Shimadzu TOC 5000
Objektnummer | B00008284 |
---|---|
Seriennummer | 008284 |
Object Naam | Shimadzu TOC 5000 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Shimadzu
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
The ASI-5000 is an optional accessory for the TOC-5000 which allows automated carbon analysis in multiple samples. Carefully refer to this manual when installing and using the ASI-5000 Autosampler for the first time. This manual describes in detail the ASI-5000, as well as functions and operations in the TOC-5000 which relate directly to use with the ASI-5000 as an integrated automated system. For details related to independent Operation of the TOC-5000, please refer to the TOC-5000 Instruction Manual.
The ASI-5000 is provided with or without the optional rinse pump. Functions and other descriptions pertaining to the rinse pump are also covered in this manual. These may be ignored for instruments which do not incorporate the rinse pump.
Specifications
Vials: For regular sensitivity tumtable
sample vial capacity: about 6ml
standard solution vial capacity: about 45ml
For high sensitivity turntable
sample and standard solution vial capacity : about 45ml
Turntable capacity: Regular sensitivity
78 sample vials
8 standard solution vials
High sensitivity
16 sample vials
8 standard solution vials
Sample injection volume: Based on TOC-5000 specifications:
50 - 2000µl (with 2500µl syringe)
4 - 200µl (with 250µl syringe)
Based on TOC-5050 specifications:
4 - 200µl (with 250µl syringe)
Sample pre-treatment: For NPOC measurement, acidification and sparging
Measurement cycle: About 3 minutes/injection
Ambient temperature: 5 ~ 35°C
Power source: AC100V ± 10V, 50/60Hz, about 1A
AC 220 ~ 240V
External dimensions: W 380mm x D 365 x H 400 with arm up (excluding arm: 245mm)
Weight: About 17 kg
Measuring object TC, IC, TOC (TC-IC), NPOC*
Method Combustion/non-dispersive infrared gas analysis method
Combustion temperature 680°C
Range 4 ppb to 4,000 ppm (4 ppb to 5,000 ppm for IC)
Analysis time Normally 2 to 3 minutes for TC or IC (At the maximum, 4.5 minutes for TC and 3.5 minutes for IC)
Repcatability Less than 2,000 ppm (Less than 2,500 ppm for IC): Standard deviation is within 1% of the full-scale range.
2,000 to 4,000 ppm (2,500 to 5,000 ppm for IC): Standard deviation is within 2% of the full-scale range.
Sample introduction Introduction with automatic injector method
Sample injection volume Variable between 50 and 2,000 µl (with 2,500 µl microliter syringe)
Variable between 4 and 250 µl (with 250 µl microliter syringe)
Pretreatment method for IC With automatic sparging
Carrier gas High purity air (filled in a cylinder)
Pressure : Approx. 6 kgf/cm 2 (Max. 7 kgf/cm 2 )
Flow rate: 150 ml/min. (300 ml/min. including sparging gas)
CPU function
Signal processing Linearization, baseline correction, peak detection/ area calculation
Data processing Concentration calculation by one to four-point calibration curve methods, automatic selection of optimum calibration curve from three calibration curves, filing of up to 18 calibration curves, automatic deletion of abnormal values and automatic additional measurement and calculation thereof, SD/CV calculation, and repeated measurement with automatic change in the range and sample injection volume
Control Sample injector movements, TC furnace temperature, and on/off of carrier gas and sparge gas
Others Automatic selection of optimum measuring condition, maintenance/check functions, abnormality detection, and timer reservation for re-start
Display LCD (white liquid crystal with backlight)
640x 400 dots, 88 characters x 22 lines
Printer 240 dots for graphic, 40 characters/line, Chart width 110 mm, Thermosensitive type
Ambient temperature 5 ~ 35°C
Power requirements AC 100, 110, 115, 120, 127, 220, 230 or 240 V as ordered, ±10%, 5 A (Ordinary power consumption: About 300 VA),
50- 60Hz
Outside dimensions About 480W x 520D x480H (mm) (Excluding protrusions)
Weight About 46 kg