Jasco HPLC
Objektnummer | B00016980 |
---|---|
Seriennummer | 016980 |
Object Naam | Jasco HPLC |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
model : HPLC
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The devices are modular designed. Please find the modules you are looking for.
Model PU-980 HPLC Pump
Microprocessor-controlled HPLC Pump with the most advanced proven pumping mechanism
Model PU-980 intelligent HPLC pump covers a wide flow rate range from 1 µl/min with a flow rate precision as good as ± 0.1 %. Versatile programming capabilities allow sophisticated time-based programs of high binary and low pressure ternary gradient elution, flow rate, solvent selection, etc., meeting numerous requirements on HPLC applications in various fields. Model PU-980i Inert HPLC pump assures biological separation without contact with any metallic material.
Features
- Compact, space saving design as small as 150 mm with / 150 mm height
- Built-in program allows high-pressure gradient operation of 2 PU-980 pumps or low-pressure gradient operation of one PU-980 pump and proportioning valve without any external system controller
- Automatic plunger cleaning function provided as standard
Main specifications PU-980 HPLC Pump
Flow rate range: 1 µl/min to 10.0 ml/min with 1 µl/min step
Flow rate accuracy: ± 2% of setting or ±10 µl/min, whichever is greater
Maximum pressure: 500 kgf/cm 2
Time program: 64 steps, up to 10 files
Dimension: 150 (W) x 464 (D) x 150 (H) mm
Weight: Approx. 10 kg
Model UV-970/Model UV-975
Model UV-970 / Model UV-975 intelligent UV/VIS detector covers a wide wavelength range from 190 to 700 nm with D 2 and tungsten lamps (Model UV-970) and from 190 to 600 nm with D 2 lamp (Model UV-975). Both models offers extremely stable baseline with low noise; 2 x 10 -4 ABU/hour, and ±0.5 x 10 -5 AU at 250 nm. Versatile time-programming capabilities are provided for wavelength, response, range, spectral scan, etc. A rapid scan feature allows on-flow spectral acquisition without interrupting chromatographic elution.
Features
- Compact, space saving design as small as 150 mm width/150 mm height
- High sensitivity measurement with the range of 0.0005 ABU
- Wide wavelength range of 190 nm to 700 nm for UV-970 (600nm for UV-975)
- High speed spectral scanning
- Time programming with 64 steps for easy and Optimum chromatographic runs
Specifications UV-975 UV/VIS detector
Optical System
Monochromator: Non-aberration Monk-Gillieson mounting
Diffraction grating: 1200 lines/mm
Spectral bandwidth: 8 nm
Wavelength accuracy: ± 2 nm
Wavelength
reproducibility: ± 0.1 nm
Light source: D2 lamp
Wavelength range: 190 - 600 nm
Photometric System
Type: Dual beam photometer
Noise level: ± 0.5 x 10 -5 AU (at 250 nm with standard response and empty cell)
0.64, 1.28, 2.56 AU/10mV S( short)
Response: Fast (0.05 sec), standard (1 sec), slow (3 sec)
Flow Cell
Type: Front loading cassette cell
Standard flow cell: Taper cell (10 mm path length)
Optional: Preparative cell, high pressure cell, semi-micro LC cell, PTFE cell,
etc.
Input/Output Communications
Analog output: One circuit for recorder output of 10 mV/FS, one circuit for
Integrator output (three settings)
Peripheral Connections: LC-Net, marker IN/OUT, autozero, leak output, program start,
RS232C (optional)
Program Functions
Time program: Time program for wavelength, response, autozero, sensitivity, and
spectrum measurement (in increments of 0.1 min up to 999.9 min,
maximum 64 steps)
Absorption spectrum
measurement range: 200 - 600 nm
Spectrum memory
function : Stores the recorded spectral scans and subtracts the basline.
Ten memories available.
Auto-lamp OFF: Set in 0.1 hour increments from 0.1 to 99.9 hours
Miscellaneous
Dimensions, mass: 150W x 464 D x 150 H mm, approx. 9 kg
Power requirements: 80 W maximum
Model RI-930 Detektor
Model RI-930 intelligent RI detector offers extremely low baseline noise and very stable baseline of 0.5 x 10 -8 RIU and less than 8 x 10 -7 RIU/hour under the conditions with flow cell filled with water and flow of THF with temperature change less than 1°C, respectively. The change of sensitivity range and the purging of reference cell can be done automatically by utilizing time-programming. In addition, temperature of heat exchanger is controllable in the range from 10°C above an ambient to 45°C.
Model AS-950 Autosampler
Model AS-950 intelligent autosampler allows injections up to 50 samples (standard) with high-reproducibility; better than 0.5 % R.S.D and 0.3 % R.S.D on partial loop and full loop injections, respectively. More features such as pre-column derivatization, sample dilution, sample cooling/heating (option) are also available. A wide variety of sample racks makes it possible to use almost all types of sample vials and tubes on the market. Model AS-950i lnert Autosampler of which materials in contact with solvent are polymer and glass is also available.
Specifications AS-950 Autosampler
Sample injection method: Fixed or variable injection (selection made by keypress)
Number of samples: 50 (2.0m1, 0.3m1 vials)
84 (0.5ml vials)
96 (microplate)
Sample rack: Holds 50 vials
Optional: Chromacol Mini Reck (03-CVG, holds 84)
Optional : Microplate Rack
Standard sample loop: 100 µl
Injection volume: Variable injection: 1 - 200 µI (up to 1000 µl with options)
Fixed injection: 5, 10, 20, 50, 100, 200, 500, 1000, 2000µ1
Repeatability: 0.5% (Variable injection, 10 µI)
0.3% (Fixed injection, 20 µl)
Contamination: 0.05% (for 20 gl injection volume)
Sample loss volume: 20 µI (up to 100 µl)
Sample cooling/heating: Electronic cooling/heating unit (optional)
+4°C or 37°C can be selected using a switch
Maximum pressure used: 350 kgf/cm 2
Materials used for
tubing connections: SUS 316, resin, hardened glass
Display: 16 character, 2 line LCD multi-display; settings
entered using numeric keys
Program-Controlled
functions: Program functions (64 steps) and 10 fites. Can randomly set range of sample numbers for injection, injection volume (when using variable injection) and number of injections. Can also execute temporary stop, high priority (urgent) sample processing and add, insert and delete steps.
Self-diagnostics: Checks memory (ROM ,RAM ), DC power, X,Y movement of syringe, Z movement of needle and valve rotation.
External control: Can be controlled by 802-SC or externally controlled through
RS-232C (optional).
Input/Output terminals: INJ. MARKER 3 circuits
STOP OUT 1 circuits
STOP IN 1 circuit
REMOTE INJ 1 circuit
Dimensions: 150 (W) x 300 (W) x 470 (D)
Mass: 12 kg
Power consumption: 50 W
Model HG 980-30 / Model HG 980-31 Mischkammer
These are high pressure gradient mixer modules up to 3 solvents. Model HG-980-30 is for general use in high-pressure-mixing gradient systems with conventional columns. Model HG-980-31 has higher mixing efficiency to offer stable baseline when a mobile phase with UV absorption and detection wavelength needs to be set bellow 230 nm.