Packard Multiprobe 204
Objektnummer | B00011009 |
---|---|
Seriennummer | 011009 |
Object Naam | Packard Multiprobe 204 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
manufacturer : Packard
model : Multiprobe 204
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
1 Level Detector Cable
2. Sampling Tips
3. Tip Holders
4. Connector Block
5. Robotic (XYZ )Arm
6. Safety Shield
7. ZRacks
8. Syringe Pump Outlet Tubing
9. Tubing Guide
10. Front Shield
11. Top Cover
12. Safety Shield Retainer Screws End
13. End Cap
14. Syringe Valves
15. Peristaltic Pump Outlet Tubing
16. Syringe Pump Inlet Tubing
17. System Liquid Container
18. Peristaltic Pump Tubing
19. Peristaltic Pump
20. Peristaltic Pump Manifold
21. Syringe Pumps
22. Grid Deck
23. Work Surface
24. On/ Off Switch
The MuItiPROBE Automated Liquid Handling System is a fully automated sample processor. Automating the process of liquid handling greatly increases the speed and accuracy with which sample preparation can be carried out. The instrument emphasizes precision, accuracy, minimal carryover and ease of use.
The instrument's modular design minimizes down time due to servicing and keeps daily maintenance to an absolute minimum. High precision syringe pumps are used for pipetting of sample, reagent and diluent. A peristaltic pump is utilized for high speed tip washing.
Eliminating CarryOver
The need for minimal or zero carryover is of paramount importance. To that end, the sampling tips of the instrument each have a liquid level detector that causes the tip to stop as soon as liquid is detected. A programmed submerge depth ensures that sample liquid. will be aspirated without unnecessary external contamination of the sampling tips. As liquid is aspirated, the sampling tips follow the liquid surface down maintaining a constant submerge depth.
Flexibility
Throughput of the instrument is maximized by the simultaneous operation of up to four sampling tips. The instrument utilizes a feature called Varispan " Varispan is the ability of the instrument to automatically vary the Y spacing (front to back) between the four sampling tips. This means that you can use several combinations of tubes, bottles, and plates together, without sacrificing throughput. Th minimum spacing between the tips is 9 mm; the maximum spacing is 31 mm.
The 101 does not utilize Varispan since it offers a single tip only.
Utilizing independent liquid level detectors, the instrument can aspirate four samples simultaneously, with or without reagent and diluent; and dispense to other tubes, microplate wells, or other destination vessels.
This kind of flexibility renders the instrument the ideal solution for most laboratory methodologies in the clinical, life science, or pharmaceutical environments.
Instrument Models
The MultiPROBE Automated Liquid Handling System offers the 100 series and the 204. The 100 series offers the 101 single tip system , the 104 four tip system and the 104DT disposable tip system. The 204 offers a four tip system only.
Both the 100 series and the 204 share the same liquid handling components and also offer a grid deck system. The grid deck provides for the flexible arrangement of racks. When you use the grid deck, the number and variety of rock positions is expanded. Rocks can be rotated 90° and 180° for example.
There is one large grid plate on the work surface of the 100 series. There are three grid plates on the work surface of the 204. Collectively these plates comprise the grid deck.
The physical dimensions of the two systems differ: the 204 offers about twice the deck capacity as the 100 series. The increased deck capacity allows the system to process more vessels at one time.
Example deck capacities of the 100 series and the 204 are shown below. Capacities may vary based on vessel size and deck orientation.
MuItIPROBE 204 Deck Capacity
Tube to tube Up to 984 test tubes
Tube to microplate Up to 500 primary tubes and 12 microplates
Microplate to microplate Up to 24 microplate
Teflon®Coated Tips
Both systems are equipped with Tefloncoated fixed tips. The tips can be washed between samples both internally and externally at a specially designed wash station. This wash process, combined with. the Teflon coated tips, helps to keep carryover to a minimum.
The wash station is Iocated an the surface of the Instrument. The volume and rigor of the wash is userprogrammable, and is automatically controlled by the instrument.
Disposable Tips
The disposable tip system can be equipped with conductive disposable tips or non conductive disposable tips. Conductive tips are capable of detecting the surface of Tonic and non ionic solutions. Non conductive tips are not capable of liquid detection.
Both varieties of tips come in 200u1 ,, 20u1, and IniL sizes.
Both conductive and nonconductive disposable tips are available from Packard. Contact your sales engineer for Packard Instrument Company order information.
Instrument Components
The MultiPROBE Automated Liquid Handling System is composed of software and hardWare components. The liquid handling portion of the system is the most visible and critical portion of the hardware.
The liquid handling components of the instrument are controlled by the software. The software resides an the hard disk of the computer. The hardware is based an a modular design concept in which each of the major instrument functions are performed by an independent component of the instrument.
The principle liquid handling components of the instrument are the:
§ Syringe Pump Modules.
§ Peristaltic Pump.
§ XYZ Movement Mechanism (Arm).
§ Liquid Detector.
§ Wash/Waste Station.
Syringe Pump and Peristaltic Pump
The syringe pump module and the peristaltic pump are shown in Figure 2-1. The syringe pump module consists of a syringe Barrel with a 4port valve. The'valve is also connected to the peristaltic pump, the sampling tip, and the system liquid container. The parts that come into contact with the liquid are made of rubberized plastic tubing, santoprene tubing, and glass.
The syringe plunger is driven by a stepper motor. Both the valve and the stepper motor are controlled by the computer. Each syringe pump module performs the aspiration and dispense functions of one sampling tip.
Specifications
Pumps
Up to four high precision Pumps for precision liquid handling. Standard syringe sizes are 500 uL; optional syringe sizes are also available. A peristaltic pump for tip wash.
Microcomputer
n IBM compatible computer (80386 or higher) with 2MB RAM.
n 40MB hard disk or higher.
n 3.5" 1.44MB floppy disk drive.
n VGA color graphic adapter.
n DOS 5.0.
n Mouse and mause driver (Microsoft compatible).
n Enhanced function keyboard.
n VGA color monitor.
n At least one RS-232 input/output, one mouse port, and one printer port. Other configurations may require additional ports.
Precision and CarryOver
§ CV < 1% at 100% syringe volume.
Carryover of less than 1:1,000,000 with adequate tip wash.
Physical Dimensions
MuItiPROBE 204 Overall
Height 27 inches 686 mm
Width 51 inches 1295 mm
Depth 32 inches 813 mm
MuItiPROBE 204 Total Workspace
Height 4.5 inches 115 mm
Width 46 inches 1150 mm
Depth 11.25 inches 286 mm
Approximate Weights
Net Weight 200 lbs 91 kg
Shipping Weight 265 lbs 120 kg
Electrical Requirements
100, 220, 240 VAC +-1%; 50/60 Hz, 350 VA.
Environmental Requirements
Operating Ambient Temperature 59-95° (15-35°C)
Operating Relative Humidity 60% to 95% at 85°F (30°C)
Options
n Dot Matrix Printer: 80column, high Speed, bidirectional printer with IBM compatible parallel interface.
n 1 mL (1000uL) Syringe Assembly: Includes up to four lmL syringe barrels, plungers and piston seals for larger volume applications.
n 2.5 rnL (2500uL) Syringe Assembly: Includes four 2.5 mL syringe barrels, plungers, and piston seals for larger volume applications.
n Customer Maintenance Kit: Parts required for proper preventive maintenance of the system. Includes two syringe barrels, two valves, four piston seals, four sampling probes, and liquid tubing.
n Disposable Tips: Disposable tips help to eliminate carryover. Disposable tips are available in both liquid sensing (conductive) types and non sensing (standard) styles.
n Barcode System: Available for the MultiPROBE 204 only. Helps to ensure positive sample identification. System includes 16 cassette barcode deck with barcode scanner. 12 well cassettes can accommodate a total of 192 tubes (16mm or 17mm). 16 well cassettes can accommodate a total of 256 tubes (10mm, 12mm, or 13mm).