manufacturer :       Isco

model :                   SCFE

annotation :           Dokumente engl .

SFX 220 Extractor technical specifications

Dimensions

Height: 10" (25.4 cm)

Width: 10.5" (26.7 cm)

Depth: 8.5" (21.2 cm)

Net Weight    

30 lb (13.6 kg)

Electrical Requirements

110 Vac ± 25 Vac (7.5 A)

220 Vac ± 31 Vac (3.5 A)

Line Frequency

50/60 Hz

Power Consumption

820 Watt (not including pump)

Ambient Temperature Range

0°C to 40°C

Humidity

0% to 90% non-condensing environment

Temperature Control Limits

Ambient to 150°C

Maximum Operating Pressure

10,000 psi (70 MPa )

Wetted Materials

Stainless steel; Type 303, 304 and 316 stainless steel; Nitronic 60; Teflon ^Tm ;

PEEK ^Tm ; artificial ruby and sapphire; 17-4 PH stainless steel

Minimum Valve Life

50,000 cycles at 150°C and 10,000 psi

D Series pump specifications

Power Requirements

100 ± 10 Vac , 250 VA maximum

117 ± 12 Vac , 250 VA maximum

234 ± 23 Vac , 250 VA maximum

Line Frequency

50 or 60 Hz

Line Voltage Noise Tolerance

1.7 x nominal rms line voltage, 10 µsecond pulses, any phase angle, random or repetitive

Dimensions

Pump                                                  Controller

------------------------------------------------------------------------

Width: 27.18 cm (10.7")                     27.18 cm (10.7")

Depth: 46.74 cm (18.4")                     30.48 cm (12")

Height: 101.09 cm (39.8")                   13.59 cm (5.35")

Weight

Pump                                                  Controller

------------------------------------------------------------------------------------------------------

100DX             32.8 kg (72.4 lbs )                                2.96 kg (6.53 lbs )

260D                31.9 kg (70.3 lbs.)

Flow Rate Range

100DX             0.01 µl/min to 50 ml/min (for any pressure up to 10,000 psi )

260D                1.0 µ1/min to 97 ml/min (for delivery at a pressure below 4,000 psi )

1.0 µ]/min to 90 ml/min (for any pressure up to 7,500 psi )

Flow Rate Accuracy*

100DX             ± 0.3% (maximum 0.25 µl/min seal leakage)

260D                ± 0.5% (maximum 0.50 µl/min seal leakage)

Flow Rate Display Resolution

100DX             0.01 µl/min [1.0 µl/min in Constant Pressure Mode]

260D                1.0 µ lmin

Displacement Resolution

100DX             9.65 nl

260D                16.63 nl

Refill Time

100DX             1.72 minutes

260D                2.5 minutes

Refill or Depressurization Rate     (At any pressure from 0 to 10,000 psi )

100DX             0.01 µl/min to 60 ml/min

260D                1.0 µl/min to 107 ml/min

Pressure Accuracy

± 2% of full scale

Pressure Repeatability

± 1% of full scale within 48 hours

Pressure Display Resolution

1.0 psi

Ambient Temperature Range

0 to 40 °C

Humidity

100% relative humidity maximum up to 20 °C and 90% above

20 °C if left connected to the mains

Cylinder Capacity

100DX             102.93 ml

260D                266.05 ml

Dead (Headspace) Volume**

100DX             1.30 ± 0.020 ml

260D                2.10 ± 0.020 ml

*   Using water at 2,000 psi and temperature controlled environment at 30 °C.

**NOTE: Volume in and above the piston seal, head clearance at automatic shutoff, and inlet    

    and outlet Ports to the fittings.