manufacturer :       Bioblock

model :                   Scientific 45008

annotation :           Dokumente engl .

BIOBLOCK HYBRIDIZATION OVEN

MODEL: 45008

Controls Overview

Power

The main power ON/OFF switch controls all power to the unit. It must be on before any systems are operational, including control circuitry. A light in the switch is activated when on.

Set Temperature

This control consists of the Up/ Down buttons and the digital display.

Heating When Lit

This light is on continuously when the unit is heating to set point and is blinking when controlling temperature at or near set point.

Rotate

This switch controls the rotisserie. This is a three position switch: ON/OFF/JOG . The pilot light, marked Rotating. When Lit, will be activated when this switch is in the ON or JOG position.

Rotational Speed Control

This controls rotisserie speed from 0 to 15 RPM.

Operation

WARNING; Temperatures in excess of 70°C can cause breakage of hybridization bottles. Do not run this chamber at temperatures above 70°C when bottles are in use. If the chamber temperature rises above 70°C and bottles are in the chamber, DO NOT OPEN THE OUTER DOOR. Turn the chamber power switch off and allow the chamber and bottles to cool below 70°C before opening the outer door.

Push power switch to the ON position.

Set Temperature Control

Enter desired set point temperature. To enter set point mode on the control, press either the Up or Down button one time. The digital display will start to blink, going from bright to dim. While blinking, the digital display is showing the set point. To change the set point, use the Up and Down buttons. lf the buttons are not pressed for five (5) seconds, the display will stop blinking and will read the temperature of the unit. NOTE. This control contains an automatic Overtemperature Safety which is set 1°C above set point.

Rotisserie Operations

The rotate switch is a three position switch which controls the rotisserie. The rotisserie is ON when the switch is in the up position; the rotisserie is OFF when the switch is in the center position. The lower position of the switch allows the user to incrementally rotate (JOG) the rotisserie.

Rotisserie Speed RPM Control

This control allows the user to change the speed of the rotisserie. Turning the knob clockwise allows the rotisserie to go faster. The range of this control is from 0 to 15 RPM.