Idaho 2380
- Mehr Informationen
- Status, Liefer- und Zahlungsbedingungen
- Technische Spezifikationen
- Weitere Produkte
Objektnummer | B00013877 |
---|---|
ID-Nummer | 013877 |
Objektbezeichnung | Idaho 2380 |
Status | Archiv |
Status, Liefer- und Zahlungsbedingungen
Geräteüberprüfung
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Versandzeit
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Versandarten
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Lieferinformationen
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Die angegebenen Fracht- und Verpackungskosten beziehen sich auf den günstigsten Transportweg und sind vorbehaltlich unvorhergesehener Kostensteigerungen. Durch unvorhersehbare Ereignisse können sich die Frachtraten und die Lieferzeiten jederzeit ändern und müssten der aktuellen Situation angepasst werden. Incoterm-Kodierung gemäß Incoterms 2010: Bei Selbstabholung EXW, bei Sendungen per Schiff CFR, per Luftfracht CPT, übrige Sendungen DAP. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Zahlungsbedingungen
Wir akzeptieren keine Zahlung per Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land |
Mögliche Zahlungsarten |
Bemerkung |
DE, AT, CH |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
NL, BE, LU |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
Alle weiteren Länder |
Vorkasse, Kreditkarte |
|
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Statusdefinition
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status |
Zustand |
Bemerkung |
Sofort verfügbar |
gebraucht |
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden. |
Lagergerät |
gebraucht |
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel. |
Anbieter |
gebraucht |
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten. |
Neugerät |
neu |
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist. |
Labprocure |
gebraucht |
Verantwortlich für den Inhalt dieses Geräteangebotes ist die Labprocure GmbH als Geräteinserent. Labprocure übernimmt die Haftung für die hier inserierten Angebote und für die beinhalteten Fotos und Angebotstexte. Labprocure GmbH, Bruckstrasse 58, 72393 Burladingen. |
Firma: Idaho
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The Rapidcyclerm is a rapid tempeeture cycling system based an heat transfer by hot air to samples contained in thin capillary tubes. For most reactions, products can easily be visualized with ethidium bromide an agarose gels after a total reaction time of 15-30 minutes. The rapid temperature response of this instrument can improve product specificity significantly while decreasing the required reaction time by up to an order of magnitude.
Average temperature transition rotes in most instruments are commonly about 1° C/sec when metal blocks or water are used for thermal equilibration and samples are contained in plastic microfuge tubes. A significantfraction of the cycle time isspent heating and cooling the sample, as opposed to being spent at optimal temperatures. Long reaction times of 2-6 hours are common, and slow transition rotes make it difficult to determine optimal temperatures and times for each stage of the cyclic reactions. Instantaneoustemperature changes are notpossible because of sample, container and cycler heat capacities, "Second generation" instru m entation can complete 30-cycles in about one hour. lt is unlikely any instrument based an samples contained in conical tubes with heating and cooling through a metal block can achieve faster cycles at any price. However, with capillary tubes and air heating, transition Tates of 5-10°C/ sec are easily obtained. Complete 30-cycle reactions can be finished in os little as 10 min. Biochemical reactions are fast. The Rapidcycler is the first instrument engineered to match this speed.
The advantages of an air-cycling system include simplicity, low cost, and rapid temperature cycling. Air is an ideal heat transfer medium which can change temperature quickly because of its low density. Temperature homogeneity problems are solved by rapidly mixing air with a fan to provide homogeneous temperature exposure over the sample containers, The sample container is just os important os the heat transfer medium. An optimal sample container should be water-vaportight and have:
(i) low thermal mass,
(ii) good thermal conductivity,
(iii) minimal internal condensation,
(iv) easy sample recovery without cross contamination,
(v) No adverse effects an the reaction.
Whatever the containermaterial, temperatureequilibration will always be achieved faster if the sample volume is small, if the container wall is thin, and if the surface-tovolume ratio of the sample exposed to the container wall is high. Problems with condensation can be reduced by minimizing the free air space surrounding the sample.
vicrofuge tubes are kept water-vapor tight by mechanical closure and, if necessary, overlaid mineral oil. Thermal conductivity is poor because of the material and its thickness (about 1 mm). Internal condensation can occur if mineral oil is not used and particularly if different parts of the tube are at different temperatures.
Sample mixing by convection has been used in conical tube Instruments, The temperature gradients that cause convection are not a good Idea for a temperaturedependent reactions
Capillary tubes are kept vaportight by flame closure of the ends, They conduct heat to the sample better than microfuge tubes because of decreased wall thickness (ca. 0.2 mm) and a better surface-to-volume ratio. Dead air space is minimized to prevent significant condensation, Different volumes of a sample can be placed in the same diameter capillary tube so that rapid heattransfer is maintained,
After amplification, the ends of the glass capillaries can be quickly scored with a fite and snapped off with less risk of aerosolization and contamination than microcentrifuge tubes. The capillary tubes nerve both os a transfer pipette and a container for temperature cycling, The reaction product, already containing Ficoll and an electrophoresis indicator dye, can be directly emptied into a gel well without exposureto an intermediate pipette tip or to extraction procedures.
Decreasing the hegt capacity of the cycling system can markedly decrease the total time required for reactions that require temperature cycling, In addition, air cycling and miniaturization can significantly decrease the costs of reagents and the personnel time required to optimize reactions,