Planer Kryo 10 II
Objektnummer | B00012637 |
---|---|
Seriennummer | 012637 |
Object Naam | Planer Kryo 10 II |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The following descripton is correspondig to Modell Kryo 10 Series II
The Kryo 560 - 16 incorporates all of the critical features expected from a high dass biological freezer. The system is specifically designed with full system safety protection. The -180 °C end temperature ensures sample integrity during transfer to storage whilst the flexibility of the system, including protocol stage transition based an sample or chamber temperature or time, is ideal for the more demanding protocols associated with the most advanced cryopreservation techniques.
The high capacity LNP4 active nitrogen pump offers both faster cooling rates and, when combined with a LAB 30 dewar, a largo reservoir offering the reassurance of an extended hold time at the protocol end temperature. The system sample capacity is sufficient for the busiest laboratory and the state of the art compact design will enhance the most modern facility. The top opening chamber, combined with a unique forced laminar ilow pattern of the coolant and cryogenic insulation, ensures even and accurate temperature control in all phases of the protocol and prevents the lid from freezing shut at cryogenic temperatures.
The MRV controller system has been created to offer multiple protocols whilst remaining simple to programme and operate. Both during and after a run it offers the widest range of displayed information, alphanumericaily and graphically via the easy view display and as a print out an the integral full view printer. Validation is a high priority and the MRV offers password controlled access an multiple user levels, time and date stamping, programme preview/verification before running and data storage for the last 10 runs for subsequent printing.
User calibration with associated hard copy is featured and PC connection compatible with our comprehensive Delta T TM software application is standard. These help protect against power failure and PC failure when running wich software. Processor or system problems are controlled and the system restarts to protect samples. For example all control and data systems are separated, the controller can be removed from the operating freezer wich no loss of programme integrity; data storage and processing are run an completely isolated electronic systems.
The Planer Kryo 560 - 16 fully featured Tissue Bank freezer for cryopreservation of Bone Marrow, Stern Cells, Skin, Cord Blood and other critical high volume samples
q Designed for freezing of samples in bags, ampoules and straws
q Controller displays demand, sample and chamber temperatures, programme stage and current temperature graphic
q Menu driven controller, simple to programme and operate
q Protocol stage trigger an sample or chamber temperature or time
q Unique forced laminar flow system ensures efficient, even cooling
q Standard operating features:
Start above ambient
Controlled heating
Dato Printing (integral printer)
Comms port for PC connection
Fast cooling rates
Multiple safety features
SPECIFICATION OVERVIEW
· Chamber volune: 16 Iitres
· Capacity: 11 x 250/500 rni bags, horizontally or vertically in chamber
· Ampoule capacity: 726 x 2 ml in basktets
· Straw capacity: 608 2 ml on canes (horizontal)
· Lower temperature limit: -180 °C
· Cooling rates: -0.01 to -50 °C/min
· Controlled heating rates: 0.01 to 10 °C/min
· System controller: MRV
SYSTEM REQUIREMENTS
5 psi or 22 psi Liquid Nitrogen Supply
TECHNICAL SPECIFICATION - Kryo 560 - 16 |
|
System Specification |
|
Range |
+30 °C to -180 °C |
Heating rate |
0.01 °C/min to 10 °C/min |
Cooling rate |
-0.01 °C/min to -50 °C/min |
Controller accuracy |
±(O 3 + 0 005 x TM) °C (where TM is the magnitute of the temperature) |
Storage temperature |
-10 °C to +50 °C |
Storage humidty |
5 % to 95 % relative humidity non-condensing |
Operating temperature |
5 °C to 40 °C |
Operating humidity |
5 % to 90 % relative humidity non-condensing |
Controller Specification |
|
Dimenstons |
80 mm high x 220 mm wide x 350 mm deep |
Weight (approx.) |
2.6 kg |
Display |
240 x 64 LCD with CCFL backlight |
Printer |
320/640 dot thermal printer |
Keypad |
20 key membrane keypad |
Programmable Cooling Rate Range |
-0.01 °C/min to -99.9 °C/min |
Number of profiles |
10 |
Steps per profile |
32 |
Number of stored runs |
10 |
Chamber Specification |
|
Weight (kg) |
23 |
Capacity (litres) |
16 |
Chamber dimenisions |
350 mm high x 230 mm wide x 230 mm deep |
0.25 ml straws |
608 horizontal or 250 vertical |
0 5 ml straws |
68 |
2 ml ampoules |
726 |
50 cc blood bags |
22 |
250 cc blood bags |
11 |
500 cc blood bags |
11 |
Power requirements (inc. MRV Controller) |
115\1~ 50/60Hz 1500VA / 230V- 50/60Hz 1500VA |
Recommendation of additional equipment |
5 psi System System Pump - LNP4-C System Dewar - MVLAB 30 22 ps System System Cylinder MVEURQCYL23OSB Phase Separator MVPHASE |
(Alternative) |
22 psi System Vacuum Jacketed Pipe Work System Phase Separator - MVPHASE |