Spectra Physics J40-8S40
Objektnummer | B00016903 |
---|---|
Seriennummer | 016903 |
Object Naam | Spectra Physics J40-8S40 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
manufacturer : Spectra Physics
model : J40-8S40
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The Spectra-Physics Model J40-BL6-106Q system comprises the Model BL6- 106Q solid-state laser head and the Model J40 air-cooled power supply.
Figure 1-1: The Model J40-BL6-106Q system showing the Model BL6- 106Q laser head and the Model J40 air-cooled power supply.
The Vanadate-based laser head is optimized for extreme short pulse dura-tion and high peak power performance with excellent mode quality and sta-bility at high repetition rates.
Vanadate (Nd:YVO 4 ) is a popular solid-state laser host because of its high gain and because it can provide high-power laser emission at high pulse repetition rates. Vanadate, like all other solid-state active media, exhibits thermal lensing caused by the temperature gradient inside the crystalline material. This temperature gradient creates an optical index gradient that acts as a lens.
The effective focal length of this thermal lens is determined, in part, by the amount of heat generated in the crystal by the pump energy. The more pump energy applied to the crystal, the stronger the thermal lens and the shorter the effective focal length.
The Model BL6-106Q periodic resonator, a compact linear cavity, allows the crystal to be end-pumped to ensure stable, high-power, single spatial mode output and to alleviate any mode quality issues. The round pump beam from a FCbar diode laser module results in a radial temperature gradient with minimal aberrations. The resonator optics are also carefully designed to mode match this pump region.
The Model J40-BL6-106Q system delivers more than 5 W of Q-switched power in the near infrared at 1064 nm in a near diffraction-limited beam (M 2 < 1.2). The repetition rate is adjustable from 1 Hz to 150 kHz. The tables at the end of Chapter 3 contain full system specifications.
Some of the advantages of the Model J40-BL6-106Q laser are:
- Short Pulse width (~6 ns)
- High repetition rate
- Excellent pulse-to-pulse stability
- Useful power in a compact size
- Reliability, long lifetime
- Superior mode quality
- Hands-off operation
The Model J40-BL6-106Q Laser System
The Model J40-BL6-106Q system has two components:
Model BL6-106Q laser head
Model J40 power supply
The power supply, output power, laser head type, pulse width, wavelength, drive type and cooling type are indicated by the part number:
J40-BL6-1 06Q
J-Series Power Supply
40 Watt Diode Bar
BL-Series Laser Head
1064 nm Wavelength
6 ns Pulse Width
Q Switched
The Model BL6-106Q Laser Head
The Model BL6-106Q laser head was specifically designed for applications that require a highly efficient, Q-switched, round laser beam with a short pulse width and good mode in a cost effective package. It features a rugged design with a sealed laser head for simple, hands-off operation. Driving the system is a single, patented, industry leading, high-power FCbar diode laser module that provides infrared pump power to end-pump the Vanadate crystal in the laser head.
Specifications
Model J40-BL6-106Q Performance Specifications
General Characteristics
Wavelength 1064 nm
Power > 5.0 W
Energy per Pulse > 140 µJ
Repetition Rate 1 Hz to 150 kHz
Pulse Width < 8 ns at 35 kHz
Beam Characteristics
Mode TEM OO
m2 < 1.2
Polarization 100:1 vertical
Beam Diameter (at waist) 300 µm
Beam Divergence (full angle) 4.5 mrad
Beam Roundness (far field) > 90%
Stability
Beam Pointing
near field ±0.25 mm
far field ±50 µrad
Pulse pulse-to-pulse stability
energy 1% rms
power < 1.5% rms
Long term average power ±2% over 1 hour, non-cumulative
Warmup Time 20 min
Environmental Specifications
Operating Conditions
Temperature range 18°C to 35°C
Altitude 0 to 3,000 meters
Humidity 8-90%, non-condensing,
for temperatures up to 35°C
Non-Operating Conditions
Temperature range -20°C to 50°C
Altitude 0 to 12,000 meters
Hum
idity 8-95%, non-condensing
Model J40-BL6-106Q Electrical/Nlechanical
Specifications
Electrical Requirements 100-240 V~ (±10°/0), 10 A, 50/60 Hz
Power Consumption < 1000 W (500 W typical)
Cooling Air-cooled
Weight
Model BL6-106Q Laser Head 1.5 kg (3.3 lb)
Model J40 Power Supply 12 kg (26.4 lb)
Power Cable Length 3 m (9.8 ft)
Optical Fiber Length 5 m (16 ft)
Fuse Ratings for F1, F2 of the Model J40 Power Supply
Supply Voltage Rating Type
100-240 V~ 10 A T 10 A 250 V