JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Als je dit artikel tweedehands koopt in plaats van nieuw, bespaar je evenveel CO2 als wanneer je 1980 km rijdt met een benzineauto.
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
Manufacturer: Qiagen
Model: EZ1 Advanced XL
The following illustrations and descriptions are model-related and taken from brochures.
They do not reflect the scope of delivery of the system.
Please refer to the offer text for the exact scope of delivery.
Technical data
Operating conditions
Power 100-120 V AC, 50/60 Hz, 600 VA (North America and Japan) 200-240 V AC, 50/60 Hz, 600 VA (Europe) Mains voltage fluctuations must not exceed 10% of the rated voltage.
Fuses 6.3 A (250 V) slow-blow (for 100-120 V AC) 3.15 A (250 V) slow-blow (for 200-240 V AC)
Surge protection class II
Air temperature 15-30 ºC
Relative humidity 15-75% (non-condensing)
Height above sea level up to max. 2000 m
Operating location Indoors only
Pollution degree 2
Environmental hazard class 3K2 (IEC 60721-3-3) 3M2 (IEC 60721-3-3)
Transport conditions
Air temperature -25 ºC to 60 ºC in manufacturer's packaging
Relative humidity Minimum 15% to maximum 75% (non-condensing)
Environmental hazard class 2K2 (IEC 60721-3-2) 2M2 (IEC 60721-3-2)
Storage conditions
Air temperature 5 °C to 40 °C in manufacturer's packaging
Environmental hazard class 1K2 (IEC 60721-3-1) 1M2 (IEC 60721-3-1)
Mechanical data and features
Dimensions Width: 51 cm Height: 57 cm Depth: 51 cm 57 cm (including power plug)
Weight 48kg
Device features ï¬
Automatic nucleic acid isolation using magnetic particles ï¬
Desktop device ï¬
Protocols on EZ1 Advanced XL Cards ï¬
Use only with QIAGEN EZ1 kits ï¬
Aspirate and dispense 14 samples or reagents simultaneously using the 14-channel pipetting head ï¬
Separation of the magnetic particles from the reaction mixture using a patented technology ï¬
Parallel processing of up to 14 samples per run ï¬
Control via user interface (VFD display) ï¬
Sample temperature control through integrated heating system
Data traceability
The control panel barcode reader and keyboard enable tracking of sample and consumable data. System and run data are saved in a report file that can be printed directly or transferred to a PC. Report files can be processed with a LIMS (Laboratory Information Management System) or other programs.
pipetting head
Includes 14 precision syringe pumps, each with a tip adapter that automatically attaches filter pipette tips. 50–1000 µl of liquid can be aspirated and dispensed into each pipette tip. The pipetting accuracy is: 50-100 μl: ± 5% 100-1000 μl: ± 2% The syringe pumps are air-filled. Saline liquids, alcohol, solvents and/or magnetic particle suspensions can be aspirated and dispensed. Air bubbles (air gaps) can be sucked in to prevent sucked liquid from dripping out. The pipetting head contains a magnet that enables the magnetic particles to be separated from a suctioned liquid. The filter pipette tips are picked up from the tip rack and placed back there after use. The pipetting head moves in the Z direction above the work platform.
Heating system
Accommodates the temperature-controlled positions of the reagent cartridges and has a working temperature range from ambient temperature to max. 95 ºC. The temperature accuracy of the heating block at 60°C is: ± 2°C.
Filter pipette tips
Are automatically attached to the tip adapters of the pipetting head during a protocol run to enable aspiration and dispensing of liquids. Pipetting volume 50–1000 μl per tip. Up to 28 pipette tip holders (each with one pipette tip) can be placed in the tip rack on the work platform of the EZ1 Advanced XL per run.
Consumables
The reagents are loaded onto the work platform in the form of reagent cartridges. These cartridges are supplied by QIAGEN pre-filled with the reagents. Up to 14 reagent cartridges are placed in a cartridge holder on the work platform per protocol run. Samples are placed in 2 mL sample vials on the work platform. Work steps that involve heating take place in the heating system, in which the temperature-controlled positions of the reagent cartridges are located during a protocol run. The purified nucleic acids are collected in 1.5 ml elution tubes.
UV lamp
Produce ultraviolet light with a wavelength of 253.7 nm (equivalent to Type C UV light).
capacity
Up to 14 samples per run
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie