Tecator HT2
Objektnummer | B00014552 |
---|---|
Seriennummer | 014552 |
Object Naam | Tecator HT2 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Tecator
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
Extraction is used to isolate soluble matter such as Grude fat, additives, pesticides and critical minor constituents from complex materials. Extraction analysis is traditionally based an the Soxhlet principle because of its worldwide accepted accuracy and reproducibility. However, conventional Soxhlet analysis involves tedious and time consuming manual work and explosion risks.
The patented design of the Soxtec System HT2 makes it possible to perform extractions using a wide range of solvents, in a quicker, safer and more economical way compared to Soxhlet extractions. Thus, the technique normally reduces extraction times to less than 20% of Soxhlet times and recovers 60-70% of the solvent.
High safety is ensured by external heating.
The combination of the Soxtec extraction technique and the wide range of solvent use makes the Soxtec System HT2 a flexible and powerful tool in the analysis of soluble compounds from materials such as: food, feed, soil, fibres, chemical technical products and pharmaceuticals.
Samples to be analysed are weighed into thimbles and inserted into the Extraction Unit. After solvent addition to the extraction cups, the soluble material is extracted into the solvent in a two stage process followed by a solvent recovery cycle. Finally the extraction cups are dried and weighed.
The Service Unit supplies the Extraction Unit with hot oil to achieve solvent evaporation. The tubing connecting the Extraction and Service Units, is deigned to withstand the use of hot oil, and allows constant temeratures. The lenght of the tubing permits the units to be placed in separate rooms.
The Service Unit is also equipped with an air pump for evaporation of the last traces of solvent from the extraction cups.
Function
The Soxtec System HT2 comprises:
- 1045 Extraction Unit
- 1046 Service Unit
- Extraction Cups
- Tongs for extraction cups
- Thimbles
- Thimble Adapter
THE 1045 EXTRACTION UNIT.
If the Extraction Unit, solvent extraction is done in two steps. At first the sample is immersed in the boiling solvent to dissolve most of the soluble material. In the second step the sample is raised above the solvent surface to permit an efficient washing of the sample with solvent from the condensers.
After extraction the condenser valves are closed by turning the valve knobs a quarter turn. After some minutes most of the solvent is collected in the condenser. The last residue of solvent is evaporated when the air valves are opened.
THE 1046 SERVICE UNIT
The Service Unit supplies the Extraction Unit with hot oll or water from a built in tank. The heating medium is pumped from the Service Unit to the hot plates in the Extraction Unit.
In the Service Unit there is also a pump providing an air flow for solvent evaporation.
THE EXTRACTION CUPS.
The Extraction cups are made of aluminium. Never place them an a dirty surface during the analysis. This might alter the tare weight. Before use, check that the bottom of the cups are clean and undamaged, otherwise boiling might be delayed due to bad contact.
Alternatively glass cups Gould be used (part no 1000 2291).
THE THIMBLES.
The standard sizes of thimbles are 0 26x60 mm and 0 33x80 mm (the larger thimbles is normally used for sample sizes ~~5 g). Smaller thimbles are also available (0 22 mm, length 50 mm; part no 1522 0009).
TONGS FOR THE EXTRACTION CUPS.
For inserting and removing the extraction cups the tongs (Fig. C) are used.