Tecan Mega
Objektnummer | B00014099 |
---|---|
Seriennummer | 014099 |
Object Naam | Tecan Mega |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Tecan
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Legend:
1. Tip Unit
2. Tubing suspender
3. Top cover
4. Safety guard
5. Tubing channel
6. Z-Drive case
7. Aspirating tubing
8. Location of add. valves
or option connectors
9. System liquid reservoir
10. Syringes
11. Work table
12. Rack locating pins
13. Reference point
14. On/Off switch
15. Green control lamp
16. Speed control for stirrers
17. Tips
18. Wash station
19. Arm
Legend:
1. Swing door of Z-drive casing
2. Tubing suspender
3. Tip Units
4. Arm
5. Safety guard
6. Reader beam shield
7. Barcode reader
8. Linear Rack Drive
9. Tool box
10. Mains power connector
11. AC Line Fuse
12. RS 232 interface connector
13. Drain outlet
INTRODUCTION
TECAN ASSAY PREPARATION SYSTEM MEGA
The TECAN MEGA is a fast, fully automated sample processor controlled by an external Personal Computer (PC). The instrument features two double diluters with independent syringes and four sampling tips an a single robotic arm.
Each tip is capable of performing aspirating, dispensing, or diluting operations at any position an the instrument's work table (see Figures 1-1a and 1-1b).
The robotic arm can move to any point of the work surface in X-direction (left-right). The four pipetting tips are mounted an a Y-slide, inside the arm, which allows free movement to any point in Y-direction (front-back). Finally, the four tips, independently of each-other, can be positioned to any height (Z-direction) within the workspace.
Two double diluters are used for the precise aspiration and dispensing of liquids in accurate volumes of 5 µl to 10ml.
The MEGA comes with the application software packalte MAP (MEGA Application Program) and a Tack set as ordered.
The MEGA's functionality may be extended by the optional Linear Rack Drive (MEGA ID) and the Fast Wash Module. The Linear Rack Drive allows sample identification by reading barcodes an the sample tubes. The Fast Wash Module minimizes the time required for the tip washing procedure.
Principles of Operation
The MEGA combines a system of microprocessor-controlled liquid handling components to one instrument. The system is controlled by software which resides an the hard dick of a personal computer (IBM PC model XT, AT or System/2). An operator implements the required liquid handling application method by the MAP software package.
Pipetting methods can be customized for test sample configuration, liquid handling parameters, and data management. Additional programs provided by TECAN permit routine diagnostic tests and assist the operator in troubleshooting component function.
The MEGA's hardware is based an a modular design concept in which each of the major functions is performed by a modular component. The principal liquid handling components of the Instrument are:
(1) Diluter/Dispenser
(2) X/Y/Z Movement Mechanism (Arm)
(3) Liquid Detector
(4) Wash Station
(5) Fast Wash Module (additional Option)
See figure 2-1 for a schematic diagram of the liquid handling system. The modular design of the MEGA maximizes the flexibility of the instrument and simplifies maintenance and service procedures.
Instrument Specifications
Dimensions in mm (width x depth x height)
Overall w 761
d 662
h 428
Total Workspace w 457
d 345
(Tip) Long Short
h 115 165
Machine Range in Steps
x 2000
Overall per Tip y 2380
X 2008
(Tip) Long Short
z 1100 1600
Smallest X 0.2286 mm
Adressable Move Y 0.1451 mm
Z 0.1016 mm
Liquid Detection
Minimum volume approx 300 µl, depending on ion concentration of liquid and proximity to metal ground plate.
Approximate weights in kg and lbs
Net weight kg 5
Lbs 21
Shipping weight kg 103
Lbs 228
Operating Conditions
- temperature 15 35°C (59 95 °F)
- relative humidity 30 85% non condensing at 30°C or below
Storage Conditions
- temperature 0 50°C (32 122 °F)
- relative humidity 5 95% at 40°C or below
- altitude up to 10,000 m (32,000 ft)
Power Reuqirements
100, 110, 120, 220, 230, 240 VAC,
+ 10 /- 15 % tolerance, 50-60 Hz 220 VA
Fuse Values:
- AC Line Fuses 220-240 V : 2 x (slow blow) T 1.6 A
100-120 V : 2 x (slow blow) T 3.15 A UL/CSA
Barcode Reader
- Manufacturer Matsushita Industrial
Equipment Co., LTD
- Automatically distinguishing
and reading CODABAR
CODE 39
EAN-8, EAN-13
UPC-A, UPC-E
ITF
NW-7HEX
JAN-8, JAN-13
- Reading specifications Reading width: 75 mm
Resolution.....: 0,19 mm
PCS value : ≥ 0,5
(white bar reflective > 85%)
- Environment Conditions ≤ 1500 lux
Computer Specifications
Computer Model
IBM PC Model XT, AT, or System/2 with 640 kByte memory. TOSHIBA models 1200, 1600, 3100, 3200, 5100 and 5200.
For optimum performance, use a computer with a 80286 or 80386 microprocessor.
The computer raust be approved by IEC 950 / EN 60950 or listed by UL (UL 1950, or UL 478) Use of computers from other manufacturers does not guarantee functionality of the MEGA.
Disk Storage
Hard Disk Drive plus one Floppy Disk Drive.
Display Monitor
Monochrome or Color Monitor. The following display adaptors are supported by the TECAN Software:
- Monochrome Display Adaptor (MDA)
- Hercules Graphics Controller (HGC)
- Color Graphics Adaptor (CGA)
- Enhanced Graphics Adaptor (EGA)
- Video Graphics Array (VGA)
Interface
Serial Asynchronous Interface Adaptor RS-232C / CCITT V.24.
Interface Cables (supplied with the MEGA)
25/25 pin RS-232C / CCITT V.24
female to female cable
25 pin male to 9 pin female cable adaptor.
Printer (optional)
Printer must have a Centronics Parallel Interface and preferably should support the IBM extended ASCII character set.
Disk Operating System
DOS version 3.X (IBM- or MS-DOS)
Expanded Memory (optional)
Must conform to the Lotus/INTEL/
Microsoft Expanded Memory Specifi -cations (EMS version 3.2 or higher)