JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
Modell: P-950
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Pump P-950 features:
Operating pressure up to 1.0 MPa (10 bar, 145 psi).
Flow rates up to 50 ml/min.
A pressure sensor connected to the pump outlet.
Pump P-950 is a single-channel laboratory pump for use as a sample pump in ÄKTAdesign liquid chromatography systems.
An eluent in an external vessel is drawn into three liquid chambers in the pump. A stepper motor assembly performs the pumping action of the chambers. This assembly acts on the chambers in a sequential order, which gives a smooth flow from the pump
The pressure generated by the sample pump is continuously monitored by the pressure transducer housed in the pressure sensor housing. The signal, which is proportional to the pump pressure, is read by UNICORN via the UniNet-2 connection.
The pump has two connectors on the bottom side for connection to the UniNet-2 communication network. This enables control of the pump from UNICORN, version 3.2 or higher, via Pump P-900 or Pump P-920. The UniNet-2 Gable also supplies power to the pump.
Pump P-950 has one inlet and one outlet connected to three liquid chambers. The chambers haue flexible membranes which do the actual pumping of the liquid. The membranes are actuated by pistons driven by a rotating stepper motor assembly. This gives a sequential Operation on the chambers, which results in a smooth and continuous liquid delivery.
Each of the three liquid chambers has a flexible membrane and two holes for inlet and outlet. The inlet to each chamber is fed from the pump inlet. A rotating manifold ensures that only one chamber inlet is connected to the pump inlet at a time. The membranes are actuated by pistons in a sequential order from completely pressed out to fully retracted. Hence, one chamber will draw solvent while the second is expelling solvent and the third is about to starr drawing or expelling.
When a chamber is full, the rotating manifold closes the chamber inlet and opens the chamber outlet instead. Therefore, no check valves are required. At the same time, The piston starts to press on the chamber membrane. This forces the solvent out from the chamber and through the pump outlet. On the way out, the solvent passes the pressure sensor housing where the pressure is measured.
The sequential pumping action of the pistons is provided by a stepper motor through an axial bearing. The bearing is slightly tilted, which creates a reciprocal motion on the pistons during the rotation.
The stepper motor has automatic speed control to reduce pulsation.
Flow rate range 0.1-50 ml/min in steps of 0.1 ml/min
Pressure range 0-1.0 MPa (10 bar, 145 psi)
Flow rate accuracy ±3% or ±0.1 ml/min whichever is greater
Flow rate reproducibility rsd < 2% or ±0.1 ml/min whichever is greater
Viscosity Max. 5 cP for complete flow range. At reduced flow rate (≤ 10 ml/min): max. 10 cP.
Pressure sensor
scale error Max. ±2%
Offset error Max. 0.01 MPa/week
Tubing connectors
pump inlet male UNF 5/16"
pump outlet male UNF 10-32
pressure sensor inlet male UNF 10-32
pressure sensor outlet male UNF 10-32
Internat volume 1.1 mi including pressure sensor housing
Control Via UniNet-2 Gable connection
Degree of protection IP 21
Wetted materials
liquid chambers Simriz, PEEK
pump outlet and inlet Polyethene, titanium
rotating manifold Ceramic, Kalrez
pressure sensor outlet PEEK
and inlet
pressure sensor titanium
Chemical resistance The wetted parts are resistant to the chemicals listed below (synergistic effects haue not been taken into account; room temperature and limited over-pressure is assumed).
Unless otherwise stated, all concentrations are 100%:
Acetic acid, 0.1 M
Acetone, 1
Aqueous buffers, pH 2-12
Decon 90, 10% (for washing only)
Ethanol, 20%
Ethanol, 96% (for washing only)
Ethylene glycol
Formic acid, 1%
Guanidine, 6 M
HCI, 0.1 M
Isopropanoi, 30%
Lysozyme, 2 mg/ml
Methanol, 20%
NaOH, 0.1 M
NaOH, 1 M (for washing only)
SDS, 10% (short term use)
TFA, 0.2%
Triton-X, 2% (short term use)
Urea, 8 M
Power requirement 32 V DC
Environment +4 to +40 °C
10-95% relative humidity
84-106 kPa (840-1060 mbar)
Dimensions, H x W x D 120 x 100 x 140 mm
EMC standards This product meets the requirements of the EMC Directive 89/336/EEC through the harmonized standard IEC/EN 61326-1 (emission and immunity).
Note: The declaration of conformity is valid for the Instrument if it is:
used in laboratory locations
used in the saure state as it was delivered from Amersham Pharmacia Biotech except for alterations described in the User Manual
connected to other CE-Iabelled Amersham Pharmacia Biotech modules or other products as recommended.
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie