JavaScript scheint in Ihrem Browser deaktiviert zu sein. Um unsere Website in bester Weise zu erfahren, aktivieren Sie Javascript in Ihrem Browser.
Labor- und Analysesysteme sind meist sehr anspruchsvolle Geräte mit ihren ganz eigenen Spezifikationen und Anforderungen. Daher stellt sich bei der Inbetriebnahme des Laborgerätes oft die Frage, wie das Laborgerät denn nun aufzubauen, einzustellen und in Betrieb zu nehmen ist.
Gerne übernehmen wir die fachmännische Installation Ihres Laborgerätes!Bitte kontaktieren Sie uns
Bei der Installation durch uns profitieren Sie gleich mehrfach:
24 Monate Gewährleistung
60 Tage Labexchange Vollgarantie
Funktions-Zertifikat
Rückgaberecht
Optionale Garantieverlängerung bis auf ein Jahr
Optionale Geräteinstallation für sofortige und sichere Gerätenutzung
Attraktive Miet- und Leasingangebote schonen Ihr Budget
Fragen zu diesem Gerät
Wenn Sie diesen Artikel gebraucht statt neu kaufen, sparen Sie so viel CO2 wie bei einer Fahrt von 410 km mit einem Benzinauto.
Der Gewährleistungszeitraum für unsere Geräte beträgt 24 Monate ab Anlieferungsdatum.
Alle Gebrauchtgeräte von Labexchange werden vor der Auslieferung einer technischen Überprüfung unterzogen und werden nur ausgeliefert, wenn sie einwandfrei funktionieren. Die Überprüfung und Funktionsfähigkeit wird durch einen Servicebericht unabhängiger Servicefirmen dokumentiert. Die Labexchange Vollgarantie beträgt 60 Tage ab Anlieferungsdatum. Auftretende Fehlfunktionen werden innerhalb der Garantiezeit kostenlos durch uns behoben. (Gültig für Länder innerhalb der EU und CH)
Die Überprüfung und die Funktionsfähigkeit unserer Geräte werden zusätzlich zum Servicebericht mit einem Funktions-Zertifikat dokumentiert.
Mit unseren gebrauchten Laborgeräten und Analysesystemen sind Sie auf der sicheren Seite!
Für noch mehr Sicherheit beim Kauf räumen wir Ihnen das Labexchange Rückgaberecht ein. Geben Sie Ihr Laborgerät oder Analysesystem ohne Angabe von Gründen einfach zurück.
Es gelten unsere spezifischen Geschäftsbedingungen:Labexchange Rückgaberecht(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/Rueckgaberecht_08_18_D.pdf)
Auf Wunsch prüfen wir die Möglichkeit einer Garantieverlängerung für Ihr Gerät. Falls möglich, beträgt die Garantiedauer 6 Monate bei einem Aufpreis von 10% auf den Listenpreis und 1 Jahr bei einem Aufpreis von 20%. (Gültig für DE, AT, CH, FR, NL, BE, LU, GB und IR)
Gehen Sie auf Nummer sicher! Unsere qualifizierten Techniker installieren das Gerät zu Ihrem Wunschtermin im Labor, damit Sie schnell und sicher mit ihrem neuen Laborgerät arbeiten können.
Die Geräteinstallation durch Labexchange bringt Ihnen weitere Vorteile. Sie erhalten hierdurch eine Garantieverlängerung auf 3 Monate und haben zudem ein Anrecht auf die Labexchange Rückkaufgarantie.
Sensible Laborgeräte und Analysesysteme sowie ein Großteil der verfügbaren Laborabzüge erhalten Sie bereits inklusive Installation. Wir bieten Ihnen gerne die Installation Ihres Laborgerätes an.
* Pflichtfelder
Die gebrauchten Laborgräte werden vor der Auslieferung von der Labexchange Service GmbH überprüft. Sie erhalten voll funktionsfähige Geräte.
Die angegebenen Versandzeiten sind die jeweils kürzesten für einen Artikel. Die tatsächlich Versandzeiten können im Einzelfall davon abweichen. Die endgültigen Versandzeiten werden in der Auftragsbestätigung angegeben.
Bei Bestellung/Anfrage von mehreren Artikeln bieten wir grundsätzlich Sammellieferung an. Die Versandzeit berechnet sich nach der Position mit der längsten Versandzeit. Auf ausdrücklichen Wunsch ist eine Teillieferung möglich.
Paketdienste, Speditionen, Selbstabholung, Lieferung durch Labexchange-Fuhrpark
Unsere Lieferbedingungen sind grundsätzlich zzgl. Versandkosten. Angegebene Versandkosten sind zu erwarten. Falls anfallende Versandkosten nicht angegeben sind, fragen Sie diese bitte gesondert an.
Bei Lieferungen außerhalb der EU werden zusätzlich Gebühren im Wert von 70,00 € für die Ausfuhr berechnet. Hinweis für Auslandssendungen: Ein Präferenznachweis/EUR1 wird von uns nicht ausgestellt. Bei Selbstabholung/EXW aus Drittländern und der EU werden 16% MWSt als Kaution einbehalten bis wir die Gelangensbestätigung/den Verbringungsnachweis des Käufers erhalten haben.
Wir akzeptieren keine Zahlung per Kreditkarte, Letter of Credit, PayPal etc. Der Rechnungsbetrag ist in jedem Fall ohne Abzug fällig. Die Ware bleibt bis zur vollständigen Bezahlung unser Eigentum. Skonto wird nicht gewährt.
Land
Mögliche Zahlungsarten
Bemerkung
DE, AT, CH
Rechnung, Vorkasse
Eine Zahlung per Rechnung ist nur für Firmenkunden möglich.
NL, BE, LU
Alle weiteren Länder
Vorkasse
Es gelten unsere Allgemeinen Verkaufs-, Lieferungs- und Zahlungsbedingungen. Diese finden Sie hier. Zwischenverkauf, sowie Irrtum und Preisänderungen sind vorbehalten.
Alle Artikel sind gebrauchte Artikel, es sei denn ein Artikel wird explizit als Neugerät aufgeführt.
Status
Zustand
Sofort verfügbar
gebraucht
Der Artikel wurde bereits überprüft und befindet sich in einem einwandfreien Zustand. Er kann direkt an Sie versendet werden.
Der Artikel befindet sich in unserem Lager. Unsere Techniker werden den Artikel vor der Auslieferung überprüfen. Sie erhalten voll funktionsfähige Artikel.
Anbieter
Der Artikel befindet sich noch beim Anbieter. Nach Ihrer Bestellung wird er von uns angekauft, überprüft und an Sie versendet. Ein Funktionszertifikat und ein Servicebericht sind bei der Lieferung enthalten.
Neugerät
neu
Es handelt sich um einen fabrikneuen Artikel. Es gelten die Garantiebestimmungen des Herstellers sowie die gesetzliche Gewährleistungsfrist.
Modell: G 1377A
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Four models of Agilent 1100 Series well-plate sampler are available :
G1367A Well-plate sampler
G1368A Thermostatted well-plate sampler
G1377A Micro well-plate sampler
GI378A Thermostatted micro well-plate sampler
The Agilent 1100 Series well-plate samplers and Agilent 1100 Series thermostatted well-plate samplers are designed for use with other modules of the Agilent 1100 Series LC system, with the HP 1050 Series, or with other LC Systems if adequate remote control Inputs and Outputs are available. The wellplate samplers are controlled from the Agilent 1100 Series control module or from the Agilent ChemStation for LC.
The special-designed thermostattable sample tray for this Instrument holds 2 well-plates (shallow - or deepwell) and additional 10 x 2.0 ml vials. The format of the well-plates can be up to 384 wells per plate (on a footprint of 128x86 mm). The well-plate sampler can also handle 100 x 2 ml vials using the current trays for the Agilent Gl313/29A autosampler. There are Sensors to detect the presence of the tray.
The well-plate sampler transport mechanism uses an X-Z-theta robot to optimize the positioning of the sampling arm on the well-plate. Once the sampling arm is positioned over the programmed sample position, the programmed sample volume is drawn by the metering device into the sampling needle. The sampling arm then moves to the injection position where the sample is flushed onto the column.
The well-plate sampler employs a vial/plate pusher mechanism to hold down the vial or the plate while the needle is drawn back from the sample vessel (a raust in the case a septum is used). This vial/plate pusher employs a Sensor to detect the presence of a plate. All axes of the transport mechanism
(x-,z-,theta-robot) are driven by Stepper-motors. Optical encoders ensure the correct Operation of the movement.
The standard metering device (for the G1367A/68A) provides injection volumes from 0.1-100 µl. A multi-draw kit extends the range up to 1500 µl. The micro metering device (for the G1377A/78A) provides injection volumes from 0.01 - 8µl with the standard loop capillary installed and from 0.01 - 40 µl with the extended loop capillary. The metering device is always flushed by the mobile phase after injection for minimum internal carry-over.
An additional needle flush station with a peristaltic pump is installed to wash the outside of the needle. This reduces the already low carry-over for very sensitive analysis. The bottle containing the mobile phase for the wash procedure will be located in the solvent bottle cabinet. Produced waste during this Operation is channeled safely away through a waste drain.
The six-port (only 5 ports are used) injection valve unit is driven by a high-Speed hybrid Stepper motor. During the sampling sequence, the valve unit bypasses the autosampler, and connects flow from the pump to the column directly. During injection and analysis, the valve unit directs the flow through the well-plate sampler which ensures that all of the sample is injected onto the column, and that the metering unit and needle are always free from sample residue before the next sampling sequence begins. The injection valves from the G1367A/68A and the G1377A/78A have a different stator head and a different rotor seal. The volume of each valve is different.
Control of the vial/plate temperature in the thermostatted well-plate sampler is achieved using an additional Agilent 1100 Series module; the ALS thermostat.
The ALS thermostat contains Peltier-controlled heat-exchangers. A fan draws air from the area above the sample vial tray of the well-plate sampler. It is then blown through the fins of the cooling/heating module. There it is cooled or heated according the temperature setting. The thermostatted air enters the well-plate sampler through a recess underneath the special designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how mang vials are in the tray. In cooling mode condensation is generated an the cooled side of the Peltier elements. This condensed water is safely guided into a waste bottle for condensed water.
Performance Specifications Agilent 1100 Series Micro Well Plate Sampler
GLP features Early maintenance feedback (EMF), electronic records of maintenance and
errors
Communications Controller-area network (CAN). RS232C, APG-remote standard, optional
fourexternal contactclosures and BCDvial numberoutput
Safety features Leak detection and safe leak handling, low voltages in maintenance areas,
error detection and display
Injection range 0.01 8 µl in 0.01 µl increments with the small loop capillary
0.01 40 µl in 0.01 µl increments with the extended loop capillary
Precision Typically < 0.5 % RSD of peak areas from 5 40 µl,
Typically < 1 % RSD from 1 5 µl
Typically <3 % RSD from 0.2-1 µl
Sample viscosity range 0.2 5 cp
Sample capacity 2 X well-plates (MTP) + 10 X 2 ml vials
100 x 2 ml in one tray
40 x 2 ml in half tray
lnjection cycle time Typically < 30 s using following standard conditions:
Default draw speed: 4 µl/min
Default eject speed: 10 µl/min
Injection volume: 0.1 µl
Carry-over Typically < 0.05 % using the following conditions:
Column:150 x0.5 mm Hypersil ODS, 3 pm
Mobile phase: Water/Acetonitrile = 85/15
Column Flovv rate: 13 µl/min
Injection volume:1 µl caffeine (=25ng caffeine),1 µl water to test carryover
Outside wash of needle before injection: 20 sec with water using flush port
Physical Specifications - sampler (G1367A / G1377A)
Type Specification Comments
Weight 15.5 kg (34.2 Ibs)
Dimensions 200 x 345 x 440 mm
(height x width x depth) (8 x 13.5 x 17 inches)
Line voltage 100 240 VAC, ±10 % Wide-ranging capability
Line frequency 50 or 60 Hz, -±5 %
Power consumption (apparent power) 300 VA Maximum
Power consumption (active power) 200 VV Maximum
Ambient operating temperature 4 to 55 °C (41 to 131 °F)
Ambient non-operating temperature -40 to 70 °C (-4 to 158 °F)
Humidity < 95 %, at 25 to 40 °C(77 to 104 °F) Non-condensing
Operating Altitude Up to 2000 m (6500 ft)
Non-operating altitude Up to 4600 m (14950 ft) For storing the
autosampler
Safety standards: IEC, CSA, UL Installation Category II, Pollution Degree 2
Optional with G1330B Thermostat
lntroduction to the Thermostatted Autosampler
The Agilent 1100 Series autosampler is designed for use with other modules of the Agilent 1100 Series LC System, with the HP 1050 Series, or with other LC Systems if adequate remote control Inputs and Outputs are available. The autosampler is controlled from the Agilent 1100 Series control module or from the Agilent ChemStation for LC Systems.
The specially-designed thermostattable Sample trays holds Bither 100 x 1.8 ml vials or two wellplates and 10 x 1.8 ml vials.
The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial trag of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the Sample tray ensuring effective temperature control, regardless of how many vials are in the tray.
In cooling mode condensation is generated an the cooled side of the Peltier elements. This condensed water is safely guided into the leak System.
Thermostat
Weight 20.7 kg (45.6 Ibs)
Dimensions 140 x 345 x 435 mm
(height X width X depth) (5.5 x 13.5 x 17 inches)
Line voltage 100 - 120 or 220 - 240 VAC, ± 10 % Automatic selection
Line frequency 50 or 60 Hz, ± 5%
Power consumption Autosampler: 300 VA Maximum
ALS Thermostat: 260 VA Maximum
Ambient operating temperature 4. 40°C (41 - 131°C) see an page 22
Ambient nun-operating temperature -40 70 °C (-4 - 158 °C)
Humiuity < 95 %, at 25 - 40°C (77 - 104 °C) Non-condensing;
Operating Attitude Up to 2000 m (6500 ft)
Safety standards: IEC, CSA, UL, EN Installation Category II, Pollution Degree 2
Ihr Labexchange-Team hilft gerne weiter:
Christian Schmid Labor und Analytik, Laboreinrichtung, Life Science
Hubert Sauter Spektroskopie, Chromatographie