Perkin Elmer TurboMatrix 110
- Mehr Informationen
- Status, Liefer- und Zahlungsbedingungen
- Technische Spezifikationen
- Weitere Produkte
Objektnummer | B00017743 |
---|---|
ID-Nummer | 017743 |
Objektbezeichnung | Perkin Elmer TurboMatrix 110 |
Status | Archiv |
Status, Liefer- und Zahlungsbedingungen
Geräteüberprüfung
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Versandzeit
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Versandarten
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Lieferinformationen
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Zahlungsbedingungen
Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land |
Mögliche Zahlungsarten |
Bemerkung |
DE, AT, CH |
Rechnung, Vorkasse |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
NL, BE, LU |
Rechnung, Vorkasse |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
Alle weiteren Länder |
Vorkasse |
|
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Statusdefinition
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status |
Zustand |
Bemerkung |
Sofort verfügbar |
gebraucht |
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden. |
Lagergerät |
gebraucht |
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel. |
Anbieter |
gebraucht |
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten. |
Neugerät |
neu |
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist. |
manufacturer : Perkin Elmer
model : TurboMatrix 110
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
For added flexibility to meet your laboratorys changing requirements, five different PerkinElmer" TurboMatrix" Headspace (HS) sampler models are available:
TurboMatrix HS 16 16 vials with overlapped thermostatting of one vial.
TurboMatrix HS 40 40 vials with intelligent, overlapped thermostatting of up to 12 vials. TurboMatrix HS 110 110 vials with intelligent, overlapped thermostatting of up to 12 vials.
TurboMatrix HS 40 Trap 40 vials with intelligent, overlapped thermostatting of up to 12 vials plus built-in trap for lower detection limits.
TurboMatrix HS 110 Trap 110 vials with intelligent, overlapped thermostatting of up to 12 vials plus built-in trap for lower detection limits.
Hardware
Sample vials
Use PerkinElmer 22-mL sample vials (Part Number B0104236) for a maximum liquid sample volume of 15 mL. With the low-volume vial adapters (Part Number N6120110), the TurboMatrix HS 16 and TurboMatrix HS 40 models can also use 6-mL sample vials (Part Number N9302134) for a maximum sample volume of 2 mL. The 6-mL sample vials cannot be used on the TurboMatrix HS 110 models.
Note: Use of non-PerkinElmer sample vials and patented cap enclosures is NOT recommended and system performance problems resulting from the use of non-PerkinElmer vials and caps will NOT be covered under the system warranty.
Sample thermostatting
Solid aluminum thermostatting oven (available on TurboMatrix HS 40 and HS 110
thermostatting models only). Thermostatting period and temperature precisely controlled for each sample. Software algorithm automatically optimizes sample thermostatting overlap.
Sample temperature
Temperature settable from 35 ˚C to 210 ˚C in 1 ˚C increments or can be run at ambient.
Sampling needle
Stainless steel, platinum/iridium (optional), Siltek T- (standard on trap models).
Temperature settable from 35 ˚C to 210 ˚C in 1 ˚C increments or can be run at ambient.
Transfer line length
Choice of 1008 mm (standard) or 1650 mm.
Transfer line temperature
Temperature settable from 35 ˚C to 210 ˚C in 1 ˚C increments or can be run at ambient.
Transfer line system
Deactivated fused-silica capillary transfer line or capillary column (0.32-µm i.d. or 0.25-µm i.d.) shielded inside a heated transfer tube between the headspace sampler and GC injector.
Column compatibility
Compatible with all capillary-column diameters in split and splitless (direct coupled) mode. Oncolumn sampling using 0.25, 0.32 or 0.53-mm i.d. capillary columns and 1/8-inch o.d. packed columns.
Sampling method
Pneumatic, pressure-balanced sampling (no syringe or gas sample loop). Sample vials are
pressurized with carrier gas. During the injection period, carrier gas flowing to the GC system is replaced by pressurized sample gas. Rapid transfer of analytes is ensured without re-equilibration in a gas-sampling valve or syringe and subsequent loss of analytes. Injection amount is programmable by time or by volume without requiring any hardware change.
For headspace-trap sampling, the gas is focused on a sorbent trap before injection into the GC. This can be done for up to four cycles.
Analyte compatibility
Polar and non-polar organic compounds can be analyzed without any change of internal tubing. Low risk of sample-composition change during analyte transfer. Analysis of chemically-active compounds such as free volatile organic acids, sulfur compounds, amines and other nitrogen-containing organic compounds can be performed using the optional platinum/iridium or Siltek needle.
Pneumatic control
Choice of:
Manual pneumatics using built-in pressure regulator (0-60 psig), non-trap models only.
Electronically-controlled Programmable Pneumatic Control (PPC) module (0-60 psig).
Modes of operation
Constant mode
Routine analysis mode with constant, equal thermostatting time for each sample. Includes
intelligent, overlapped thermostatting to automatically optimize oven movement for maximized sample throughput.
MHE mode
Multiple headspace extractions from each vial. Up to nine extraction steps with intermediate
vent performed automatically. For use in method development and validation or for routine analysis of special samples.
Progressive mode
Method-development tool used in determining required equilibration time and in performing
kinetic studies. Thermostatting time is automatically increased to determine optimal thermostatting time.
Control
Standalone operation
Each headspace sampler is a self-contained standalone unit. All instrument functions are easily controlled from the touch screen of the built-in graphical user interface (GUI). Set and actual values may be displayed at any time. Configurable user interface for simplest possible interaction.
Simple one-touch operation
Single-method operation
Sequence-based multimethod operation of up to eight methods
Password protection
Ten operating methods can be stored in the instrument
Parameters remain stored with last-used method directly available after power-up
Operating languages
English, French, German, Italian, Japanese, Chinese, Spanish and Russian (GUI).
Software control
A Remote Control Software (RCS) package is available to control the headspace samplers from a Microsoft® Windows environment.
Complete, integrated control from TotalChrom® software.
Gas chromatograph/ data system interfacing
Output signal lines for READY and RUN to start gas chromatograph (GC) and data-handling devices. Input lines for START, STOP and READY to control the headspace unit externally.
Six built-in relays (4 with contact closures, 2 with 24-volt outputs).
Economy mode
Programmable power-saving and gas-saving feature with automatic wake-up function.
Priority vial
One or two-vial positions can be assigned to priority vials. Urgent vials can be placed in these positions and will be inserted into the analysis sequence for quickest possible analysis. Available for the TurboMatrix HS 40 and TurboMatrix HS 110, non-trap and trap models.
Maintenance alarms
Settable injection counter with a customizable display alerts users to perform routine maintenance.
System integrity checks
Automatic system leak checking
Static leak checks: Checks the whole system for leaks prior to analysis
Automatic vial leak checking
Dynamic leak check: Checks each vial for leaks as it is sampled (PPC systems only)
Optional accessories
Shaker
Patented, intelligent frequency shaker for quicker sample-specific equilibration during ther‑
mostatting. All vials are agitated simultaneously to allow quicker equilibration. Automatic frequency-checking program optimizes the agitation process. Available for the TurboMatrix HS 40 and TurboMatrix HS 110, non-trap and trap models.
Cryofocusing/water trap
On-column cryofocusing accessory for preconcentration of analytes and improved detection
water trap limits. Water trap included to allow large-volume sampling from aqueous samples without ice blockage. Available for the TurboMatrix HS 40 and TurboMatrix HS 110, non-trap models only.
BCD output
Output of sample number to external device. Standard on TurboMatrix HS 110, non-trap and
trap models.
Injector adapter kits
Injector adapter kits are available for most contemporary GCs. Side-mount kit available for
PerkinElmer Clarus®, AutoSystemTM and AutoSystem XL GCs.
Removable sample tray
Extra sample trays for vials to be loaded into while instrument is running. Available for the TurboMatrix HS 40 and TurboMatrix HS 110, non-trap and trap models.
Clarus injector interface
Special hourglass-injector insert to connect the fused silica transfer line from the headspace sampler to the capillary column provides the performance advantages of a direct connection, while still maintaining the convenience of connecting to a split injector.
Physical details
Ambient operating Temperature range: 15 °C to 32 °C
conditions Humidity: 75% maximum RH without condensation
Power requirements 100/120/240 V; 50/60 Hz; 900 VA
TurboMatrix HS 16 TurboMatrix HS 40 TurboMatrix HS 110
( non-trap and trap) ( non-trap and trap)
Width 43 cm (17 in) 43 cm (17 in) 43 cm (17 in)
Depth 58 cm (23 in) 61 cm (24 in) 61 cm (24 in)
Height 61 cm (24 in) 61 cm (24 in) 61 cm (24 in)
Weight 32 kg (70 lb) 33 kg (73 lb) 35 kg (77 lb)