Genetix Q-Array mini
Objektnummer | B00020146 |
---|---|
Seriennummer | 020146 |
Object Naam | Genetix Q-Array mini |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
model: Q-Array mini
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Q-Array mini
The fully featured compact arrayer
Highest slide capacity in its class
Plate chiller and humidity control
Superior array accuracy for easy analysis
Space-saving laptop control
Simple to use protocol-based software
Fully-Featured Compact Arrayer
The Q-Array mini is a fully-featured compact microarrayer from Genetix.
This benchtop instrument has the capacity for 5 source microplates and 54 slides placed on the robot bed - the highest available capacity in the compact arrayer class. The 1 µm resolution on the X and Y linear servo drive axes and the high-precision flat bed design ensure accurate printing and reproducible spot location. A number of optional extras can be selected, including o source plate chiller, humidity control and an oil-free compressor.
Source Plates
The Q-Array mini is compatible with 96- and 384-well source microplates of different heights. Up to 5 of these microplates can be held on the robot bed. The source plates are positioned at the front of the robot bed, for easy access when changing plates. The height of the
source plate holder can be adjusted to accommodate microplates of different depths and well volumes without the need to change any software settings, making changing between plates of different heights quick and simple.
Microarray Pins
The Q-Array mini is compatible with an extensive range of Genetix solid and multiple spotting (split) aQu pins. The HPLF print head can be used in 1, 2, 4, 8, 16, 24, 32 and 48 pin mode, to give the user maximum flexibility in spotting patterns and the ability to work with 96- or 384-well microplates.
Slide Holders
Slide Position accuracy is achieved with a novel vacuum system, ensuring reproducible array locations on all slides. There are 4 individual user-controlled vacuum channels allowing the user to place a maximum of 54 slides on the system. The holders will take all standard size microscope slides (approx. 75 x 25 mm or 1 x 3 inch}, including membrane-coated slides.
Environmental Control Features
The Q-Array mini is a fully enclosed system to maintain the dust-free conditions that are critical for obtaining successful microarray data. The system can be optionally equipped with humidity control to maintain sample integrity and provide the optimum environment for printing. A high-pressure wash station with 2 source wash bottles and compressed air drying is used to clean the pins. Tests have shown that this rigorous pin washing system eliminates carryover.
Superior Array Accuracy
Superior array accuracy and exceptional array regularity is achieved on the Q-Array mini through a combination of the patented high-precision low-friction (HPLF) print head and linear servo motors. In the HPLF head the pins are held precisely in position by two layers of ball bearings, with no lateral pin movement. The small points of contact between the ball bearings and the pin allow free movement in the vertical direction with almost no friction, thereby reducing the problem of pin-sticking associated with traditional drilled heads (refer to Genetix Application Note "HPLF Head and aQu Microarray Pins"). The linear servo motors that control positioning of the HPLF head have very smooth motion and high accuracy. In comparison, the lower-cost traditional ball-screw or belt-driven systems found in non-Genetix arrayers tend to suffer from friction, backlash and jitter, all of which reduce the accuracy of the printed arrays (refer to Genetix Application Note "Linear Drive Systems").
DNA and Protein Arraying
The Q-Array mini is ideal for protein, DNA and oligo arraying. For protein and antibody arraying, it is important that the 3-D structure of the protein is retained. Proteins and antibodies are particularly temperature-sensitive and will denature if conditions are too warm, so Genetix recommends using the chilled source-plate holder (optional) for protein arraying. Conditions can be optimised further by controlling the humidity and using 300 µm solid aQu pins in the patented HPLF printing head (refer to Genetix Application Note "Protein Microarraying"}. For DNA arraying, both solid and split aQu pins can be used and humidity control is highly recommended for Optimum spot morphology and sample stability.
Instrument Specifications
Slide capacity
Up to 54 standard, 25 x 75 mm, 1 x 3 inch microscope slides
Number of spots per slide
100.000+ with aQu split pins
Spot diameter
75 - 420 µm
Spot location
Can be defined in increments of 10 µm
Centre to centre distance (spot pitch)
User-defined
Spot consistency
<4% CV in diameter for 24 Genetix 150 µm pins
Array density
User-defined
Type of print head
Patented 48-pin high-precision low-friction (HPLF) head
Types of pins
Genetix aQu solid and split pins
Number of pins
Maximum 48
Number of replicate spots per slide
Any number of replicate spots may be arrayed, user-defined
Washing
High pressure wash station with 2 source wash bottles and compressed air drying
Environmental conditions
Fully enclosed system: optional user-defined humidity control
Software
QSoft MicroArraying and QSoft Data Tracking
Dimensions of complete unit (W x D x11)
930 x 650 x 525 mm
37 x 26 x 21 inches
Weight
148 kg / 326 Ibs
Power requirements
Frequency: 45 - 66 Hz
Voltage: 100 - 120 V AC / 210 - 240 V AC
Power consumption: 200 VA Average
500 VA Maximum
Q-Array mini Arraying Speeds
Number and type of pins Speed Time to print full run of 54 slides
with 10,000 spots
---------------------------------------------------------------------------------------------------------------------------
48 split pins -44 spots / sec -3.5 hr (including wash & dry)
48 solid pins -12 spots / sec -12.5 hr (including wash & dry)