Waters HPLC
Objektnummer | B00013104 |
---|---|
Seriennummer | 013104 |
Object Naam | Waters HPLC |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The system consists of differenet modules:
Waters 712 WISP
The 712 WISP combines precision and reliability to offer you an autosampler with exceptional value and versatility. As a standalone module, the 712 WISP provides more capabilities than other autoinjectors in its price range. Used in a Waters Powerline HPLC System (or a Waters data controlled system) it gives you added automation and enhanced documentation of system information.
The 712 allows you to program an entire carousel of samples with easy-to-use individual vial programming features:
LED display: Confirm injection parameters of set-up or during run. Injection volume: Program individual vials from 1 µl to 2000µl in 1 µl increments. Sample number: Go directly to specified sample for stat operation or to change any individual sample parameters.
Analysis time: Select sample analysis times from 1 minute to 9 hours, 59 minutes, in 1 minute increments.
Number of injections per vial: Program each sample for 1 to 9 injections. Equilibration delay: Program injection times from 1 minute to 9 hours, 59 minutes in 1 minute increments, for column reequilibration, automatic methods switching or integrator delay (useful during gradient elution chromatography).
System command: Program special routines such as standard/sample, syringe overdrawn, auto purge. Also communicates system or program errors to maximize productivity.
Specifications/Features
|
712 WISP |
Typical Precision |
< 1.0% RSD |
Linearity (1-100µl) |
> 0.99 |
Carryover |
< 0.1% |
Sample Waste (per inj.) |
None |
Minimum sample required (for 1µl inj.) |
7µls |
Random Access Programming |
No |
Injection Range |
1-2000µls |
Replicate Injections (per vial) |
1-9 |
Front Panel Control |
Yes |
Display Type |
Multisegment LED's |
Sample Carousel(s) |
4ml - 48 vial 1 ml - 96 vial |
External Event Contact |
|
Closures |
4 |
Non-Programmable |
4 |
Programmable |
0 |
Communications |
|
Output |
BCD |
Input/Output |
INTELINK, IEEE-488 |
Sample Compartment |
|
Temperature Control |
4°C-Ambient |
Advanced Sampling Routines |
|
Priority Samples |
No |
Auto Standards |
Yes |
Auto Addition |
No |
Auto Transfer |
No |
Advanced Sample Preparation |
|
Capabilities |
|
Filtration |
No |
Solid Phase Extraction |
No |
Serial Dilution |
No |
Mixing |
No |
Liquid/Liquid Extraction |
No |
Evaporation |
No |
Trace Enrichment |
No |
Power Requirement |
110-220V; 50-60Hz 35psi air |
Waters 510 HPLC Pump
Precise, reliable performance with Waters 510 HPLC Pump
The Waters 510 Pump is a high-precision HPLC pump that combines the most important aspects of performance-high precision, reliability, smooth solvent delivery, and proven performance. The 510 is the industry standard for microbore to semipreparative chromatography. The simple yet dependable design consists of dual reciprocating pistons driven by stepper-motor controlled, noncircular gears for smooth, precise delivery.
Dependable design ensures accuracy
The 510's standard flow range of 0.1 to 9.9 ml/min can be externally controlled down to 0.001 ml/min. and can operate in fully-automated isocratic mode, gradient mode, or flow programming mode. The 510's compressibility compensation circuitry automatically adjusts the motor's speed in response to changes in operating pressure, guaranteeing accurate flow delivery under all operating conditions and with all mobile phases.
The 6000 psig operating pressure lets you take advantage of the speed and efficiency of all microparticulate columns. An automatic high pressure shut off mechanism protects your columns. The mechanically activated outlet check valve and real design gives greater reliability under any operating conditions, even when using volatile solvents such as hexane und methylene chloride. Advanced seal material and mechanical design aid in precise solvent delivery und significantly extend the life of the pump. A Plunger Wash Kit is also available to extend the life of the seals when performing buffered mobile phase applications.
Drive: Positive gear drive with precision stepper-motor (12 steps/µl)
Flow Rate: 0.1 to 9.9 ml/min
with 680 Autornatic Gradient Controller 0.01 to 10.0 ml/min
with Micro Flow Control Module 0.001 to 9.9 ml/min
with 510 EF (Extended Flow) 0.22 to 22.5 ml/min
Flow Rate Precision: ±0.1 % of setting
Flow Rate Accuracy: ±1.0% of setting or 0.005 ml/min
Maximum Pressure Limit: 6000 psig (410 bars)
Pressure Meter Range: 0 to 6000 psig (0 to 410 bars)
Overpressure Limits: Continuously adjustable between 100 and 6000 psig (7 and 410 bars)
Piston Displacement Volume: 100 µI each piston (225 µI for extended flow version)
Waters CHM
Temperature Control Module Column Heater Module: Part number WATO38039
Waters TM programmable Ternperature Control System is a microprocessor controlled heating unit that maintains precise, consistent temperatures of up to four HPLC columns from ambient to 150°C (with control to a tenth of a degree). |
MANTENANCE PARTS AND SUPPLIES
Item Description Part Quantity/
Number Package
1 Inlet Tubing Assembly WAT038159 1
2 Fuses, 2.5 Amp, 115 V WAT072919 1
3 Fuses, 1.0 Amp, 115 V WAT005064 5
4 Rubber Gasket WAT038075 1
5 TCM Operator's Manual WAT038003 1
INSTRUMENT ACCESSORIES
6 Column Heater Insert, 4 mm x 10 cm WAT038120 1
7 Column Heater Insert, 4 mm x 15 cm WAT038121 1
8 Column Heater Insert, 4 mm x 25 cm WAT038122 1
9 Column Heater Insert, 4 mm x 30 cm WAT038123 1
10 Column Heater Insert, 8 mm x 25 cm WAT038124 1
11 Column Heater Insert, 8 mm x 30 cm WAT038125 1
12 Column Heater Insert, 7 mm x 30 cm WAT038126 1
13 Thin Wall C.H,I., 3.9 mm x 7.5 cm WAT019885 1
14 Thin Wall C.H.I., 3,9 mm x 15 cm WAT019886 1
15 Thin Wall C.H.I., 3.9 mm x 30 cm WAT019887 1
16 Cable, Extension, 10 ft WAT038131 1
Instrument repair parts are used by and are available only through Millipore Service. They are not listed in this catalog. The use of such parts usually requires the expertise of an authorized service and support representative to ensure maximum success.
If you fest you require parts not listed in this catalog, please contoct your local Millipore office for technicol assistance. The telephone number is listed in the back of this catalog.
Conductivity Detedtor 431
Data Module 746