AA-6800F/6800G Common Specifications

Spectro

photometer

Measurement Wavelength Range

190~900nm

Mounitng

Aberration-corrected Czerny-Turner mount

Bandwidth

0.1, 0.2, 0.5, 2.0, 5.0 nm (6-step automatic switching)

Lamp

Number of Lamp Sockels

Photometrie Method

8 lamp sockets, 2 lamps simultanously lit (1 for warming up)

High-speed seif reversal method (BGC-SR)

High-speed 2-frequency simultanous measurement (BGC-D2)

Lamp Mode

EMISSION, NON-BGC, BGC-SR, BGC-D2, D2

Data Processing

Software Environment

Parameter Setting

MS-Windows ^TM 95

Wizard Method

Measurement Mode

Flame continuous method, Fumace method

Concentration Conversion Mode

Repeat Measurement

•Calibration Curve (selectable arnong 1st, 2nd, 3rd order function)

•Standard addition method/Simple Standard addition method (1st order function)

•Max. 10 repetitions

•Indication of Average, Standard deviation (SD) and Relative Standard Deviation (RSD)

•Exclusion of deviant value based an SD value and RSD value

Baseline Correction

Automatic baseline dritt correction using electrical double beam Signal processing (Furnace)

Sensitivity Correction

Automatic calibration curve correction System by sensitivity observation.

Table Data Processing Functions

Multitask

Actual concentration calculation using Weight factor, Dilution factor, Volume factor and Correction factor.

Word processor Software or the like can be used while executing measurement.

Loading Parameters

Template function

Procedure/Result Display

MRT Work Sheet (MRT: Measurement Result Table)

Result Print

Summary Report

QA/QC

Correlation factor, LCS, SPK, Sample upper limt, %RSD

Power Requirements

Dimensions, Weight

AC100, 120, 220, 230, 240V switching incorporated, 600VA, 50/60Hz

Additional power for personal Computer is necessary‑

W 1080 X D550 X H460mm, 100kg (including gas controller. not including PC)

Ambient Temperature Range

10°C ~ 35C

Ambient Hurt udity Range

45% ~ 80% (less than 70% if temperature is over 30°C)

AA-6800F Specifications

Burner Unit

Type

Air-cooled pre-mix type

Bunter Head

Pure Titanium

Nebulizer

Pt-Ir capillary with Teflon orifice,

Impact bead is inseparable. Fluoric acid is usable.

Chamber

Polypropylene

Positioning

Bumer/Fumace automatic switching by motor drive

Automatic searching for optimum burner height

Gas Controller

Flow Rate/Pressure Control

Automatic flow rate settin-,

Automatic searching for optimum gas flow rate

Safety Measures

•Automatic gas leak check     • Air-C ₂ H ₂ flame priority ignition

•Air/N ₂ 0 auto switching with C ₂ H ₂ flow rate monitor (optical Sensor)

•Prevents raw gas discharge             • Prevents usage of wrong burner head

•Pressure monitor to prevent flashback at abnormal pressure

•Safety extinction by automatic detection of momentary power failure

•Drain tank water level monitor to prevent flashback

AA-680OG Specifications (GFA-6500 Specifications)

Heating Temperature Range

Ambient~3000 °C

Heating Control Method

•Drying: Current control method

•Ashing/Atomizing: Optical temperature control method

Heating Parameter settings

•Max. 20 stages           • Heating mode: RAMP/STEP

•Inner gas type: 2-line switching         • High sensitivity setting

•Furnace concentration boost cycle: Max 20 times

•Innen gas flow rate: 0~1.5 L/min

•Optimum fumace program search function

Cooling water/Ar Consumption

Power Requirements

•Cooling water: 1.0 L/min or larger     • Gas: Max. 3.0 L/min

•AC200V Max.6kVA, 50/60Hz

Power Supply Unit, Dimension and Weight

•W42XD29XH460 (innt). 442 (Power supp1.v unit fins in space behmd 14 mit unit. Main unit width on1.v needs to be considered.)

For Flame and Furnace

Control

By RS-232C with AA

Function

Origin search

Self diagnosis

Automatic rinsing

Automatic preparation

Random access

Number of sample

8 for Reagent

60 for Sample

(random access available for both)

Sample cup

Sample : 15ml (testing tube for Flame) or 2ml (vial for Furnace)

Reagent : 20ml

Rinne nozzle

Discharge rinsie liquid from nozzle (for Furnace)

Intake rinse liquid from nozzle (for Flame)

Bottle for rinse liquid

2l

Power

AC100V ~ 240V (auto sensing), 100VA

Dimension • Weight

For Flame : W330 x H320 x D295mm. 7.5kg

For Flame and Furnace : W430 x H320 x D360mm, 15kg

For Furnace only

Function

Automatic dilution

Automatic reagent addition

Syringe

250µl

Injection volume

2 --100µl

Reproducibility

1% R.S.D (20µl)

Cary over

Rinsing port :under 0.00001

Mixing port :under 0.00001

Rinsing Mixing port

With rinse liquid

With next sample

Mixing

In the mixing port

Maximum volume for preparation: 0,6ml

Number of reagent

for addition

Maximum 4

Number of liquids for mixing

Calibration method : Maximum 5 (one sample + 4 reagents)

Standard addition method : Maximum 6 (one sample + one

Standard + 4 reagents)

Auto dilute and

re-analyze

When the absorbance exceeds the range of the calibration curve:

The Optimum dilution ratio is automatically set.

(When it can not be calculated ,the dilution ratio is fixed at 10 times.)