JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
Modell: CR 4A
Kommentar: Dokumente für IDNR. 12275
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Measuring System: Deflection type
Range of refractive index: 1 to 1.75
Measuring range: 0.25 X 10 -4 to 512 X 10 -6 RIU FS, selectable in 12 steps
Noise level: 2.5 X 10 -9 RIU short term noise for water-sealed and SLOW response conditions; short term noise as defined by ASTM
Linearity: 8 X 10 -4 RIU or higher
Cell volume: 10µl
Material in contact with liquid: SUS316, quartz, Teflon
Response: 3 step selection: FAST, STD and SLOW
Controlled temperature of cell: 35°C (Thermal fuse 70°C)
Zero adjustment: Optical zero adjustment
Automatic zero adjustment
Fine zero adjustment (manual)
Auto zero adjustment range: Maximum of ±4 X 10 -4 RIU
Auto zero adjustment accuracy: Maximum of ±3 X 10 -8 RIU
Recorder: 1mV, 10mV full scale
Integrator terminal output: 0.4V/1 X 10 -4 RIU, 0.1V/1 X 10 -4 RIU
Weight: 13kg
Size: 26(W) X 16(H) X 40(D) cm
Optimum operating temperature range: 10 to 40°C (when temperature is not controlled) Power requirements: RID-6A is classified as follows according to the supply voltage:
P/N 228-16510-91 100V±10V 1A 50, 60Hz
228-16510-92 115V±10V 1A 50, 60Hz
228-16510-93 220V±20V 0.5A 50, 60Hz
228-16510-94 240V±20V 0.5A 50, 60Hz
228-16510-95 230V±20V 0.5A 50, 60Hz
DGU-3A
The DGU-3A online degasser continuously removes gases dissolved in liquid through a special plastic membrane.
When the degasser is connected to the HPLC pump, the degasser continuously removes gases dissolved in the mobile phase without changing its composition. Consequently, the degasser improves stability and repeatability in HPLC analysis because it prevents generation of bubbles due to dissolved gases, poor delivering of the pump due to bubbles, noise an the baseline of the detector, and fluctuation of the detector baseline due to the variation of dissolved gas concentration.
The DGU-3A has three independent flow paths and the DGU-4A has two independent flow paths. The degassing characteristic per flow path and other functions are common to both the DGU-3A and DGU- 4A, and the only difference between them is the number of flow paths.
The operating principle of the degasser is illustrated below.
The mobile phase passes through the special plastic membrane mounted in the vacuum chamber of the degasser. Gases dissolved in the liquid selectively pass through the membrane into the space in the vessel because of smaller gas molecular sizes, and higher mobility than the liquid, and the close affinity of gases to the membrane. In the above process, gases are removed from the liquid to the space in the vacuum chamber and are then exhausted out of the system.
Specifications:
Degassing characteristics The concentration of residual dissolved oxygen at the outlet of the degasser is 1.5ppm max. per flow path when air-saturated ion-exchanged water at an ambient temperature of 25°C is passed through the degasser at a flow rate of 3ml/min max.
Maximum flow rate 10ml/min (water)
Internal volume About 15ml per flow path
Operating pressure 2kg/cm 2 max. (Use is limited to the suction side, i.e., inlet, of the pump. Feeding of liquid to the degasser under pressure is not allowed.)
Connecting tubes Teflon tubes of 3mm OD and 2mm ID
Wetted materials Special plastic resistant to all solvents (degassing membrane), Kel-F (connection joints), Teflon (connection tubes)
Other
Self-cleaning When the vacuum pump is started or stopped, the solenoid valve is switched over to draw in ambient air to prolong the service life of the vacuum pump.
Safety feature A device is provided to stop the vacuum pump automatically if the vacuum pump is over-heated.
(Remains in standby to allow natured cooling.)
Dimensions Width 260mm, height 140mm, depth 400mm
(Not including projecting parts)
Weight 13kg
Ambient temperature and humidity: 10 to 40°C and 40 to 85%, respectively
Storage temperature 0 to 60°C (with the flow paths dried)
Power supply: DGU-3A is available in the following modifications according to the power supply voltage.
P/N 228-24200-91 AC100V±10% 100VA 50/60Hz
P/N 228-24200-92 AC115V±10% 100VA 50/60Hz
P/N 228-24200-93 AC220V±10% 100VA 50/60Hz
P/N 228-24200-94 AC240V±10% 100VA 50/60Hz
P/N 228-24200-95 AC230V±10% 100VA 50/60Hz
Detector SPD-6AV
Wavelength range 195 to 700nm
Wavelength accuracy ±2nm
Wavelength reproducibility ±0.5nm
Spectral bandwidth 8nm
Light source Deuterium (D 2 ) lamp (195370nm)
Tungsten halogen (WI) lamp (370700nm)
Diffraction Grating Blazed holographic type with 1200 grooves/mm
Cell volume (STD) 8µl (lmmØ X 10mm)
Cell pressure tolerance 30kg/cm 2
Materials in contact with liquid SUS 316, quartz, Teflon
Base line noise 3 X 10 -5 AU Max. at 250nm, 500nm
(using air in the cell, as a response STD)
Base line drift 1 X 10 -3 AU/hour Max. 250nm, 500nm
(using air in the sample cell)
Measurement range 0.001, 0.002, 0.005, 0.01, 0.02, 0.04, 0.08, 0.16, 0.32, 0.64, 1.28, 2.56, AUFS - intervals of selectable in 12-steps
Response 3-step selection: FAST, STD and SLOW
Corresponding to 0.05, 0.5 and 1.5 sec time constants. However, an internal switch can change the time constants to 0.1, 1.0 or 3 sec.
Zero adjustment Auto zero by pushbutton switch
Zero adjustment range Maximum of 1.4AU
Zero adjustment accuracy Maximum of ± 1 X 10 -4 AU
Recorder terminal outputs 1mV, 10mV full scale
Integrator terminal output 0.4V/AU, 0.8V/AU
Weight 14kg
Size 26(W) X 16(H) X 40(D) cm
Optimum operating temperature range 10° to 40°C
Power requirements (SPD-6AV is classified as follows according to supply voltage.)
P/N 228-15001-91 100V ± 10V 1.3A 50, 60Hz
P/N 228-15001-92 115V ± 10V 1.3A 50, 60Hz
P/N 228-15001-93 220V ± 20V 0.7A 50, 60Hz
P/N 228-15001-94 240V ± 20V 0.7A 50, 60Hz
P/N 228-15001-95 230V ± 20V 0.7A 50, 60Hz
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie