Tecan Freedom 200/4/8
Objektnummer | B00015204 |
---|---|
Seriennummer | 015204 |
Object Naam | Tecan Freedom 200/4/8 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Tecan
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
The Genesis Freedom is designed for automating routine laboratory tasks. The instrument consists of a platform (frame, housing, main electronic boards and power supply) that is available in three different sizes (approximate instrument length of 100, 150 or 200 cm). The platform may be placed onto a cabinet and can be equipped with maximally three robotic arms (two for size 100) in several combinations. The following robotic arms are available:
Li quid Ha ndling Arm (LiHa) for liquid pipetting tasks
Ro botic Ma nipulator Arm Standard (RoMa Standard) for plate handling on the platform worktable
Ro botic Ma nipulator Arm Long (RoMa Long) with long Z-axis for plate handling on and underneath the worktable (e.g. for loading a centrifuge placed underneath the instrument)
P ick and P lace Arm (P&P) for tube handling
Optionally, Instruments like for example a centrifuge or microplate reader can be placed in the cabinet underneath the worktable.
Technical Data
Instrument Overall Dimensions
Weights
Freedom 100 Freedom 150 Freedom200
Platform 106 kg / 233 lbs 125 kg / 275 lbs 175 kg / 385 lbs
LiHa 8 kg / 18 lbs 8 kg 18 lbs 8 kg 18 lbs
RoMa Standard and Gripper 6 kg / 13 lbs 6 kg 13 lbs 6 kg 13 lbs
RoMa Long and Gripper 8 kg / 18 lbs 8 kg 18 lbs 8 kg 18 lbs
P&P and Gripper 6 kg / 13 lbs 6 kg 13 lbs 6 kg 13 lbs
PosID 2 Option 8 kg / 18 lbs 11 kg / 24 lbs 14 kg / 31 lbs
MPO or FWO 2 kg / 4.4 lbs 2 kg / 4.4 lbs 2 kg / 4.4 lbs
Packing 35 kg / 77 lbs 47 kg / 104 lbs 71 kg / 156 lbs
Worktable Dimensions
Freedom 100 Freedom 150 Freedom 200
Accessible X-range 745 mm 1120 mm 1720
(X-travel) (29.3") (44.V) (67.7")
Accessible Y-range 418 mm 418 mm 418 mm
(Y-travel) (16.5") (16.5") (16.5")
Grid positions an worktable 30 45 69
Worktable cutout for centrifuge : 200 x 260 mm
Worktable cutout for reader : 252 x 150 mm
The RoMa Long reaches maximally 350 mm underneath the worktable.
Supply Ratings
Freedom 100 Freedom 150 / 200
Line Voltage 100 - 240 V AC 100 - 240 V AC
Frequency 50 / 60 Hz 50 / 60 Hz
Power 800 VA 1200 VA
Equipment and Safety Class 1 1
Circuit breaker 10 A 15 A
Uninterruptible Power Supply, UPS
For an optimal Operation of Genesis Instruments and smooth running of the relevant application, TECAN recommends to connect an online UPS, so that the power supply runs via the UPS with a filter effect. A switched UPS type that switches over to batteries only after network breakdown is not recommended.
For further assistance contact your nearest TECAN representative.
Environmental Conditions
All Genesis Instruments are intended for indoor Operation and storage only. The table below aives an overview.
Operation Temperature |
15 - 32 °C / 59 - 90 °F |
Operation Humidity |
30-80% relative (non condensing) at 30 °C / 86 °F or below |
Pollution Degree |
2 |
Overvoltage Category |
II |
Computer Requirements
Refer to your Genesis Instrument Software Manual (Doc ID 390791) for details an minimal Computer requirements.
Software Requirements
It is strongly recommended to use the latest software versions. Please contact your nearest TECAN representative for more Information.
Genesis Instrument Software V4.4 or higher
Gemini V3.5 or higher
FACTS V4.81 or higher
Optional System Modules
According to your order configuration some of the following options might be installed. The system modules are briefly introduced below, additional optional equipment and accessories are introduced in Chapter 3 Structure and Function.
Liquid Handling Arm (LiHa)
The Genesis Freedom Instrument may be equipped with maximally one 4- or 8-Tip Liquid Handling Arm depending on the customer's order configuration.
The Liquid Handling Arm is used for pipetting actions in different volume Tanges, depending on the tip types used and the features of the liquid system (see Chapter 3 Structure and Function).
Robotic Manipulator Arm Standard (RoMa Standard)
The Genesis Freedom Instrument may be equipped with one or two Robotic Manipulator Arms.
The Robotic Manipulator Arm is used to transport objects of the format of microplates, such as reagent blocks, deep well plates, etc. to different positions on the worktable or for storage onto the shelf.
Robotic Manipulator Arm Long (RoMa Long)
The Genesis Freedom Instrument may be equipped with one or two Robotic Manipulator Arms with long Z-axis.
The Robotic Manipulator Arm with long Z-axis is used to transport objects of the format of microplates, such as reagent blocks, deep well plates, etc. to different positions on or underneath the worktable or for storage onto the shelf.
Pick and Place Arm (P&P)
The Genesis Freedom Instrument may be equipped with maximally one Pick and Place Arm.
The Pick and Place Arm is used to transport tubes to different positions on the worktable.
Positive Identification (PosID 2)
The Genesis Freedom Instrument may be equipped with a Positive Identification module.
The Positive Identification reads Barcodes on Carriers, Racks and Containers on both the primary (e.g. sample tube) as well as the secondary side (e.g. microplates).
Other Optional Modules
Depending an your applications and Order Configuration the Genesis Freedom may be equipped with several optional modules. The following list is a random extract of all possibilities:
Hettich ROTANTA 46 RSC (ROBOTIC) microplate centrifuge or another suitable centrifuge
Tecan ULTRA microplate reader or another suitable microplate reader
NPS Nano Pipetting System
Disposable Tip option
Fast Wash option, FWO
Monitored Pump option, MPO
Low Volume option
Lower DiTi Eject option
384well Microplate option
Worktables with different Gutouts for access underneath the worktable
Cabinets for placing Instruments underneath the worktable
Access Option
External Powerswitch