Heraeus UT 5042
Objektnummer | B00013703 |
---|---|
Seriennummer | 013703 |
Object Naam | Heraeus UT 5042 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1 Mercury thermometer
2 Models 5050 and 5060:
Control knob for alr vent flap
(mode) 5042: air vent with slide, in the top)
3 Adjustable temperature Ihre cut-out 3a Red waming lamp,
indicating excess temperature
3b Reset button
4 Temperature controller
4a Locking device
4b Temperature control knob
4c White pilot lamp, indicating controller in operation
4d Socket for connection of temperature programmer or recorder
(model NR controller only)')
5 Green pilot lamp, indicatinoven in operation
6 Mains switch
7 Time switch
8 Push-button for time switch
9 Push-button without function
10 Push-button without function
11 Push-button for intemal lighting
---- Special attachment
*)When the oven is used without a programmer (recorder), the short-circuit plug must be inserted in the socket.
The ovens may be equipped with any one of the following temperature controllers:
Model ER eclectronic controller
With PD action
Model NR electronic controller
With PD/PID action
Mechanical controller
Both types of electronic controllers work in conjunction with separate platinum resistance thermometers Pt 100 as temperature sensors. The mechanical controller works in conjunction with an integrated temperature sensor.
Type
|
Temperature range
°C |
Connected load I
kW |
Holding power
kW |
Rated voltage
V.A.C.
|
Time required for empty oven to heat to 150°C rated temp. (-2%) (-2%) min. min. |
|
Ovens with electronic controller |
||||||
T 5042 E T 5042 EK T 5050 E T 5050 EK T 5060 E T 5060 EK UT 5042 E UT5042 EK UT5050 E UT5050 EK UT 5060 E *) UT5060 EK *) |
tA -250 tA -300 tA -250 tA -300 tA -250 tA -300 t AU -250 t AU -300 t AU -250 t AU -300 t AU -250 t AU -300 |
0,8 1,15 2,0 2,0 2,15 2,7 1,6 1,6 2,0 2,0 3,2 3,2 |
0,43 0,47 0,68 0,8 0,78 1,0 0,5 0,64 0,7 0,97 1,0 1,1 |
220 220 220 220 220 220 220 220 220 220 220 220 |
35 45 32 35 40 45 20 20 22 25 15 22 |
65 75 50 70 80 85 35 40 30 45 30 55 |
Ovens with mechanical controller |
||||||
T/ST 5042 T 5042 K T/ST 5050 T/ST 5060 UT 5042 |
40-250 40-250 40-250 40-250 t AU -250 |
0,8 1,15 2,0 2,15 1,6 |
0,43 0,43 0,68 0,78 0,5 |
220 220 220 220 220 |
52 90 36 85 32 |
75 115 65 110 50 |
*) Additionally equipped with asuction fan for fresh air, which is started and stopped by push-button (9). When this fan is started, the corresponding white pilot lamp lights up. |
Description
The ovens correspond to DIN-Standard 12880 Part 1, and have been type-tested according to DIN-Standard 12880 Part 2.
Protection:
Protection dass 1
Circuit connection:
Permanently installed power supply cable with earthing-contact type plug
Rated voltage, connected load and rated current:
See 1.1. and rating plate.
Rated frequency:
50/60 c/s
Protection against overheating, according to DIN-Standard 12880
Class 2 (adjustable temperature limit cut-out)
Working space:
That part of the internal space which has a distance from any of the inner walls corresponding to one-tenth of the respective internal dimension (see also DIN-Standard 12880 Part 2).
The spatial temperature differences are approx. ± 2 % of the rated temperature.
At lower temperatures, the absolute value of the spatial temperature differences is smaller.
In the case of ovens with a window in the door, the spatial temperature differences may be greater.
UT Ovens
With UT ovens for temperatures up to 250 °C, the spatial temperature differences are approx. ± 3.6 °C; with ovens up to 300 °C approx. ± 4.5 °C. The temperature fluctuations with time is ≦ 0.8 °C. (When an OptoelectronicThyristor Power Unit LE-16 is used in conjunction with a modified controller, DIN-Standard 50011 Part 1 is met).
These ovens have no gap in the door gasket for the air to enter.
With model 5042, air is continually drawn in by the fan when the vent hole is open, passing over the heating system into the internal space.
Model 5050 has two sockets in the rear wall, through which air is drawn in and hot air expelled when the oven is operating with fresh air.