Dani 86.50
- Mehr Informationen
- Status, Liefer- und Zahlungsbedingungen
- Technische Spezifikationen
- Weitere Produkte
Objektnummer | B00011542 |
---|---|
ID-Nummer | 011542 |
Objektbezeichnung | Dani 86.50 |
Status | Archiv |
Status, Liefer- und Zahlungsbedingungen
Geräteüberprüfung
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Versandzeit
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Versandarten
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Lieferinformationen
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Die angegebenen Fracht- und Verpackungskosten beziehen sich auf den günstigsten Transportweg und sind vorbehaltlich unvorhergesehener Kostensteigerungen. Durch unvorhersehbare Ereignisse können sich die Frachtraten und die Lieferzeiten jederzeit ändern und müssten der aktuellen Situation angepasst werden. Incoterm-Kodierung gemäß Incoterms 2010: Bei Selbstabholung EXW, bei Sendungen per Schiff CFR, per Luftfracht CPT, übrige Sendungen DAP. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Zahlungsbedingungen
Wir akzeptieren keine Zahlung per Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land |
Mögliche Zahlungsarten |
Bemerkung |
DE, AT, CH |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
NL, BE, LU |
Rechnung, Vorkasse, Kreditkarte |
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich. |
Alle weiteren Länder |
Vorkasse, Kreditkarte |
|
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Statusdefinition
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status |
Zustand |
Bemerkung |
Sofort verfügbar |
gebraucht |
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden. |
Lagergerät |
gebraucht |
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel. |
Anbieter |
gebraucht |
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten. |
Neugerät |
neu |
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist. |
Labprocure |
gebraucht |
Verantwortlich für den Inhalt dieses Geräteangebotes ist die Labprocure GmbH als Geräteinserent. Labprocure übernimmt die Haftung für die hier inserierten Angebote und für die beinhalteten Fotos und Angebotstexte. Labprocure GmbH, Bruckstrasse 58, 72393 Burladingen. |
Firma: Dani
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
DESCRIPTION
DANI HSS 86.50 Head Space sampler is a single compact cabinet including:
· The Sampling System
· The Programmer
· The Pneumatic System
The Sampling System
The sampling system is consisting of three main devices:
· The sample vial tray
· The thermostated oven
· The Head space gas transfer device
The sample vial tray
The sample vial tray with 44 seats, is Iocated an the left side of the cabinet and it is driven by a DC motor. The standard vial volume is 20 ml, but the use of special adapters allows the sampling of 10 mI volume vials.
The thermostated oven
The thermostated oven contains a six seat rotating plate vial holder . The maximum operative temperature is 200°C, with an increment of 1°C.
The vial transfer system consists of a mobile fork carried on a bridge. This transfer system withdraws the set vial from the vial tray seat and drops it into the thermostated oven, through an inlet/outlet hole, placed at the top of the oven.
The thumbscrew allows the opening of the oven upper cover.
During the incubation time, the vials can be shaked. The left lateral panel can be removed to accede to the electronic boards.
The Head Space gas transfer device
The Head Space gas transfer device is based on the "VALVE and LOOP" System and it is housed in a thermoinsulated box. The sampling probe, the switching valve and the loop build up the manifold; it is temperature controlled and can operate at a maximum temperature of 200°C, with an increment of 1°C. The transfer of the gas Sample, from the 86.50 to the gas chromatograph, is performed by means of a heated transfer tube. The manifold and the transfer tube are heated to prevent cold spots. At the bottom left side of the unit, the program panel is placed.
On the top of the cabinet are located:
- The Carrier gas pressure reducer knob
- The Auxiliary gas pressure reducer knob
The Programmer
Fully microprocessored, it provides the complete control of the sampling System allowing up to four preprogrammed analytical methods. The analytical method includes all the parameter values (temperatures, incubation time, number of repetitive analysis an the same sample etc.) and the valve timing of all the operative steps (pressurization, sampling, venting etc.).
The PANEL is divided in three sections:
· Valve timing section
· Display section
· Control key section
The valve timing section
The valve timing section allows the Operator to set-up the valves actuation in an analytical cycle.
The display section
The display section includes sixteen alphanumeric characters.
The control section
The control section includes seven keys and live status lamps.
The Pneumatic Circuit
The HSS 86.50 sampling system, consists of a "valve and loop" device, which allows to inject into the GC a precise and known amount of the gas phase contained in the sample vial.
Gas Lines
The gas line feeding the unit is divided in two streams:
- CARRIER including a pressure regulator, the output of which is connected to the port 4 of the switching valve.
- AUX including a pressure regulator, a restrictor, the output of which is connected to the electrovalve "PRESS" and then, through a Tee connection, to the electrovalve "VENT" and to the port 2 of the switching valve.
Pressure evaluation of both gas Iines is provided by an electronic pressure transducer with readout an the display.
Technical Specification
DANI HSS 86.50 HEAD SPACE SAMPLER VIALS
Number of vials 44
Vial material neutral glass
Vial volume 20 ml
10 mI (with adapter)
Vial septa PTFE coated butyl rubber
PTFE coated silicon rubber
Vial aluminium ring
OVEN
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 0.5 % full scale
Stability ± 0.5°C
Heating electrical, with forced air
MANIFOLD
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 1.0% full scale
Stability ±0.5°C
Heating electrical
Sampling Valve MV 65/106 HT, 6-port valve
Sampling loop 1 mI volume, nickel
3 ml volume, nickel (optional)
TRANSFER TUBE
Temperature 15°C above room temperature to 220°C, 1°C increment
Accuracy 2.0% full scale
Stability ± 0.5°C
Heating electrical
OVEN CAROUSEL
Number of vials 6 seats
Shaking SOFT, oven stepping motor: 100 steps/sec.
FAST, oven stepping motor: 200 steps/sec.
PROGRAMMER
Microprocessor 8 bit
Control keys START,RESET,LOCK,SET,ACT,UP,DOWN
Operation leds WAIT,READY,AUTOSTART,RUN,LOCK
Valving timing keys and relevant leds : PROBE,PRESS,VENT,VALVE,TEST
DISPLAY
16 character alphanumeric display
PRESSURE CONTROLS
Pressure regulator with digital pressure readout
CONTROL INTERFACES
RS 232 serial communication
BCD output of sample number
CONTROL SIGNAL
Output remote start
AUTODIAGNOSTIC TEST
RAM
ROM
OVEN PROBE
VALVE PROBE
TUBE PROBE
CARRIER PRESSURE
AUXILIARY PRESSURE
UTILITIES
Power supply 220 V (± 10%), 50 Hz, 600 VA
115 V (± 10%), 60 Hz, 600 VA
Fuses 3.15 AT, 250 V (220 V)
6.30 AT, 250 V (115 V)
DIMENSIONS AND WEIGHT
Dimensions 42Wx47.4Hx61.7D cm
Weight 32 Kg