Shimadzu 14 A
Objektnummer | B00016971 |
---|---|
Seriennummer | 016971 |
Object Naam | Shimadzu 14 A |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
manufacturer : Shimadzu
model : 14A GCFI
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Installation Environment
Although the unit operates in the range of ambient temperatures of 5°C ~ 40°C and relative humidity of 5% ~ 90%, use it within the range of 10°C ~ 30°C ambient and 50 ~ 60% relative humidity for longer service life and the optimum specifications. (Operating temperature range: 5°C ~ 40°C, specified temperature range: 10°C ~ 30°C)
Installation place
The following installation area is required. Install the unit at place which is protected from vibration and direct sunlight. As high-temperature (400°C) air is exhausted from the rear of the unit, do not place combustible things around the unit.
Dimensions of installation place
External dimensions of the unit
H: Height 520mm
W: Width 400mm
D: Depth 475mm
E: Height of flow controller 70mm
A : Required space behind the unit 300mm or more
B: With option unit 76mm
C: For C-R4A
Chromatopac
420mm
Weight of GC-14A main body: Approx. 40kg
Power
115/220V AC (50Hz/60Hz) and 2.0 kVA max, capacity are necessary for the power source of the unit (with no satellite oven installed).
Column oven 1.3kVA
INJ block 150VA
DET block- 300VA
TCD block 200VA
Total consumed power is calculated by totalling the power consumed by INJ, DET, column oven, and AUX blocks.
Range of source voltage ± 10%
Specified range of source voltage ± 5%
Power cable
As the maximum capacity of power exceeds 15A, power cannot be supplied from a general outlet. Accordingly, supply power from a specially-wired terminal with large capacity. Exercise caution in wiring in accordance with the functions and color of the power cable, as described below.
Specifications
Column oven
Dimensions of column compartment: 230 (W) X 140 (D) X 360 (H) mm
Length of columns to be Stainless steel column 10m X 2
accommodated : Glass column 3m X 2
Capillary column 100m X 1
Range of temperature setting: Temperature; -80~+399 1°C step
Rate of temperature rise; 0~40°C/min 0.1°C step Constant temperature hold time; 0~655 min 0.1°C step Program stages 5 stages max.
Range of temperature control (with power voltage of 100V)
Range of linear temperature 30°C/min 150°C or less
increase : 20°C/min 250°C or less
10°C/min 330°C or less
5°C/min 399°C or less
Lower-limit temperature: When INJ and DET temperature is 300°C,
room temperature + 15°C
When INJ and DET temperature is 150°C,
room temperature + 10°C
Additional cryogenic equipment is required for controlling at lower temperatures than those above.
Cooling speed: Approx. 9 min to reduce from 399°C to 100°C with
room temperature of 25°C.
Approx. 14 min for reducing from 399°C to 50°C with room
temperature of 25°C
Detector oven
Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)
Control accuracy: ±0.02°C (Average)
TCD oven
Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)
Control accuracy: ±0.01°C
Sample injection port unit
Range of temperature setting: Room temperature ~ 399°C
Control accuracy: ±0.1°C (Average)
Sample injection port unit (Either one of the following units is provided)
Single injection port unit: For packed glass column, combination type of glass
insert and on-column injection, 1 flow line
Dual injection port unit: For packed glass column, combination of glass insert
and on-column injection, 2 flow lines
Injection port unit for Exclusive injection port for capillary analysis
for capillary columns:
Overheat protection circuit 3 circuits
- 450°C-fixed independent protection circuit.
- Protection circuit for which the upper- lirnit temperature can be set via key operation.
- Overheat protection circuit by CPU abnormality detection
Combination of Detectors
- Four detectors at maximum from among TCD, FID, ECD, FPD, and FTD can be simul-taneously installed to the detector oven of the GC main body. Two TCD detectors cannot be set simultaneously.
- Only two types of detector controllers (except FTD) can be installed simultaneously to the control section of the GC. Another unit should be applied for installing three or more detector controllers, or FTD.