Tecan SpectraFluor Plus
Objektnummer | B00018170 |
---|---|
Seriennummer | 018170 |
Object Naam | Tecan SpectraFluor Plus |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Manufacturer: Tecan
Model: Spectrafluor pl
The SPECTRAFLUOR PLUS is a fully automatic, computer controlled fluorometer for measuring samples in a microplate. The instrument fulfills the requirements for numerous fluorescence, absorbance and glow type luminescence applications in research and routine investigations.
The filters are arranged in filter slides; four excitation filters and four emission filters respectively. The instrument has no on-board software and is exclusively controlled via an external computer using WindowsTMformat.
1 = power LED
2 = emission filter
3 = excitation filter
4 = plate carrier
Instrument Features
General
The following types of measurement are provided with the SPECTRAFLUOR PLUS microplate reader.
Measurement Type Read Mode Microplates to be Used
Fluorescence Standard and time- 6 - 1536 wells
resolved, top and bottom
Absorbance Single and dual ≤ 384 wells
wavelength
Glow type luminescence 96 wells
The table below lists the technical specifications for the instrument.
Parameters Characteristics
Measurement Software controlled
Interface Serial interface: RS 232
Filter handling External filter exchange
4 excitation filters and 4 emission filters in separate filter slides.
Up to 8 excitation and emission filter slides can be defined when using software.
Plate definition Via scanning software
Temperature control From ambient +5°C up to 42°C
Plate shaking Orbital or linear shaking - both offer 3 speeds
Light source High energy Xenon flash lamp
Optics Quartz fibers and lenses
Detector Side window, low dark current photomultiplier tube
Power supply Auto-sensing:100-120V / 220-240V 50/60 Hz
Power consumption 200 VA
Main fuse T 2A / 250 (slow blow)
Physical
Outer dimensions Width: 380 mm
Depth: 415 mm
Height: 170 mm
Weight 18.8 kg
Environmental
Ambient temperature
Operation 15°C 30°C 59°F- 86°F
Non-operation -20°C -+60°C-4°F - +140°F
Relative humidity
Operation 90% non-condensing
Overvoltage category II
Pollution degree 2
Usage Commercial
Noise level < 70 dBA
Method of disposal Electronic waste (infectious waste)
Fluorescence
Parameters Characteristics
Sensitivity ≤ 1.5 pg fluorescein / well (200 µl / well) or ≤ 4 fmol / well
in a Greiner 96 well black plate using 100 flashes / well
Wavelength Range 230 - 700 nm
Standard Filters Wavelength Band Width1)
Excitation 1. 360nm 35nm
2. 430nm 35nm
3. 485nm 20nm
4. 590nm 20nm
Emission 1. 465nm 35nm
2. 535nm 25nm
3. 595nm 35nm
4. 635nm 35nm
Read Mode Top and bottom (bottom for transparent plates)
Integration Time2) 20 - 2000 µs
Lag Time2) 0 - 2000 µs
1) Band width for standard filters may have some tolerance ±10%
2) Needs to be adjusted for Time Resolved Measurements. Lag Time is typically ≥ 40µs
Gain setting Values Measurement range
Manual 1 -255 0 - 60,000 RFU
Optimal Automatic 0 - 60,000 RFU
Extended Dynamic Automatic 0 - 6,000,000 RFU
Range (using XFLUOR)
No. of Definition Characteristic Meas. Time for Flashes/ Well 96 Wells
1 - 3 Plate carrier does not stop max. speed ≤ 30 sec
at the measurement point
(on the fly)
4-255 Plate carrier stops at the max. precision Dependent on the meas. point flash parameter setting
Absorbance
The specifications only apply to 96 well plates.
Absorbance can not be measured in 1536 well plates.
The absorbance filters are not within the instrument's standard configuration.
Parameters Characteristics
Wavelength range 230 - 750 nm
Meas. range 0-3 OD
Resolution 0.0001 OD
Accuracy 0 - 2.0 OD ± 2.0 % and ± 0.010 OD 492 nm
Precision 0 - 2.0 OD ± 2.0 % and ± 0.005 OD 492 nm
Linearity 0 - 2.0 OD ± 2.0 % 492 nm
0-1.5 OD ± 2.0 % 260/340 nm
Standard filters 405 nm / 450 nm / 492 nm / 620 nm
(not included in standard delivery)
Glow Type Luminescence
The specifications only apply to 96 well plates.
Luminescence can only be measured in 96 well plates.
Parameters Characteristics
Sensitivity < 0.4 10-6DEA activity units/well of molecular biology grade alkaline phosphatase (20 µl/well) using CDP-Star (Tropix) chemiluminescent substrate mix with Emerald-II enhancer (100 µl/well) in a Greiner 96 well white plate. Use of the cover plate greatly reduces the cross-talk.
0.4 10-6DEA activity units/well correspond to 200 fg/well of alkaline phosphatase when using a lot of 2000 DEA activity units/mg protein.
Wavelength range 400 - 700 nm
Gain Optimal: preset value
Manual: 1 -255
Integration setting Integration time Measurement range
Manual 1 - 5000 ms 0 - 55,000 RLU
Maximum Dynamic automatic (1 - 1000 ms) 0 - 55,000,000 RLU
Range (using XFLUOR)