Genevac Mega 980SII
Objektnummer | B00010736 |
---|---|
Seriennummer | 010736 |
Object Naam | Genevac Mega 980SII |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Genevac
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Mega Evaporation Systems
Genevac's new Series II Mega Systems provide ultra high throughput solvent evaporation.
Accommodating samples in an extensive variety of microtitre or smaller formats, Mega systems are also designed to handle formats langer than a microtitre plate. Common examples are fraction collector racks from LC/MS systems, larger reaction blocks or proprietary sample formats. Evaporation Performance is similarto HT systems.
Common applications include
HPLC or LC/MS Purification
High Throughput Screening & Compound Storage
High Throughput Synthesis
Sample Handling & System Operation
Access to the evaporation chamber is via a top opening, powered aluminium lid. Samples are loaded into large sample swings, which are fixed to a high strength rotor. The evaporation chamber is constructed from corrosion resistant hard anodised aluminium. For high boiling point solvents (e.g. DMSO & NMP), the chamber and lid can be heated to 45°C to prevent solvent condensation during the evaporation process. This gentle heating can also be used to aid evaporation. Coolheat lamps provide most of the heat required for rapid evaporation of solvents. A powerful vacuum system ensures low pressure and low sample temperatures during evaporation. Similar to HT systems, vapours pass from the evaporation chamber into a VC8000T series cryopump/condenser. High boiling point vapours are condensed under vacuum, very volatile vapours pass into the CVP vapour vacuum pump and from the pump exhaust into a solvent waste condenser.
User interface - simple to use with sophisticated capabilities for optimum evaporation
Genevac Series II systems are easy to use, high performance systems. Evaporation runs are selected by highlighting a nun from a menu on a full colour LCD screen. Each nun has a user-defined description for easy identification. The embedded PC Stores up to 100 runs. This easy to use interface provides very simple and flexible operation, ideal for a multi user environment. A run is selected and started sample temperature control and shut down are automatic. For optimum evaporation settings, numerous parameters can be pre-set and stored for each run. The sophisticated software incorporates many safety interlocks to eliminate the risk of harm to the user, samples or system. Important run parameters are displayed "live" on an LCD screen and can be reviewed after each run. Run parameters can be altered during a run if necessary.
Coolheat technology and SampleGuard temperature control provide rapid evaporation
The systems generally consist of three main components: evaporator, cryopump and vacuum pump. Powerful gold plated Coolheat infra red lamps in the evaporator provide the heat required for very rapid evaporation of all commonly used solvents, including DMSO and waten. A high vacuum pumping system consisting of the CVP 100 vapour vacuum pump and the VC8000 cryopump creates low pressure and low sample temperatures during the evaporation process. The unique dual temperature SampleGuard temperature controller prevents the samples from exceeding the pre-set temperature ceiling by controlling the infra red heat input. In normal Operation sample temperatures need not exceed 40°C. Built-in pressure control and an optional extra set of Coolheat infra red Iamps can be utilised to accelerate the evaporation of water and other slow drying solvents.
High imbalance and sample weight limits ensure maximum flexibility and safe use
The Mega systems will operate safely with imbalanced loads of at least 200 g. A safety switch will shut the system down in a controlled way if this limit is exceeded. A visual warning will appear on the LCD display. The Auto-Balancing Mechanism Option can be fitted for loads over 200g imbalance.
Dri-Pure Anti-Bumping System prevents sample loss and cross contamination
Some solvents and solvent mixtures can "bump" unpredictably even under standard centrifugal evaporation conditions, causing sample loss and cross contamination. The optional Dri-Pure system prevents solvent "bumping" with problematic samples. This patented system combines a gentle, ramped application of vacuum and increased rotational speed at specific pressures to eliminate the sample loss and cross contamination caused by solvent "bumping".
Corrosion Proof Vacuum System
The Genevac designed CVP vapour vacuum pump is standard on all HT and Mega systems. Using a unique pumping principle, the CVP pump provides high vacuum, requires no oil changing or regular maintenance and is corrosion proof against all commonly used acids (including Trifiuoroacetic acid).
SPECIFICATION
Technical Data Mega 980/1200
Temperature controls
Control range 1 to 60°C
Control accuracy ± 1.5°C
Control resolution 1°C
Probes 2
Display range -44 to +60°C
Chamber temp range Ambient to 45°C
End of run criteria Timer/IR on:off
Mechanical Data
Max RPM (standard) 900/810
Max RPM (Dri-Pure) 1100/990
Max force 450 G
Drive system Direct
Operating imbalance 200/250
Max sample Ioad 6-9.6 /12-17.6 Kg
IR Iamps 12 / 24
Extra IR lamps Option 6
Vacuum System
Vacuum Pump Genevac CVP 100
Vacuum display 0-1200 mbar
Vacuum control 0-Atmosphere
Vacuum ramp Yes
System ultimate vacuum 0.5 mbar
Auto vacuum vent valve Yes
Condenser Data
Condenser temp -45°C
Vacuum condenser capacity 2 x 8 litres
Exhaust condenser capacity 2.5 litres
Condenser chamber Stainless steel
Condenser drain Manual or auto valve
Condenser level detector Option
Rapid defrost Yes
Continuous running Yes
Auto draining Option
Solvent drain pump Option
Power supply
Standard 2x230v, 50Hz, single phase
Current 21A & 16.8 A Power consumption
980 5.8 kW
Dimensions
Width 1382/1600 mm
Depth 1084/1304 mm
Height (lid closed) 1371/1371 mm
Height (lid open) 2313/2521 mm
Weight 960 / 1300 kg
Chamber dia 980/1200mm
Compressed Air Supply
Pressure Clean, dry air at 6 or 7 bar
Filtration Air filtered to 40 um
Air consumption <10 l/min (free air)
Optional Built in compressor