JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
Firma: Milton Roy
Modell: LDC 200
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
General
The spectroMonitor® D variable wavelength detector is designed for applications requiring the measurement of ultraviolet light absorption through a column effluent. Small cell volumes and high sensitivity make it well-suited for use as a detector in high performance column liquid chromatography, although it is not necessarily limited_
to this application. This instrument is designed for years of trouble-free service. If difficulty is experienced, please write or call LDC/Milton Roy, Riviera Beach, Fla. or your nearest regional office for assistance. See page IV-3 for locations and telephone numbers.
The spectroMonitor® D provides wavelength coverage in the UV/visible wavelength range of 190 to 700 nm. The cell has a zero dead volume, dual path, flow type configuration. A dual beam (sample reference) optical system is used to compensate for source energy variation and as the reference cell is a flow thru type, it may also be used for solvent absorbance compensation. Minimum spacing of sample and reference beams is achieved by a precision quartz fiber optic beam splitter which focuses both beams on their respective cell paths.
Wavelength dispersion is accomplished by means of a concave holographic diffraction grating. Entrance and exit slits are defined by the source and beam splitter geometry rather than by discrete slits. The concave nature of the grating focuses the entrance slit on the exit slit without the usual two concave mirrors The simplicity of this type of monochromator enhances stability and reliability, maximizes energy throughput, and simplifies adjustments.
...for LDC/Milton Roy spectroMonitor® D, when equipped with the standard maxN"" Series LS-23 cell, and operating at 25°C:
POWER REQUIREMENTS : 100, 120, 220 or 240 VAC + 10%, 50/60 Hz, 100W.
Integral filter supresses external line noise.
FUSES: 100, 120 VAC, 1.5 Amps ; 220, 240 VAC, 0.75 Amps (Slo-Blo).
WEIGHT: 20.75 lbs. (9.41 Kg).
DIMENSIONS: 11" (27.44 cm) W x 18" (45.7 cm) D x 5 3/4" (14.6 cm) H.
FLUID CELL TYPE: maxNn" Series high efficiency, 1000 psig. 10 mm pathlength, with flowing reference, 316 stainless steel, removable from front of instrument. Zero dead volume high flow efficiency design (suitable for microparticulate column packing materials).
FLUID CELL VOLUME: 14 uL sample and reference cells (f ul l 10 mm path lengt h) .
FLUID CELL PRESSURE: 1000 psi, designed to eliminate cross contamination (recycle and series detection compatible).
SPECTRAL BANIMI DTH: 5 nm. 1.4.9 WAVELENGTH RANGE : 190-700 nm.
ABSORBANCE RANGES: Eleven steps from .001 to 2.0 absorbance units full scale (AUFS) as follows:
.001 .100
.002 .200
.005 .500
.010 1.000
.020 2.000
.050
RESPONSE TIME: Switch selectable active filter, 0.05, 0.1, 0.5, 1.0 and 5.0 seconds (1.0 second specification setting).
ENERGY SOURCE: 35-Watt deuteriun lamp (incorporating a window with high UV transmittance). The lamp filament heater current can be switched off or reduced by one-half during normal operation. Single energy source for both UV and visible ranges.
MONOCHROMATOR: Concave holographic grating.
OPTICAL SYSTEM: Double beam, polished quartz fiber optic beam splitter.
DETECTION: Dual UV enhanced silicon photovoltaic cell.
NOISE: Noise levels may vary at wavelength extremes. Short term noise, dry cell, (peak-to-peak) at 1 second response time is typically less than:
2x10 -5 AU@200-300 nm
3 x 10 -5 AU @ 350 nm
3 x 10 -4 AU @ 550 nm
3 x 1,0 -4 AU @ 650 nm
The new LDC/Milton Roy spectroMonitor® D variable wavelength detector sets the new industry standard for high performance liquid chromatography (HPLC) spectrophotolnetric detectors. Differential absorbance measurements can now be made in the UV/VIS wavelength range of 190 through 700 nm without lamp changes. Plus, the new maxN'" Series high efficiency, high pressure fluid cell Features the lowest noise specification available only 2.0 x 10-5 AU. An integral very low volume heat exchanger
insures temperature equilibration and low baseline drift - less than 1 x 10 -4 AU per hour.
LDC/Milton Roy has achieved these remarkable noise and drift levels with a true 10 mm pathlength cell. Detectors which achieve low noise through the use of
short pathlength cells are not as senstive. For example, a detector having mm path cells will produce peaks (sign only one half as large as the spectro--, Monitor® D variable wavelength detector
DRIFT: Less than 1 x 10 -4 A.U. per hour (after warm up) in the UV ran,
LINEARITY RANGE : Linear to 2.0 AUFS 1% deviation (typical).
ZERO SUPPRESSION: Front panel and remote automatic zeroing for a ran; of +.75 AU.
RECORDER OUTPUT: 0 to 10 mV, 5 maximum source impedance.
COMPUTER OUTPUT: 1.0V per A.U.: 1K source impedance.
MATERIALS OF CONSTRUCTION
(Wetted surfaces only) : 316 stainless steel, Teflon® and quartz.
FLUID CONNECTION: .010" ID x
1/16" OD 316 stainless steel tubing accepts all 1/16" standard zero dead volume fittings.
FRONT PANEL DIAGNOSTICS:
A. Direct Reading of Absorbance Units.
B. Direct Reading of Sample and Reference Energy.
C. Direct Reading of Source Lamp filament current.
D. Direct Reading of Zero correction
E. LED Indicators for supply voltage (+ 15VDC).
FRONT PANEL SIGNAL POLARITY REVERSAL.
FRONT PANEL EVE NT MARK BUTTON.
OPTIONAL FLUID CELLS: Prep, and Semi-Prep/maxN®, 3mm/ 1 uL/microCelln'.
Dual beam configuration provides excellent long term baseline stability and allows the use of a reference cell to compensate for mobile phase background absorbance. This makes it possible to find the peak absorbance wavelength by scanning manually .
Optical components common to the dual beam utilize optical and mechanical components which function symmetrically with both beams, thus noise and drift are held to a minimum. Additionally advantageous is the fact that aging of components is in common with both sides, as are wavelength-dependent characteristics.
Alignment of the optical system is greatly simplified by using the source lamp aperture as the entrance slit to the monochromator (easy replacement of lamp) and by incorporating the exit slit and beam splitter into one component.
Events such as time of sample injection can be recorded by pressing the MARK button.
Optics simplicity provides ease of maintenance, and minimum transmission and reflecting surfaces.
Integral heat exchange fluid cell reduces flow sensitivity.
Solvents contact materials of 316 SS, Tefloe and fused silica only.
A maxN'" Series LS-23 Fluid Cell has been incorporated in the spectro-Monitor® D, and is available for all previous spectroMonitor® III's as a factory or retrofit option. Some advantage s of the maxN"" cell are:
A. Optimized plate count in microparticulate column s without sacrificing detector sensitivity (signal/noise).
B. Improvement of bubble clearing by enabling slight back pressure to be added to the fluid cell (1000 psig mal
NOTE: Back pressure regulators are 1 commercially available for adjusting the exact back pressure required.
C. Additional detectors can be added downstream without exceeding detector pressure rating (1000 psig).
D. Recycle chromatography is possible with the appropriate pump or valve arrangement.
E. The cell will accept higher flaw rates without leakage.
Holographie grating reduces spurious wavelengths and allows high levels of usable throughput energy.,
A computer output signal of 1V/ is provided for data reduction, and an output signal of 10 millivolts, full scale, is provided for recording absorbance.
This ins t rumen t is configure d into a single unit housing the cell, optics, and measurement electronics. The unit contains output signal ports for recording purposes, electronic controls, and power supplies.
The sample stream and a reference stream (if desired) are connected to t measurement cell at the inlet tubes (labeled SAMPLE IN and REF IN). Separate outlet tubes near their respective inlets are provided for connection for further processing or sample collection.
The new LED Diagnostic Circuitry, introduced in the spectro Monitor D, provides the chromatographer with a switch selectable digital display to indicate the follwing:
A. AU: Direct reading of absorbance units.
B. ENERGY (S and R): Direct Sample and Reference readings in mV. Record the mV readings at various wavelengths with the clean, new cell for future reference. A decreased reading at a later time may indicate a contaminated cell or lamp deterioration.
C. DACE: Direct reading of filament current at the deuterium source lamp. Typical display with a healty lamp is approximately 300 mA.
D. ZERO: Displays (in absorbance units) amount of zero correction applied.
E. +15V: Proper operating voltages are indicated by a separate two-color LED. When green, it indicates proper supply voltages (+15V) are present in the signal processing circuits. When red, either the positive (+), the negative (-), or both supplies are abnormal.
A single pushbutton on the front panel automatically zeroes the detector, signal. The autozero function will compensate for +0.75 AU of background. This helps to eliminate the often tedious adjustments normally associated, with the initial setting of detector baseline. The autozero function is also valuable tool in resetting baseline, after wavelength, solvent or temperature changes.
An offset adjustment on the front panel allows the user to shift the recorder baseline and still maintain automatic zeroing.
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie