Schott Titronic 110 Plus
Objektnummer | B00017655 |
---|---|
Seriennummer | 017655 |
Object Naam | Schott Titronic 110 Plus |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
~/manufacturer: Schott
model: Titronic 110 plus
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Using the versatile TITRONIC® 110 plus Piston Burette, virtually all titration and dosage tasks occurring in a laboratory can be completed. The substances or mixtures of substances to be dosed must be liquid.
The examples of possible uses for the piston burette include:
· Dosage and titration within the TitriSoft Computer Titration System
· Titrating in combination with automatic titration units from SCHOTT-GERÄTE such as the TitroLine alpha plus
· Titrating using the TR 160 Manual Titration Controller
· Dosing with a pre-selected volume, time, or speed
The following may be used:
· All common titration solutions, with the solutions specified in the "Küster-Thiel" calculation tables (published by Walter de Gruyter) being taken as standard.
· Water and all non-aggressive, inorganic and organic fluids may be used as solvents. When handling inflammable substances the explosion protection directives of the Professional Association of the Chemical Industry are to be observed,
· With Iiquids with a higher viscosity 5 mm2ls), a low boiiing point, or a tendency to exhalation, the filling speed can be adapted.
· Liquids with a viscosity above 50 mrrüs cannot be dosed.
The two RC-232-C-interfaces allow the chained arrangement of TITRONIC® 110 plus Piston Burettes among each other as well as the connection of other devices from SCHOTT-GERÄTE which suitable for chaining, e.g. the TitroLine alpha plus Titrator and the TitriSoft software in combination with a PC. A standardised connector enables a standard PC keyboard (PS2) (fig. 15, item 6) to be connected for a convenient parameterisation of various functions.
A stand can be connected directly to the TITRONIC® 110 plus Piston Burette for the attachment of a stirrer or an electrode clannp (Fig. 2).
Interchangeable Units are available for volumes of 50 ml, 20 ml, 10 ml, 5 ml and 1 ml (Fig, 5). The centrepiece of the interchangeable units is formed by the high-precision borosilicate Blass cylinder (Fig. 5) the internal diameter of which is made with a manufacturing tolerance of ±0.003 mm. This diameter tolerance and the low-wear high-precision spindle inside the piston burette reduce the maximum fault deviation caused by the piston burette to ± 0.1% for the TITRONIC® 110 plus Piston Burette e.g. with the interchangeable units of the TA 10, TA 20, and TA 50 types.
Technical properties of the TITRONe 110 plus Piston Burette
Multi-functional display: 4-digit display, approx. 25 x 65 mm, 4-digit volume display with
Floating point, height approx. 18 mm,
Piston drive: Pulse-controlied step motor, maximum frequency = 330 Hz,
Interchangeable Units: 1 ml, 5 ml, 10 ml, 20 ml, and 50 ml, UV protection filter,
erasable front labet;
Resolution: 10,000 pulses per 100 % of volume,
smallest increment 0.1 pl with 1 ml interchangeable unit
Accuracy: 0.2 % to 0.1 % relative to 100 % of volume,
depending on interchangeable units
Reproducibility: 0.1 % to 0.05 %, depending on interchangeable unit
Display accuracy: 0.000...9.999 ml, 10.00...99.99 ml, 100.0...999.9 ml, 1000...9999 ml
Filling Speed: 100 % of volume in 20 s to 999 seconds, freely selectable
Discharge Speeds: 0.01 ml/h to 100 ml/min, depending on interchangeable unit
Valve switch-over: automatic
Inputs and outputs: 2 RS-232-C serial Interfaces, 9-channel sub-miniature D jacks,
keyboard port: 5-channel mini DIN sacket PS2
I/O gort: 15-channel sub-miniature D jack, e.g. for connecting a TR 160
Power supply corresponds to Protective Class I according to DIN 57 411 / VDE
0411, Part 1
Mains connection: 230 V~/ +6 %, 50...60 Hz or
115 V~/ ± 10%, 50...60 Hz, internal conversion
Mains fuse: Fine wire fuse 5 x 20 mm: with 230 V ~, 0.25 A, slow-blow type
with 115 V ~, 0.5 A, slow-blow type
Power consumption: 35 VA
CE-Sign:C E: EMC - Compatibility according to the directive 89/336/EEC of the Council;
Interference emission according to the EN 61 326 standard, Part 1 Jamming resistance according to the EN 61 326 standard, Part 2 Low-voltage directive according to the Directive 73/23/EEC pf the Council, as amended by the Directive 93/68/EEC of the Council
Testing Basis: EN 61 010, Part 1
Country of origin:
Made in
Dimensions: 150 x 360 x 290 (W x H x D) with interchangeable unit
Weight: approx. 5.1 kg with interchangeable unit
approx. 4.3 kg without interchangeable unit
Interchangeable units
Compatibility: The units are interchangeable with those of the T 100, T 110/220
Piston
Burettes and the titrator of the TitroLine alpha plus type
Coding of the cylinder size: Automatically, the mounting for the glass cylinder bears an
unmistakable code
Valve: Volume-independent cone valve made of fluorocarbon polymers
(PTFE)
Cylinder: Made of DURAN°
Hoses: FEP tose set with UV-protection
Bracket for storage bottle: To fit glass bottle to DIN 12 036 and DIN 12 039,
rectangular glass or plastic bottle
Fastening for
interchangeable unit: With automatic checking feature
Materials: Borosilicate glass, fluorocarbon polymers, PPS, high-grade steel
polypropylene, acrylic glass
Dimensions: 145 x 260 x 270 mm (W x H x 0) without reagents bottle
Weight: Approx. 0.80 kg for TA 20 interchangeable unit without reagents
bottle
Dosing accuracy: According to DIN EN ISO 8655, Part 3
Correctness: 0.1 - 0.3%
Precision: 0.05 - 0.1%
(depending an the interchangeable unit being used)
Dosing accuracy of the TITRONIC® 110 plus Piston Burette when used with TA and TA plus Interchangeable Units:
Inter- Volumen Tolerances of the Ø Correctness re- Precision
changeable unit of the glass cylindersferred to 100 % of
type no. [ml] [mm] volume [%]
[%]
TA 01 1,00 ± 0,003 ± 0,3 0,10
TA 05 plus 5,00 ± 0,003 ± 0,15 0,07
TA 10 plus 10,00 ± 0,003 ± 0,1 0,05
TA 20 plus 20,00 ± 0,003 ± 0,1 0,05
TA 50 plus 50,00 ± 0,003 ± 0,1 0,05