VWR-Hitachi LaChrom
Objektnummer | B00020149 |
---|---|
Seriennummer | 020149 |
Object Naam | VWR-Hitachi LaChrom |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
model : LaChrom
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Merck Solvent Degasser L-7612
Conforms to EC Low Voltacre Standard 73123/EC
Technical Data
Voltage: 220 Volt/50 Hz
Tolerable voltalte range: +/- 10%
Power consumption: 50 watts
Material in contact with liquid: Teflon, PEEK and tefzel (fitting/ferrule)
Degassing channels: 4
Optimal fiow : 0.1- 3.0 ml/min. per channel
Dead volume per channel: 8 ml (+/- 10%)
Membrane surface area: approx. 250 cm2
Liquid connections: 1/4-28"
Weight: 3.8 kg
Dimensions: 160 (h) x 80 (w) x 320 (d) rnm
Model L-7400 UV Detector
Specifications
Optical system Double beam
Light source D 2 lamp
Measuring wavelength range 190 to 600 nm, 195 nm or higher recommended for measurement, 200 nm or higher recommended for
spectral acquisition
Filter (UV32) inserted in optical path for measurement at 361 nm or higher
Wavelength setting method Setting by keyboard or by communication (D-line)
Wavelength accuracy ±1 nm
Bandpass 10 nm
Digital output range -4 x 10 1 to 1.1 X 10 6 counts
1 AU, 2 AU, 4 AU output as 10 6 counts according to setting (Max.: Approx. 2.5 AU)
Time constant Selectable in 5 steps of
approx. 0.1, 0.5, 2.0, 4.0, 8.0 sec
Noise 0.8 X 10 -5 AU or less
(Conditions: wavelength
250 nm, air in cell, response approx. 2 sec)
Drift 2 X 10 -4 AU/hr or less
(Conditions: wavelength
250 nm, air in cell, constant temperature stable operating state)
Auto zero Zero adjusting range -0.3 to 2 AU
Offset 0 to 2 AU, settable in 0.001 steps
Spectrum memory
a ) Memorized contents Absorbance spectra
b) No. of spectra memorized Absorbance spectra ... . 7
Background spectrum... 1
Time program
No. of programs 9
Settable time Up to 600 minutes in 0.1 min steps
No. of steps memorized Total of 100 steps for 9 files
Program contents Measuring wavelengths, baseline processing
Specified time program is retained by battery backup when power is turned off.
Instrument condition setting Recorder range, offset value.
Specified conditions are retained by battery backup when power is turned off.
Communication function D-line
Flow cell Quartz cell (optical path length 10 mm)
Operating temperature range 4 to 35°C (non-condensing)
Operating humidity range 45 to 85%
Power supply 100 to 240 V,
50/60 Hz
Power consumption Approx. 150 VA
Dimensions 260(W) X 500(D) x 150(H) mm
Weight Approx. 14 kg
Others The following functions are available for analog input/ output.
a) Processor output 1 V full scale; 1 AU, 2 AU, 4 AU output as 1 V according to setting
(Max.: Approx. 2.5 AU)
b) Recorder output 10 mV full scale; full scale range 0.001 to 2.500 settable in 0.001 steps.
c) Lamp off input Lamp extinction
d) Marker input Marker of about 0.6 mV (6 divisions on recorder
chart ) is output onto recorder signal
e) Auto zero input Zero adjusting range -0.3 to 2 AU
Model L-7200 Autosampler
Specifications
Number of standard samples 80
The vial number setting range is from 1 to 200
Rack/sample vials:
Conditions can be set to accommodate a variety of sample vials and racks
Syringe capacity 0.5 mL (standard syringe)
Sample injection volume 0.5 µt to 400 µL (standard loop: 100 µl)
Syringe speed 5 speeds can be chosen by the analyst
Sample injection method:
Syringe measurement cut injection
Syringe measurement all volume injection
Full loop measurement injection
Pressure resistance 34 MPa (350 kgf/cm 2 )
Materials of wetted parts Stainless steel (SUS316), fluororesin , borosilicate glass, Vespel * (injection valve rotor seal), PEEK** (syringe valve rotor seal), EPDM; ethylene-propylene rubber*** (waste tube), pofypropylene (drain pan)
* Not usable for other than pH1 to pH13.
** Not usable for concentrated sulphuric acid, concentrated nitric acid, tetrahydrofuran
(THF), and methylene chloride
*** Not usable for benzene, hexane, toluene, xylene , chloroform, tetrahydrofuran,
hydrochloric acid, nitric acid, etc.
pH range pH1 to 13
Display LCD with back light (40 characters x 2 lines)
Control system : Sequential injection function for LC
Vial detecting function : Provided
Data storage
:
Number of injections
per sample Up to 99 times
Analysis time 999.9 rninutes
External communication
function D-Line communication
GLP function
Error detection Abnormality in operation of the
system is detectable.
Maintenance logbook After part replacement, the number of injections is
recorded . The count can be reset to zero after certain parts (e.g. injection port seal) have been replaced.
Ambient temperature 4 to 35°C
Ambient humidity 45 to 85%
Power requirement 100 - 240 V AC ± 10%, 50160 Hz
Power consumption Approx. 85 VA
Installation category Category II in 1E01010-1
annex J
Dimensions 260(W) x 500(D) x 235(H) mm (excluding protrusions)
Weight Approx. 19 kg
Model L-7100 Pump
Specifications
Pump Unit
Liquid Feed system:
Dual plunger type reciprocating pump, series connection
Maximum discharge pressure:
39.2 MPa (400 kgf/cm 2 )
Discharge rate range:
0.001to 9.999 mL /min
Pressure limit range:
0 to 41.2 MPa
Discharge volume of plunger no. 1:
100 µL/stroke
Flow rate setting accuracy (at constant room temperature of 20°C for distilled water):
- ±2 µL/min (0.01 to 0.1 mL /min, 1.0 to 39.2 MPa )
- ±2% (0.101 to 5 mL /min, 1.0 to 39.2 MPa )
- ±2% (5.001 to 9.999 mL /min, 1.0 to 2.0 MPa )
- +2% to -1p*% of discharge pressure
(5.001 to 9.999 mL /min, 2.1 to 39.2 MPa )
*p .. Pump pressure ( MPa )
Flow rate stability:
0.2% RSD or less (retention time at flow rate 1 mL /min, at constant room temperature of 20°C for distilled water)
Compensation of solvent compression ratio and elimination of pulsation:
High-speed feedback real-time control
Pressure display accuracy:
±5%
Constant pressure liquid feed:
2.0 to 39.2 MPa (20 to 400 kgf/cm² )
(Flow rate range: 0 to 5 mL /min)
Material of wetted parts:
SUS 316, ruby, sapphire, ceramic, PTFE carbon-impregnated PTFE
Display data:
Parameters
Pump monitor Flow rate, pressure
Gradient monitor Elapsed time, mixing ratio, flow rate, pressure, timer value, etc.
Pump control mode:
- Single-liquid delivery mode
- Low pressure gradient mode
- High pressure gradient mode
Contact input/output terminals:
Event timer: 4 channels
External communication:
D-line
(a) D-line communication mode (
(b) D-line contact mode (D-line OFF)
OUTPUT PUSY/READY
INPUT 1) GRADIENT START
2) EMERGENCCY STOP
Specification of pressure unit:
MPa , kgf/cm², bar, psi
Pressure zero adjustment:
Possible
Ambient temperature:
4 to 35°C (condensation unallowable)
Humidity:
45 to 85% RH
Power supply:
100 to 240 V AC ± 10%
Power frequency:
50/60 Hz
Power consumption:
About 100 VA
Dimensions:
260 (W) X 500 (D) x 150 (H) mm
Weight:
About 14 kg
Installation Category: II (by IEC1010-1 Annex J)
Low Pressure Gradient System
Number of mobile phase Up to 4
Mixing Valve opening/closing time control
Mixing ratio range 0 to 100% (in increments of 1%)
Flow rate setting range 0.001 to 9.999 mL /min (in increments of 0.001 mL /min)
Recommended flow rate range 0.1 to 9.999 mL /min (If the flow rate exceeds 2.0
mL /min , it is recommended to use the optional mixer.)
Gradient Blution profile Linear/multi-step
Number of programming steps 92 steps max. per program
100 steps max ./ 9 programs
Programming time Up to 600 min (in increments of 0.1 min)
Programming items - B/C/D mixing ratio
- Flow rate
- Event Signal output
- Pump stop, buzzer
Number of programs 9
High Pressure Gradient System
Number of mobile phase Up to 3
Mixing Double or triple pump flow rate control
Mixing ratio range 0.0 to 100.0% (in increments of 0.1%)
Flow rate setting range 0.001 to 9.999 mL /min (in increments of 0.001 mL /min)
Recommended flow rate range 0.1 to 9.999 mL /min
Gradient elution profile Linear/multi-step
Number of programming steps 92 steps max. per program
100 steps max. /9 programs
Programming time Up to 600 min (in increments of 0.1 min)
Programming items - B/C mixing ratio
- Flow rate
- Event Signal output
- Pump stop, buzzer
Number of programs : 9
D-7000 Interface Module
D-7000 IFM
Enclosure
The D-7000 IFM enclosure has the following physical characteristics:
Dimensions 260 min x 500 mm x 50 mm (W x L x H)
Weight 6 kg
Power Supply 25 VA
CPU Board
CPU 68340 (16 MHz)
ROM 256K
RAM 1.0 MB
I/0 RAM 256K
A/D Converter
Dynamic Range 21 bits
Resolution 0.25 microvolts per count
Minimum A/D Speed 12.5 msec .