JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
manufacturer : Varian
model : 8200 CX
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
8200 CX AutoSampler Basic Assembly
The 8200 CX AutoSampler is a low-loss low-volume autosampler that mounts an all Varian 3000 Series Gas Chromatographs equipped with the In-Board Data Handling (IBDH TM ) option.
The 8200 CX AutoSampler can be installed by you. Once you install the 8200 CX mounting plates over the GC injector nuts (either front or back mounting), and align the syringe, you can remove and remount the 8200 CX AutoSampler without the need to realign the syringe again.
The left-hand mount (storage module swings to the left) of the injector is standard for the Star 3400 CX, 3410, 3500, and the left injectors of the Star 3600 CX GC. An optional right-hand mount (storage module swings to the right) is available for right-hand injectors of the Star 3600 CX GC.
The 8200 CX AutoSampler assembly includes: Storage Module, Pneumatics Module, and Injection Tower .
8200 CX AutoSampler Features
Compatible with 1040, 1041, 1060, 1061, 1075 (front position Star 3400 CX only), 1077, and 1093/1094 (SPI) injectors
Controlled from the GC keyboard or the GC Star Workstation
Syringe washed with up to two solvents
Syringe needle depth into vial programmable.
Syringe plunger setting set easily (Home position alignment)
Connects to the host GC with one cable
48 vial capacity carrousel
Solvent flush sample injection technique
Injects Neat, Viscous, and Volatile samples
Accommodates 100, 120, 220, and 240V power
Pneumatics Module, Injection Tower , and Storage Module combined into a single compact unit
Pneumatics easily accessible
Five sampling modes
8200 CX AutoSampler Specifications
Performance
Peak area: <1.0% RSD typical in standard mode for all injector types except split/splitless
injectors (1075/1077) where typical RSD is <1.5%.
Carryover: <0.05% typical with default values.
<0.01% when wash cycle is lengthened by increased viscosity factor or with multiple solvent wash.
Physical
Height: 19.5" (49.5 cm)
Width: 6.0" (15.5 cm)
Depth (including
Storage Module): 15.75 (40 cm)
Weight: 24 Ibs (10.9 kg)
Sample Capacity: 48 samples contained in 2 mL screw-cap or 2 mL crimp-top vials, standard micro-vials with internally machined conical volume or National Scientific Target Microvial inserts. These types are mixable within the sample carrousel. Wash vials not required.
Syringe: Flow-through design to allow dynamic washing; standard 10 µL syringe with Teflon®-tipped plunger.
Sampling Modes: Standard, Volatile, Neat, and User Defined
Programmable
injection Speed: 0.2 to 10 µL/sec
residence time: 0 to 10 minutes
hot needle time: 0 to 1.0 minute
Sample size: Programmable from 0.1 to 5.0 µL with 10 µL syringe.
Sample waste: Less than 0.1 µL per injection in the Solvent Flush Mode.
Minimum sample 2 mL vials-300 µL
volume : Micro vials-10 µL
External wash
solvent : Choice of solvent A, solvent B, or both.
Sample coding: Racks 1-4; vials 1-12
Environmental
For Optimum performance of the 8200 CXAutoSampler, check that the operating environment meets the following specifications:
Temperature: Operating: 10°C to 40°C
Storage: -20°C to 65°C
Humidity: Operating: To 80% non-condensing
Power: 90 Vac to 264 Vac operating range with four selectable voltages:
100, 120, 220, 240 Vac (±10%) Frequency: 50/60 Hz
Power Consumption (Maximum): 55 VA
The 8200 CX AutoSampler mounts over the injectors on the top cover of the Varian Series 3000 Gas Chromatographs (with the exception of the 3300). The 8200 CX AutoSampler is operated through the keypad on the front panel of the GC.
The AutoSampler is not powered through the GC but through a "power entry module" located on the rear panel of the Pneumatics Module. The main power switch, fuse(s) and voltage selection components are also located on this rear panel. The AutoSampler can be operated at 100, 120, 220, and 240 Volts, 50/60 Hz, single phase, or split phase (phase/phase) power. For the procedure to select the appropriate voltage for the 8200 CX AutoSampler.
In order for the 8200 CX AutoSampler to operate with the 3000 Series GC, the GC must be equipped with the most recent version of the 8200 CX IBDH/CPU PC Board
The 8200 CX AutoSampler is constructed of three modules: Storage Module, lnjection Tower Module, and Pneumatics Module.
Storage Module
The Storage Module consists of: 48-vial carrousel, turntable, Position Sensor Board, vial sensors, and two synchronous motors that rotate the turntable and move it in and out of the sampling position. The Storage Module is hinged to the lnjection Tower and mounts left-hand ( standard), or right-hand (optional for the Star 3600 CX GC).
A power ON indicator (LED) is located an the front right side of the Storage Module. This LED lights when the power cord is properly connected and the power switch of the AutoSampler is turned ON.
Pneumatics Module
The Pneumatics Module houses: the solvent and air solenoid valves that control solvent and air to the solvent reservoirs and regulator; power transformer; main power switch, fuses, voltage selection module; and, the Controller PC Board. Gas (at 40-60 psig) enters the pressure regulator preset to 20 psi (outlet) at the factory. You should not need to further adjust the gas pressure. Gas is distributed to Tour valves (L1, L2, L3, L5) that control pressure and solvent flow from Reservoirs A and B. Solenoid valves in the pneumatics module are connected to J8 an the 8200 CX Controller PC Board.
Injection Tower Module
The Injection Tower Module houses the syringe carriage and syringe mounting hardware, syringe carriage drive stepper motor, waste cup, and syringe plunger stepping motor drive assembly. The Injection Module, complete with the hinged Storage Module, bolts to the Pneumatics Module.
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie