JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Als je dit artikel tweedehands koopt in plaats van nieuw, bespaar je evenveel CO2 als wanneer je 1130 km rijdt met een benzineauto.
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
Firma: Shimadzu
Modell: TOC 5050
Kommentar: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Measurement of TC (total carbon)
Pure air carrier gas is flow-regulated to 150mL/min. and allowed to flow through the TC combustion tube which is packed wich catalyst and kept at 680°C. When the sample entern the TC combustion tube, the TC (total carbon) in the sample is oxidized into carbon dioxide. The carrier gas containing the combustion products from the TC combustion tube flows through the IC reaction vessel, dehumidifier, halogen scrubber, and finally reaches the sarnple cell of the nondispersive infrared (NDIR) detector, which measures the carbon diox‑
ide content. The Output signal (analog) c :ff , the NDIR detector is
displayed as peaks. The peak areas are measured and processed by the data processing unit.
Since the peak areas are proportional to the total carbon concentrations, the total carbon in a sample can be easily determined from the calibration curve prepared using Standard solutions of known carbon content.
Total carbon is the sum of the TOC (total organic carbon) and the IC (inorganic carbon)
Measurement of IC (inorganic carbon)
The sample is injected into the IC reaction vessel which has carrier gas bubbling through the IC reaction solution. Only the inorganic carbon in the sample is converted into carbon doxide, which is then detected by the NDIR detector.
The concentration of inorganic carbon is the sum of carbonate and hydrogen carbonate.
Measurement of TOC (total organic carbon)
The TOC concentration is obtained by subtracting the IC concentration from the TC concentration.
Measurement of NPOC (non-purgeable organic carbon)
An acidified sample is sparged with.high purity air to remove the IC; then the TOC content is measured directly. The result is generally called TOC, out fiere it is specifically caIed NPOC (non-purgeable organic carbon) to distinguish it from the TOC value obtained from the differente between TC and IC. The Spargrog process will remove both IC and those organic carbon cornpounds that are volatile at ambient temperatures.
Specifications
Analyte
TC, IC, TOC (TC-IC), NPOC (non-purgeable organic carbon)
Method
Combustion/non-dispersive infrared gas analysis method
Combustion temperature
680° C
Measuring range
50ppb to 4000ppm (to 5000ppm for IC)
Average analysis time
2 to 3 minutes for both TC and IC (4.5 minutes for TC and 3.5 min. for IC at the longest)
Repeatability
Standard deviation is less than 1% of full scale for the range less than 2000ppm (less than 2500ppm for IC), and less than 2% for full scale for the range from 2000ppm to 4000ppm (from 2500ppm to 5000ppm for IC).
Sample introduction
Automatic injection
Sample injection volume
4 to 250 µ L
Pretreatment for IC
Automatic sparging function
Carrier gas
Cylinder of high-purity air, about 600kgf/cm 2 (7kgf/cm 2 max.) in supply pressure; 150 mL/min. in flow rate (300mL/min. including sparging)
Data processing
.
Detector signal
Linearization, baseline correction, peak detection, and area calculation
Data
Calculation of calibration curve concentration using unlimited number of points (one to four points for stand-alone mode); automatic selection of best calibration curve; store an unlimited number of calibration curves; automatic exclusion of anomalous value(s) and automatic re-analysis/re-calculation; calculation of standard deviation and coefficient of variation, automatic re-analysis with different measurement range and/or different sample volume when response goes off scale.
Instrument control
Aspiration, measurement, and injection of sample; TC furnace temperature; ON/OFF of carrier gas and sparge gas.
Other features
Automatic selection of the optimum set of operation conditions; maintenance/self-diagnostics, warning of abnormality; timer for restarting from the running mode.
Display
White liquid crystal display with back-light, 640x400 dots, 88 characters x 22 lines.
Printer
Thermal, 240-dot graphic printer, 40 characters/line, 110 mm in chart width.
Ambient temperature requirements
5° to 35° C
Power requirements
100, 110, 115, 120, 127, 220, 230, or 240V as ordered, ±10%, 50/60Hz, about 300 VA power consumption . (500VA max.)
Approx. dimensions and weight
480 W X 525 D X 480 H mm (excluding projections), 46 kg
Optional equipment: SSM-5000A solid sample module
The system is complete with the solid sample modale SSM-5000A.
· switch between aqueous and solid samples without further instrument conversions
· large sample size of up to 1 g
· separate TC determination (total carbon) and IC (inorganic carbon) enable the exact determination of the TOC contents
· high sensitivity enables its use in cleaning validation using the glass fibre swab method without the need for extraction
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie