Heraeus HB 2448 K
Objektnummer | B00018379 |
---|---|
Seriennummer | 018379 |
Object Naam | Heraeus HB 2448 K |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Description
A Class II cabinet consists of a confined work space in which a stable parallel flow (laminar flow) provides protection against cross-contamination between the surroundings, the operator and the product. All operations take place through the work opening. Sub pressure in the work chamber draws room air into the cabinet through the work opening and down through the suction holes in the front of the tabletop. By this the operator is protected against possible emission of harmful substances from the product with which the operator is working.
Technical description
Air movements:
Via the work opening room air is drawn in through the perforated area in the front part of the tabletop. The vertical superfiltered airflow from the main filter separates in the middle so that the air is partly sucked down through the perforated area in the front part of the tabletop and partly sucked down through the perforated area in the rear edge of the work chamber. The total amount of air is mixed below the tabietops.
Prefilter (on HBB only):
Degree of detention 99.99% of particles 0 0.3 pm (DOP-test). (The mixture of air from the work chamber and the work opening is filtered).
Fan:
The air is led to the fan placed in the top of the unit. The fan is of a seif-compensating type and has thus only an insignificant drop in the quantity of air by an increase in backpressure. By means of a built-in transformer the fan can be made to operate with increased power.
The air is then led to the pressure plenum. 25% is exhausted to the room through exhaust filters. 75% is led over the main filter and forms the unidirectional flow in the chamber.
Exhaust filter:
Filter efficiency 99.999% of particles 0 0.3 pm (DOP-test).
Main filter:
Filter efficiency 99.999% of particles 0 0.3 pm (DOP-test).
Alarms:
Exhaust
The unit has an alarm for too little exhaust air. The supervision takes place via pressure measuring over the exhaust filter - see also the paragraph concerning operation.
Front window
lf the front window is not in working position, i.e. if it is open or placed above the horizontal green marking, this is indicated by an alarm signal.
Technical data
|
HB 2448/ HBB 2448 |
H |
315 mm |
L |
1265 mm |
D |
Ø 160 mm |
Weight |
200/225 kg |
Capacity of trough |
10/6 l |
Quantity of exhaust air (nominal) |
400 m 3 /h |
Dry heat emitted (recirculation to room) max. |
530 W |
Dry heat emitted (recirculation to room) nominal |
335/465 W |
Dry heat emitted (exhaust to the outside) |
100 W |
Mains voltage |
220(115)* V |
Mains frequency |
50(60)* Hz |
Current intensity |
2 Amp |
Max. load an wall sockets |
6 Amp |
Required mains cutout |
10/16 Amp |
Sound pressure Ievel** (re 20 µPa) |
<55 dB(A) |
Sound Power evel***(re 1 pW) |
60/61 dB |
* Optional ** According to DIN 12950 Teil 10 *** According to DIN 46535 Teil 1 Klasse 3 (ISO 3746) |
|
Property of materials
Subjects Material Treatment
Front windows and side windows Clear polycarbonate
Window frames PVC
Upper part, return duct and Mild-steel plate 60 µm polyestercoating pre‑
bottom part ST 1203 DIN 16023 treated to corrosion class 1
Stand Iron pipe 60 µm polyestercoating pre
treated to corrosion class 1
Trough, tabletops and suction gate Stainless steel AISI 304 Polished
Functional parts of the cabinet
( 1) Valves*
( 2) Electrical outlet
( 3) Charcoal filter (4) Main filter
( 5) Centrifugal fan
( 6) Mains connection
( 7) Anti blowback valve*
( 8) Box containing the electrical parts
( 9) Exhaust filter
(10) Lamp cover
(11) Pressostats
(12) Control panel
*(13) Light fittings
*(14)Front window
(15) Work chamber
(16) Cover plate, front**
(17) UV-light*
(18)Trough
(19) Tabletops (tabletop*)
(20) Stand for HB tabletop version
(21) Stand for HB floor model
(22) Prefilter an HBB
(23) Levelling screws.