Leica EG 1150
Objektnummer | B00019052 |
---|---|
Seriennummer | 019052 |
Object Naam | Leica EG 1150 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
manufacturer : Leica
model : EG 1150
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Leica EG1150
Convenient and comfortable tissue embedding center
Modern Technology for Comfortable Embedding
The new Leica EG1150 modular tissue embedding center incorporates two separate components, the Leica EG1150 C cold plate and the Leica EG1150 H heated embedding module. The independent modules offer the flexibility to arrange embedding workflow in the direction that best suits your laboratory.
Adjustable embedding center height
In addition to the already low, comfortable working position, now you can even adjust the work surface height for optimum ergonomics.
Left or right handed workflow
The modular system of the Leica EG1150 allows the placement of the cold plate onto either end of the heated embedding module allowing the tech nician to embed in either a right or left handed direction.
Rounded arm rests
Rounded arm rests provide a comfortable working position free from any hard pressure points on technicians arms.
Tissue cassette and mold warming trays located at the same level
No need for excessive arm movements while embedding. Tissue cassettes and molds are kept at the same level providing a comfortable workflow with minimum effort.
Position adjustable halogen light and magnifier
Bright, even illumination of the work area is provided by the position adjustable halogen lamp. A position adjustable magnifier is also available as an option to facilitate specimen orientation when embedding.
At a glance...
Leica EG1150 H
- Height-adjustable, rotary and fold-back clip for activating the paraffin flow with the embedding mold, manually or via foot switch
- Setting screw for precise paraffin flow rate adjustment
- Paraffin flow via gravitational force
- Spacious, heated work surface with paraffin drain system for interim storage of molds and cassettes
- Two heated, removable paraffin collecting trays
- Adjustable temperatures for paraffin reservoir, working surfaces and integrated warming trays, between 55 °C to 70 °C in 5 K increments
- Enhanced mode, selectable for rapid paraffin melting when working in shifts
- Programmable on and off timer
- Magnifier (optional)
- Foot switch (optional)
Leica EG1150 C
- Constant temperature of the cold plate at 5 °C
- Approx. 70 cassette molds capacity
- Acrylic cover (optional)
Technical Specification
Leica EG1150 C
Admissions: UL
Nominal supply voltages (AC ± 10 %): 230 V/50 Hz
120 V/60 Hz
100 V/50 - 60 Hz
240 V/50 Hz
Maximum power draw: 350 VA
Operating temperature range: +18 °C to +40 °C
Working temperature: 5 °C at 22 °C ambient
temperature , after 20 min.
Relative air humidity: maximum 60 %, non-condensing
Dimensions and weights
Width: 360 mm
Depth: 650 mm
Height: 360 mm
Cold plate ( WxD ): 330 x 370 mm
Cold plate capacity: 70 standard cassette molds
Weight: 23 kg
Leica EG1150 H
Admissions: UL
Nominal supply voltages: 100 120 V, 50/60 Hz
230 240 V, 50/60 Hz
Maximum power draw: 1100 VA
Operating temperature range: +18 °C to +40 °C
Working temperatures: 55 °C to 70 °C
adjustable in 5 K increments
Relative air humidity: maximum 60 %, non-condensing
Capacity
Paraffin reservoir: 3 l
Cassette tray/warming tray: approx. 100 cassettes
Dimensions and weights
Width: 500 mm
Depth: 640 mm
Height : 360 mm
Working surface (W x D): 2 x 210 x 175 mm
Cool spot: 68 x 68 mm
Weight: approx. 30 kg
The Leica EG1150 C and Leica EG1150 H instruments are manufactured in accordance with UL, CSA, IEC, C-Tick and VDE standards. The latest in development, production and testing facilities documented in accordance with ISO 9001 ensure the highest quality and reliability.
Comprehensive range of accessories on request.
Technical specification subject to change.