage ab Anlieferungsdatum. Auftretende Fehlfunktionen werden innerhalb der Garantiezeit kostenlos durch uns behoben. (Gültig für Länder innerhalb der EU und CH)
Die Überprüfung und die Funktionsfähigkeit unserer Geräte werden zusätzlich zum Servicebericht mit einem Funktions-Zertifikat dokumentiert.
Mit unseren gebrauchten Laborgeräten und Analysesystemen sind Sie auf der sicheren Seite!
Für noch mehr Sicherheit beim Kauf räumen wir Ihnen das Labexchange Rückgaberecht ein. Geben Sie Ihr Laborgerät oder Analysesystem ohne Angabe von Gründen einfach zurück.
Es gelten unsere spezifischen Geschäftsbedingungen:Labexchange Rückgaberecht(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/Rueckgaberecht_08_18_D.pdf)
Auf Wunsch prüfen wir die Möglichkeit einer Garantieverlängerung für Ihr Gerät. Falls möglich, beträgt die Garantiedauer 6 Monate bei einem Aufpreis von 10% auf den Listenpreis und 1 Jahr bei einem Aufpreis von 20%. (Gültig für DE, AT, CH, FR, NL, BE, LU, GB und IR)
Gehen Sie auf Nummer sicher! Unsere qualifizierten Techniker installieren das Gerät zu Ihrem Wunschtermin im Labor, damit Sie schnell und sicher mit ihrem neuen Laborgerät arbeiten können.
Die Geräteinstallation durch Labexchange bringt Ihnen weitere Vorteile. Sie erhalten hierdurch eine Garantieverlängerung auf 3 Monate und haben zudem ein Anrecht auf die Labexchange Rückkaufgarantie.
Sensible Laborgeräte und Analysesysteme sowie ein Großteil der verfügbaren Laborabzüge erhalten Sie bereits inklusive Installation. Wir bieten Ihnen gerne die Installation Ihres Laborgerätes an.
* Pflichtfelder
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land
Mögliche Zahlungsarten
Bemerkung
DE, AT, CH
Rechnung, Vorkasse
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich.
NL, BE, LU
Alle weiteren Länder
Vorkasse
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status
Zustand
Sofort verfügbar
gebraucht
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden.
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel.
Anbieter
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten.
Neugerät
neu
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist.
Firma: Spectra Physics
Modell: HPLC
Kommentar: Dokumente engl. (nur für IDNR 10588)
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
The SP8800 Series Pumps have been designed for ease of use and unsurpassed performance. They can be used as standalone pumps or as modules in a totally automated LC system. The SP8800 offers low pressure ternary mixing that provides accurate proportioning of binary or ternary mobile phase compositions in either the gradient or isocratic mode. The Isocratic SP8810 Pump offers all of the features and performance of the SP8800, except that the ternary proportioning valve, associated electronic circuitry and software are not included.
These pumps permit as many as 40 lines of programming in each of 10 method files, which are sufficient for even the most complex of gradient profiles.
Pump Design Dual piston, pulseless design with 12,800 control steps per cam revolution.
Floating Piston Design Long seal life.
LCD Display 2 lines, 48 characters.
"Bayonet-Mounted" Easy maintenance and parts replacement
Liquid Ends
Flow Range 0.01 to 10 mL/min standard. Up to 30 mL/min using prep option. Setable in 0.01 mL/min increments.
Flow Precision 0.2 % RSD a
Maximum Pressue 6000 psi for standard head;
2500 psi for prep option.
Compressibility Compensation Automatic
Method Files Ten method files of 40 steps each.
Startup File User defined file that is stored in non-volatile memory.
Cleanup File User programmed file initiated automatically at end of sample run to clean out pump and column.
Flow Stability Test Pump flow diagnostic to verify proper pump performance.
Diagnostics Diagnostic tests to verify proper electrical and mechanical operation.
Help Screens Over 430 lines of Help text provides specific information for all pump operations.
Communications Contact closures and LABNET standard. RS-232-C optional.
Battery Backup 100-hr backup of RAM memory.
Battery Backup Height- 7 1/4 inches
Dimensions Width- 15 3/4 inches
Depth- 20 inches
Weight 33 pounds
Power Consumption 200 VA
Pump Design Micro-stepped pump with low pressure ternary mixing capability. A helium degas manifold is standard.
Internal Volume 800 microliters.
Composition Range 0 to 100% in 0.1% increments.
Composition Repeatability 0.2 % RSD b
Gradient Linearity 0.5 % maximum deviation from linearity. c
Gradient Delay Dead volume compensation setable in 0.01 mL increments.
Minimum Flow for Gradient 0.05 mL/min.
High Internal Mixing No mixer required for most applications.
a Typical RSD obtained on chromatographic retention times.
b Typical RSD obtained on chromatographic retention times using solvent proportioning.
c Typical deviation from the best fit linear line from 15% to 85% gradient composition without a mixer.
The Autosampler is a microprocessor-controlled modular automatic liquid sampling unit designed for use in liquid chromatography. It is designed to be part of a total System which includes a pump, a detector, and an integrator.
The Autosampler accommodates up to 81 samples, and up to 10 injections per sample in a completely automated operation. Interaction between the Autosampler and other Spectra-Physics instruments is available through the LABNETOO communications network.
The Autosampler consists of a single microprocessor-controlled module, containing Keyboard and Display, the Injector Valve, Helium Degas control for flush solvent, diagnostics, and all required mechanical and electrical assemblies. Also included are a detachable flush reservoir, four sample trays, necessary tools, tubing and fittings for installation, and Operators Manual.
Capabilities include:
o 80 sample vials in four removable trays.
o Vials are identified by the quadrant and the position in the tray.
o Trays can be numbered 1 - 20 and automatically read.
o A priority sample, position 5.01, can be run without disrupting the automatic sequence.
o The Same vials can be used repetitively for calibration and recalibration sequencing.
o Full loop and variable volume injection (SP8880 only) modes.
o Samples are withdrawn by a digital stepmotor-driven syringe through the concentric sampling needle which permits vial pressurization with a gas in full loop mode.
o Automatic flush sequence after every injection.
o Variable sample draw and injection dwell rates for the analysis of viscous samples.
o Sample size, number of injections, run time and analysis file can be varied with each vial.
o Injection Volume:
Variable Injection mode (SP8880 only) - 1 microliter to 300 microliters in 1 microliter increments (1500 µL with optional 2.5 mL syringe).
Fixed Loop mode - 20 microliter standard, 10, 50, 100, 200, and 500 microliter loops available.
o Precision: 0.5% RSD at 10 µL for fixed loop mode and 1.0% RSD at 10 µL for variable volume mode. Precision values are based an a properly maintained instrument that is tested under the conditions stated in Appendix C.
o Number of injections per vial: 1 to 10.
o Minimum volume required: 5 microliters for a 1 microliter injection using an optional microvial (P/N 3115-0400).
o Sample vial: 2 mL glass with Teflon-faced septum and screwcap. Optional microvial permits sampling from limited sample volumes.
o Cycle time: 2 minutes between samples for 20 microliter injection using variable volume injection mode.
o Analysis time: up to 9,999 minutes, or longer under external control.
o Gradient delay: up to 99.99 minutes.
o Inputs/outputs (standard) :
Inject hold input; Gradient Start output; Pump Stop output; Inject Signal output; +5 Volt, 30 mA output.
o BCD output and control board (Optional on SP8880 only): Vial Position information and remote Autosampler mechanism control.
o Communications board (standard on SP8880): Provides all features of BCD board above plus RS-232-C communications and LABNET for complete System communication and synchronization. Also provides 4 timed event outputs and equilibration delay up to 99.9 minutes.
o Bar code label reading (Optional) : Provides bar code label reader for positive sample identification. The label is read and file conditions selected as the vial is lifted to the fixed sampling needle.
o Power requirements: 90-130 VAC 50/60 Hz or
200-265 VAC 360 VA 50/60 Hz
o Environment: +100 to +400 C, 20% to 95% non-condensing relative humidity.
o Weight: 43.0 lbs (19.5 kilograms)
o Dimensions: Width Height Depth
15.0 inches 9.75 inches 22 inches
(38 cm) (25 cm) (56 cm)
The Spectra 200 UV-Vis Detector is a programmable, variable wavelength ultraviolet/visible absorbance detector for liquid chromatography. The instrument is capable of performing applications from capillary to preparative scale in an easy-to-use, powerful and flexible instrument.
Wavelength Range: 190800 nm with standard Deuterium and Tungsten lamps.
Band Width: 6 nm
Wavelength Accuracy: ± 1nm
Wavelength Precision: ± 0.1nm
Optical Methodology: Standard Deuterium lamp (190365 nm) and Tungsten lamp (366800 nm) light sources with concave holographic grating monochromator with double-beam optics, and provisions for purging the monochromator.
Range Selections: 0.0005 to 7.9995 AUFS, in 0.0005 AU increments on any of the recorder outputs.
Absorbance Ratio: Displayed as ratio of absorbances (at the two selected wavelengths) per full-scale range; plotted as log of ratio of absorbances per full-scale range.
Recorder Outputs: 10 mV, 100 mV, or 1.0 V output in any combination on the four recorder outputs.
Integrator Outputs: .5 V per AU (2 AU/V).
Remote Controls: Rear panel input for Auto Zero and external RUN; RS-232-C serial interface for computer control and/or data acquisition; DPDT relay closure for optional auto-scan valve control and/or peak-detection driven fraction collector.
Noise: < ± 1.0 x 10 -5 AU at 254 nm with 1.0 sec rise time.
< + 1.0 x 10 -5 AU at 546 nm with 1.0 sec rise time.
Drift: <2 10 -4 AU/hour after 1 hour warmup.
Zero Adjust: Plus or minus any amount by auto zero or by manual entry.
Rise Time Filter:
Digital active filter with rise times selectable from 0.0 to 9.9 sec (divide by 2 to convert to an equivalent time constant).
Flowcells:
Pathlengths from 10 mm to 0.0 mm, cell volumes from 0 to 15 microliters, stainless steel, titanium, or Ke1-F contact materials, sapphire Windows. 1000 psi pressure rating for stainless steel cells, 500 psi pressure rating for Kel-F cells, 2,000 psi pressure rating for variable pathlength preparative cells; 7,000 psi pressure rating for high pressure microbore cell.
Ihr Labexchange-Team hilft gerne weiter:
Christian Schmid Labor und Analytik, Laboreinrichtung, Life Science
Hubert Sauter Spektroskopie, Chromatographie