Spectra Physics Spectra 200
| Objektnummer | B00004507 |
|---|---|
| Seriennummer | 004507 |
| Object Naam | Spectra Physics Spectra 200 |
| Status | Stock unit |
Product groep: HPLC detectoren (UV/VIS)
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
|
Land |
Mogelijke betaalmethoden |
Opmerking |
|
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
|
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
|
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Spectra Physics
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Spectra 200 UV-Vis DETECTOR
Specifications:
Wavelength Range:
190-800 nm with standard Deuterium and Tungsten lamps.
Band Width:
6 nm
Wavelength Accuracy:
+ 1nm
Wavelength Precision:
+0.1nm
Optical Methodology:
Standard Deuterium lamp (190-365 nm) and Tungsten lamp (366-800 nm) light sources with concave hob graphic grating monochromator with double-beam optics, and provisions for purging the monochromator.
Range Selections:
0.0005 to 7.9995 AUFS, in 0.0005 AU increments on any of the recorder outputs.
Absorbance Ratio:
Displayed as ratio of absorbances (at the two selected wavelengths) per full-scabe range; plotted "as 10g of ratio of absorbances per full-scale range.
Recorder Outputs:
10 mV, 100 mV, or 1.0 V output in any combination on the four recorder outputs.
Integrator Output: .
5 V per AU (2 AU/V).
Remote Controls:
Rear panel input for Auto Zero and external RUN; RS-232-C serial Interface for computer control and/or data acquisition; DPDT relay closure for optional auto-scan valve control -and/or peak-detection driven fraction collector.
Noise : < + 1.0 x 10 -5 AU at 254 nm with 1.0 sec rise time.
< + 1.0 x 10 -5 AU at 546 nm with 1.0 sec rise time.
Drift:
<2 10-4 AU/hour after 1 hour warmup.
Zero Adjust:
Plus or minus any amount by auto zero or by manual entry.
Rise Time Filter:
Digital active filter with rise times selectable from 0.0 to 9.9 sec (divide by 2 to convert to an equivalent time constant).
Flowcells:
Pathlengths from 10 mm to 0.0 mm, cell volumes from 0 to 15 microliters, stainless steel, titanium, or Kel-Fee" contact materials, sapphire Windows. 1000 psi pressure rating for stainless steel cells, 500 psi pressure rating for Kel-F cells, 2,000 psi pressure rating for variable pathlength preparative cells; 7,000 psi pressure rating for high pressure microbore cell.
OVERVIEVV
The light sources are continuum lamps that jointly provide consistent intensity across the entire spectrum from 190 to 800 nm. Two baffles are used to minimize stray light. Wavelength selection is provided by a concave holographic grating actuated by a microprocessor-controlled stepper motor.
True double beam operation is provided by a fiberoptic beam splitter. A reference photodiode continuously monitors the light from one leg of the beam splitter. The other leg is imaged by a Jens through a sample cell onto the sample photodiode.
The photodiodes are connected to individual pre-amplifiers. The pre-amp output voltages are directly proportional to the light intensity at the photodiode active surfaces (Fig. 7.2). The output of the pre-amplifiers is sent to an analog-to-digital converter (A/D) .
The analog-to-digital (A/D) converter converts the photodiode preamplifier Outputs to provide a nineteen (19) bit digital word. Approximately 10 readings are taken per second. The digitized data are processed by the microcomputer where all filtering and ranging is carried out. The processed data are transferred to a digital-to analog (D/A) converter to provide a linear -2 V to +2 V fall scale output for each Integrator and a -1 to +1 V fall scale output for each recorder channel.
Sense lines from the Computer to the AUTO ZERO and external RUN connections provide flexibility for remote and/or automatic operation. The keyboard an the front panel allows direct Operator control over all Instrument functions.
An RS-232-C Interface allows remote control of all parameters used or-controlled by the computer. In addition, status information and either raw or processed data can be transmitted through the interface.
Light from either the Tungsten (W) or Deuterium (Dz) lamp is selected by a shutter, passed through a set of baffles, and dispersed by a concave holographic grating. After passing through a second set of baffles, the light is transmitted to a fiber optic beam Splitter creating reference and sample beams. The reference beam is directed to a photodiode, while the sample beam is focused by a lens, passed through a flowcell, and terminated upon a sample photodiode.
Detector Optical System:
