JavaScript scheint in Ihrem Browser deaktiviert zu sein. Um unsere Website in bester Weise zu erfahren, aktivieren Sie Javascript in Ihrem Browser.
24 Monate Gewährleistung
60 Tage Labexchange Vollgarantie
Funktions-Zertifikat
Rückgaberecht
Optionale Garantieverlängerung bis auf ein Jahr
Optionale Geräteinstallation für sofortige und sichere Gerätenutzung
Attraktive Miet- und Leasingangebote schonen Ihr Budget
Fragen zu diesem Gerät
Der Gewährleistungszeitraum für unsere Geräte beträgt 24 Monate ab Anlieferungsdatum.
Alle Gebrauchtgeräte von Labexchange werden vor der Auslieferung einer technischen Überprüfung unterzogen und werden nur ausgeliefert, wenn sie einwandfrei funktionieren. Die Überprüfung und Funktionsfähigkeit wird durch einen Servicebericht unabhängiger Servicefirmen dokumentiert. Die Labexchange Vollgarantie beträgt 60 Tage ab Anlieferungsdatum. Auftretende Fehlfunktionen werden innerhalb der Garantiezeit kostenlos durch uns behoben. (Gültig für Länder innerhalb der EU und CH)
Die Überprüfung und die Funktionsfähigkeit unserer Geräte werden zusätzlich zum Servicebericht mit einem Funktions-Zertifikat dokumentiert.
Mit unseren gebrauchten Laborgeräten und Analysesystemen sind Sie auf der sicheren Seite!
Für noch mehr Sicherheit beim Kauf räumen wir Ihnen das Labexchange Rückgaberecht ein. Geben Sie Ihr Laborgerät oder Analysesystem ohne Angabe von Gründen einfach zurück.
Es gelten unsere spezifischen Geschäftsbedingungen:Labexchange Rückgaberecht(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/Rueckgaberecht_08_18_D.pdf)
Auf Wunsch prüfen wir die Möglichkeit einer Garantieverlängerung für Ihr Gerät. Falls möglich, beträgt die Garantiedauer 6 Monate bei einem Aufpreis von 10% auf den Listenpreis und 1 Jahr bei einem Aufpreis von 20%. (Gültig für DE, AT, CH, FR, NL, BE, LU, GB und IR)
Gehen Sie auf Nummer sicher! Unsere qualifizierten Techniker installieren das Gerät zu Ihrem Wunschtermin im Labor, damit Sie schnell und sicher mit ihrem neuen Laborgerät arbeiten können.
Die Geräteinstallation durch Labexchange bringt Ihnen weitere Vorteile. Sie erhalten hierdurch eine Garantieverlängerung auf 3 Monate und haben zudem ein Anrecht auf die Labexchange Rückkaufgarantie.
Sensible Laborgeräte und Analysesysteme sowie ein Großteil der verfügbaren Laborabzüge erhalten Sie bereits inklusive Installation. Wir bieten Ihnen gerne die Installation Ihres Laborgerätes an.
* Pflichtfelder
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land
Mögliche Zahlungsarten
Bemerkung
DE, AT, CH
Rechnung, Vorkasse
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich.
NL, BE, LU
Alle weiteren Länder
Vorkasse
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status
Zustand
Sofort verfügbar
gebraucht
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden.
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel.
Anbieter
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten.
Neugerät
neu
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist.
Firma: Milton Roy
Modell: LDC 200
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
General
The spectroMonitor® D variable wavelength detector is designed for applications requiring the measurement of ultraviolet light absorption through a column effluent. Small cell volumes and high sensitivity make it well-suited for use as a detector in high performance column liquid chromatography, although it is not necessarily limited_
to this application. This instrument is designed for years of trouble-free service. If difficulty is experienced, please write or call LDC/Milton Roy, Riviera Beach, Fla. or your nearest regional office for assistance. See page IV-3 for locations and telephone numbers.
The spectroMonitor® D provides wavelength coverage in the UV/visible wavelength range of 190 to 700 nm. The cell has a zero dead volume, dual path, flow type configuration. A dual beam (sample reference) optical system is used to compensate for source energy variation and as the reference cell is a flow thru type, it may also be used for solvent absorbance compensation. Minimum spacing of sample and reference beams is achieved by a precision quartz fiber optic beam splitter which focuses both beams on their respective cell paths.
Wavelength dispersion is accomplished by means of a concave holographic diffraction grating. Entrance and exit slits are defined by the source and beam splitter geometry rather than by discrete slits. The concave nature of the grating focuses the entrance slit on the exit slit without the usual two concave mirrors The simplicity of this type of monochromator enhances stability and reliability, maximizes energy throughput, and simplifies adjustments.
...for LDC/Milton Roy spectroMonitor® D, when equipped with the standard maxN"" Series LS-23 cell, and operating at 25°C:
POWER REQUIREMENTS : 100, 120, 220 or 240 VAC + 10%, 50/60 Hz, 100W.
Integral filter supresses external line noise.
FUSES: 100, 120 VAC, 1.5 Amps ; 220, 240 VAC, 0.75 Amps (Slo-Blo).
WEIGHT: 20.75 lbs. (9.41 Kg).
DIMENSIONS: 11" (27.44 cm) W x 18" (45.7 cm) D x 5 3/4" (14.6 cm) H.
FLUID CELL TYPE: maxNn" Series high efficiency, 1000 psig. 10 mm pathlength, with flowing reference, 316 stainless steel, removable from front of instrument. Zero dead volume high flow efficiency design (suitable for microparticulate column packing materials).
FLUID CELL VOLUME: 14 uL sample and reference cells (f ul l 10 mm path lengt h) .
FLUID CELL PRESSURE: 1000 psi, designed to eliminate cross contamination (recycle and series detection compatible).
SPECTRAL BANIMI DTH: 5 nm. 1.4.9 WAVELENGTH RANGE : 190-700 nm.
ABSORBANCE RANGES: Eleven steps from .001 to 2.0 absorbance units full scale (AUFS) as follows:
.001 .100
.002 .200
.005 .500
.010 1.000
.020 2.000
.050
RESPONSE TIME: Switch selectable active filter, 0.05, 0.1, 0.5, 1.0 and 5.0 seconds (1.0 second specification setting).
ENERGY SOURCE: 35-Watt deuteriun lamp (incorporating a window with high UV transmittance). The lamp filament heater current can be switched off or reduced by one-half during normal operation. Single energy source for both UV and visible ranges.
MONOCHROMATOR: Concave holographic grating.
OPTICAL SYSTEM: Double beam, polished quartz fiber optic beam splitter.
DETECTION: Dual UV enhanced silicon photovoltaic cell.
NOISE: Noise levels may vary at wavelength extremes. Short term noise, dry cell, (peak-to-peak) at 1 second response time is typically less than:
2x10 -5 AU@200-300 nm
3 x 10 -5 AU @ 350 nm
3 x 10 -4 AU @ 550 nm
3 x 1,0 -4 AU @ 650 nm
The new LDC/Milton Roy spectroMonitor® D variable wavelength detector sets the new industry standard for high performance liquid chromatography (HPLC) spectrophotolnetric detectors. Differential absorbance measurements can now be made in the UV/VIS wavelength range of 190 through 700 nm without lamp changes. Plus, the new maxN'" Series high efficiency, high pressure fluid cell Features the lowest noise specification available only 2.0 x 10-5 AU. An integral very low volume heat exchanger
insures temperature equilibration and low baseline drift - less than 1 x 10 -4 AU per hour.
LDC/Milton Roy has achieved these remarkable noise and drift levels with a true 10 mm pathlength cell. Detectors which achieve low noise through the use of
short pathlength cells are not as senstive. For example, a detector having mm path cells will produce peaks (sign only one half as large as the spectro--, Monitor® D variable wavelength detector
DRIFT: Less than 1 x 10 -4 A.U. per hour (after warm up) in the UV ran,
LINEARITY RANGE : Linear to 2.0 AUFS 1% deviation (typical).
ZERO SUPPRESSION: Front panel and remote automatic zeroing for a ran; of +.75 AU.
RECORDER OUTPUT: 0 to 10 mV, 5 maximum source impedance.
COMPUTER OUTPUT: 1.0V per A.U.: 1K source impedance.
MATERIALS OF CONSTRUCTION
(Wetted surfaces only) : 316 stainless steel, Teflon® and quartz.
FLUID CONNECTION: .010" ID x
1/16" OD 316 stainless steel tubing accepts all 1/16" standard zero dead volume fittings.
FRONT PANEL DIAGNOSTICS:
A. Direct Reading of Absorbance Units.
B. Direct Reading of Sample and Reference Energy.
C. Direct Reading of Source Lamp filament current.
D. Direct Reading of Zero correction
E. LED Indicators for supply voltage (+ 15VDC).
FRONT PANEL SIGNAL POLARITY REVERSAL.
FRONT PANEL EVE NT MARK BUTTON.
OPTIONAL FLUID CELLS: Prep, and Semi-Prep/maxN®, 3mm/ 1 uL/microCelln'.
Dual beam configuration provides excellent long term baseline stability and allows the use of a reference cell to compensate for mobile phase background absorbance. This makes it possible to find the peak absorbance wavelength by scanning manually .
Optical components common to the dual beam utilize optical and mechanical components which function symmetrically with both beams, thus noise and drift are held to a minimum. Additionally advantageous is the fact that aging of components is in common with both sides, as are wavelength-dependent characteristics.
Alignment of the optical system is greatly simplified by using the source lamp aperture as the entrance slit to the monochromator (easy replacement of lamp) and by incorporating the exit slit and beam splitter into one component.
Events such as time of sample injection can be recorded by pressing the MARK button.
Optics simplicity provides ease of maintenance, and minimum transmission and reflecting surfaces.
Integral heat exchange fluid cell reduces flow sensitivity.
Solvents contact materials of 316 SS, Tefloe and fused silica only.
A maxN'" Series LS-23 Fluid Cell has been incorporated in the spectro-Monitor® D, and is available for all previous spectroMonitor® III's as a factory or retrofit option. Some advantage s of the maxN"" cell are:
A. Optimized plate count in microparticulate column s without sacrificing detector sensitivity (signal/noise).
B. Improvement of bubble clearing by enabling slight back pressure to be added to the fluid cell (1000 psig mal
NOTE: Back pressure regulators are 1 commercially available for adjusting the exact back pressure required.
C. Additional detectors can be added downstream without exceeding detector pressure rating (1000 psig).
D. Recycle chromatography is possible with the appropriate pump or valve arrangement.
E. The cell will accept higher flaw rates without leakage.
Holographie grating reduces spurious wavelengths and allows high levels of usable throughput energy.,
A computer output signal of 1V/ is provided for data reduction, and an output signal of 10 millivolts, full scale, is provided for recording absorbance.
This ins t rumen t is configure d into a single unit housing the cell, optics, and measurement electronics. The unit contains output signal ports for recording purposes, electronic controls, and power supplies.
The sample stream and a reference stream (if desired) are connected to t measurement cell at the inlet tubes (labeled SAMPLE IN and REF IN). Separate outlet tubes near their respective inlets are provided for connection for further processing or sample collection.
The new LED Diagnostic Circuitry, introduced in the spectro Monitor D, provides the chromatographer with a switch selectable digital display to indicate the follwing:
A. AU: Direct reading of absorbance units.
B. ENERGY (S and R): Direct Sample and Reference readings in mV. Record the mV readings at various wavelengths with the clean, new cell for future reference. A decreased reading at a later time may indicate a contaminated cell or lamp deterioration.
C. DACE: Direct reading of filament current at the deuterium source lamp. Typical display with a healty lamp is approximately 300 mA.
D. ZERO: Displays (in absorbance units) amount of zero correction applied.
E. +15V: Proper operating voltages are indicated by a separate two-color LED. When green, it indicates proper supply voltages (+15V) are present in the signal processing circuits. When red, either the positive (+), the negative (-), or both supplies are abnormal.
A single pushbutton on the front panel automatically zeroes the detector, signal. The autozero function will compensate for +0.75 AU of background. This helps to eliminate the often tedious adjustments normally associated, with the initial setting of detector baseline. The autozero function is also valuable tool in resetting baseline, after wavelength, solvent or temperature changes.
An offset adjustment on the front panel allows the user to shift the recorder baseline and still maintain automatic zeroing.
Ihr Labexchange-Team hilft gerne weiter:
Christian Schmid Labor und Analytik, Laboreinrichtung, Life Science
Hubert Sauter Spektroskopie, Chromatographie