Labtoc TC, TOC
Objektnummer | B00012940 |
---|---|
Seriennummer | 012940 |
Object Naam | Labtoc TC, TOC |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
LABTOC is a fast, reliable and highly accurate system for the laboratory analysis of sample water.
Simple to use, LABTOC can be used by laboratory technicians with the minimum of training and still be relied upon to produce precisely accurate TOC and/or TC values from single or multiple samples with a range from 0-10 ppm to 0-4000 ppm.
LABTOC consists of an organics analyser, based on proven PPM PROTOC chemical technology , an auto-sampler capable of feeding between one and eighty eight separate samples to the analyser during a single run, and an lBM-compatible PC with exclusive, user-friendly software, which both controls the analytical process and monitors the results.
Competitively priced and highly flexible, LABTOC is ideal for applications where multiple
samples need to be taken from variety of areas or variable areas on a single site, or from a number .of sampling points on multiple sites for further analysis.
As such, it is suitable for use. by industry or by regulating authorities charged with monitoring widely divergent areas such as points along a river
LABTOC will also be of interest to Companies offering off-site sample analysis service to industry, water authorities in sewage receiving applications and environmental companies engaged in waste analysis and disposal contracts.
lncreasingly, the Total Organic Carbon content found in water streams is regarded as an excellent indication of water quality, and may protocols now specify TOC or TC analysis.
TOC testing can also compliment existing BOD or COD testing facilities, particularly if organics are of major importance in the analysis exercise.
LABTOC Systems can be custom-designed and built to customers own specifications and
software customised as required to meet more specialised requirements
FEATURES
User friendly Windows driven software
Provides TOC and/or TC analysis
Full on-screen and hard copy reporting
Range from 10 ppm to 4,000 ppm, fully adjustable
Multi-point calibration with 'Best Fit'curves
Print calc curve (with results)
Fully automatic QC diagnostic
Automatic re-calibration on failure
Multiple runs on each sample with SD, RSD and mean value
Automatic range adjustment for over ranging samples
Single and batch analysis (no syringe required)
Automatic shut off after batch analysis
No manual acidification of sample
PRINCIPLE Of OPERATION
The sample s continuously drawn in through the autosampler dip probe This is then joined by a continuous flow of acidified reactor fluid which - depending on the mode of operation - is either TC pumped directly to the injection valve, or TOC routed via an IC removal stage to the injection valve.
Once the .fresh sample has had time to flush out the injection valve it is switched by the PC for a precisely determined amount of time, diverting the flow of sample momentarily into the flow of fresh reagent which is being pumped constantly into the reactor
The organic carbon contained in the sample is then converted to CO 2 , by the UV light and the sodium persulphate. This is carried by a very constant flow of gas, firstly to a Gas Liquid Separator (GLS). The gas is finally dried by passing through a permeation dryer tube
CO 2 concentration is then measured by a solid state infrared detector which is tuned only for the detection of CO 2 . The output of the infrared is then fed back directly into the PC where the signal is measured and integrated to provide a precise measurement of TOC or TC, as required.
Control and Monitoring Options
The LABTOC analyser and auto-sampler units are controlled by an IBM compatible PC. Data produced by the analyser is sent to the PC in turn, where it can be displayed graphically and automatically stored on floppy disk for later retrieval or as a permanent record of sample data.
The PC features PPMs own exclusive Labmon TM Windows-driven software, providing a user friendly, clear and flexible means of controlling sampling and presenting sample data.
This data can then be displayed graphically and, if required, a hard copy can be made on a colour graphics printer.
Specifications
Analysis Models:
TC, TOC, TC and TOC
Sample Models:
Single sample Batch of up to 48/88 samples
Repeat Samplings:
From 1 to 3 runs (selectable)
Calibration:
Manual calibration, with choice of calibration curve.
Automatic calibration at start of batch.
QC calibration at selectable intervals during batch
Range:
Variable between 0-10 ppm to 0-4000 ppm
Detection limit:
1% of calibrated range
Linearity:
Better than 1% of calibrated range
Repeatability.
Within 2%
Analysis time:
Typically 6 minutes per sample
Data Handling:
By PC (manual supplied)
Records:
Results which are written to file and may be printed include calibration plots and tabular sample data. (On screen plot of measured concentration during run is no maintained)
Warm up time:
20 minutes from power on or stand-by
Analyser Output:
4-20 mA
Sampler Prep Time:
120 seconds
A/D base Address:
380 Seconds
Power: Voltage Frequency
Analyser: 240Vac 50 Hz
110Vac 60Hz
Auto-Sampler: 240Vac 50Hz
110Vac 60Hz
External Dimensions
Analyser: 550mm H x 300mm W x 550mm D
Weight (approx): 25 kg
Auto-sampler: 560mm H x 660mm W x 710mm D
Weight: 22 kg
Utilities Required
Gas: Nitrogen/Oxygen/Argon clean gas, ie. Dust and oil free to be supplied @ psi constant
Typical usage: TC 180ml/min
TOC 560 ml/min
Reagent
5 % sodium persulphate, 5% orthophosphoric acid in DI water
Typical consumption is 1ml/min
Options
IC Analysis: Allowing TOC by difference TC-IC = TOC
Low Level IR: Permitting an analysis range of 0-100 ppb up to 0-40 ppm