Perkin Elmer Autosystem 1022 P
Objektnummer | B00012686 |
---|---|
Seriennummer | 012686 |
Object Naam | Perkin Elmer Autosystem 1022 P |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
What Is the 1022 GC Plus?
The 1022 GC Plus is a gas chromatography system made up of hardware and software that collects, stores, and processes chromatographic data.
The features included in the 1022 GC Plus were carefully designed to increase laboratory productivity and throughput, and yet still retain the ease-of-use and versatility all operators desire. The 1022 GC Plus includes all the vital features required for efficient chromatographic analysis; among these are
n Control of the GC functions and the autosampler through software
n Data collection from two detectors using the saure method (with the two-channel Option)
n Real-time display of the sample chromatogram
n Replots of stored chromatograms
n Sample analysis reports, customized to your needs
n Batch reprocessing of multiple sample runs
n Archive analytical results to dick for permanent record
This tutorial assumes you haue a 1022 GC Plus data collection system: This includes the Autosystem GC configured with at least one injector/detector (autosampler is optional), attached to a single-channel Model 1022 Personal Integrator. The screens shown in this tutorial are for a single-channel system. Screens for dual-channel systems may contain additional Information.
The 1022 GC Plus provides easy access to all of the above features and more by virtue of screen Windows and dropdown menus. From startup, the top-level screen's menu allows you to choose the work environment of your choice.
About the Keyboard
The keyboard is your link to the software. The keyboard has 35 color-coded keys divided into the following groups:
Function keys -- blue
Parameter keys -- white
Entry keys -- gray and black
Control keys -- yellow (The [Run] key is green.)
An audible short beep sounds every time a key is pressed. A long beep sounds when an error has been committed. The key groups and their locations arg illustrated in Figure 1-3.
Optional
(Description, depend on equipment)
RD Overview
Flame lonization Detectors are mass sensitive and used for the destructive analysis of organic compounds.
On entering the detector, the Sample is mixed with hydrogen and then burned in air, generating ions. These are collected and measured by the detector, the concentration being proportional to the amount of compound present.
Ion collection is enhanced by a polarized electric Field created by applying a negative voltage (200 volts) to the jet tip.
Sensitivity is affected primarily by the hydrogen flow. A schematic of an FID is shown below.
Setting up a TCD n
TCD Overview
The Thermal Conductivity Detector is a dual channel detector which measures the difference in thermal conductivit) betwecn carricr gas flowing through a reference channel and carller gas + samplc flowing through an analytical channel.
Four tungsten-rhenium filaments are connected in a bridge circuit, two in cach channcl. The TCD is set up wich the saure amount of carricr gas flowing through both channels. The presence of a samplc component in the carricr gas flowing through the analytical channcl changes the resistance of the filament.s in that channel. This unbalances the bridge and produces a signal proportional to the amount of sample
.
Using a TCD With the Autosampler
When using a TCD wich a GSV (Gas Sampling Valve) or the autosampler at high sensitivity, a minor baselirre upset may occur at the time of injection.
If the signal goes below zero, incorporate a timed event Autozero to bring the signal back before peaks of interest elutc.
Observe the initial chromatogram to deter ine the entry to makc f or the timcd event.
Controlling the Autosampler 9
The autosampler contains three basic parts: a syringe tower, a turntable, and a sample tray (see Figures 9-1 and 9-2). The syringe tower can contain either a 0.5-µL, 5.0-µL, or 50.0-µL syringe. The sample tray contains positions for eighty-two 2-mL sample vials. The turntable contains one priority sample vial, four 4-mL waste vials, and four 4-mL wash vials.
Controlling the Autosampler
The autosampler can be configured to operate in one of two modes, single or multi program.
Single-program mode -- In this mode the autosampler runs a single autosampler program that specifies which injecior is to be used, the size of the injection, and the number of injections per vial. Samples are injected sequentially starting with the fii occupied vial position until no additional vials are detected. The GC is controlled by the parameters in the Active Method.
Multi-program mode -- In this mode the autosampler runs two programs consecutively. Each program specifies: the method to be used (each program can u a different method if desired), which injecior to use, the size of the injection, the number of injections per vial, and the starting and ending vial numbers. As each program is run, the system sets up the specified method as the Active Method.
The remainder of this chapter includes the following procedures and topics:
Setting Up Syringe Wash Parameters
Setting Injection Mode Parameters
Running Samples in Single Program
Running Samples in Multi Program
Other Autosampler Tasks