JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
manufacturer : Finnigan
model : GC Focus
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
FOCUS GC
Essential to productivity
Just the right size to boost your efficiency
New FOCUS GC: the essence of modern GC technology compacted into an affordable single channel platform. FOCUS GC is the new Thermo Finnigan product conceived to maximize productivity of QA/QC labs with fast chromatography, yelding high quality results and yet requiring minimum operator's training. Compact in size and very affordable, FOCUS GC is the ideal solution for every budget conscious laboratory looking for an instantly productive GC environment.
Compact outside
With just 0.18 square meters foot print, FOCUS GC occupies less than half the bench space of a dual channel standard GC! Smaller only on the outside, permits to have two GCs in place of a single conventional oven, with unmatched benefits for your productivity.
Large inside
A wide and spacious column oven with front door access for swift column installation. No requirement for special holders or brackets allows fast and easy installation of any commercially available capillary or wide-bore column, helping your lab to keep costs down and productivity up!
Mini keypad
The FOCUS GC keyboard is designed to permit access to those functions necessary for routine operations, yet preventing manipulation of sensitive parameters by unauthorised personnel. Just the degree of freedom required from you lab environment. In addition, the instrument can be completely programmed by a Data System, downloading different methods at any time.
But also essential to...
Reliability and performance
Rugged and compact, FOCUS GC incorporates the most recent advances in inlet and detector technology as well as in digital carrier gas control. Unprecedented instrument-to-instrument retention time repeatability and automated leck check are just a few of the key features delivered to increase performance.
System completeness
Compatibility with Fast GC and Headspace techniques makes this GC an extremely complete and powerful tool suitable for the most diverse application fields. Additional devices such as the Merlin valve extend performance beyond the standard limits.
Automation scalability
Choose the degree of automation you need. Its combination with the 8 sample AI 3000
Autoinjector or the 105 sample AS 3000 Autosampler positions the FOCUS GC in line with your laboratory's throughput requirements at any moment in time. Preserving scalability, follows your evolving needs!
On-line Control
On-line control, method set-up, acquisition and data handling, LAN interfacing and real time remote diagnostics are just a few of the possibilities of this GC in combination with Chrom -Card and ChromQuest data systems.
Reliability and Performance
Superior split/ splitless injector
Optimised for both split and splitless injection modes, the FOCUS GC inlet enables the introduction of relatively large injection volumes (five microlitres or more), thanks to its carefully designed geometry. Furthermore, fully inert vaporization chamber grants perfect sample vaporization with virtual no discrimination for heavy compounds. The injector can also be easily converted to accept packed columns.
Supreme repeatability
Unprecedented "column-to-column" and "instrument-to-instrument" retention time repeatability is promptly delivered, by effect of the proprietary automated column characterisatiori . This unique feature permits to automatically measure and store the real column parameters, making retention time repeatability independent of column sizes.
GC method transfer simplification, method standardization through different Instruments, and automatic leak check are the additional benefits. All delivered free!
Unparalleled sensitivity
The unique design of the FID detector allows the column to enter directly in the detector cell, eliminating any dead volume, and therefore peak broadening, and enhancing sensitivity. The performance goes as low as 2pgC/sec!
Fast GC
From 50 to 350°C in less than 4.5 minutes
From 350 to 50°C in less than 4.5 minutes
High pressure electronic pneumatic module.
On top of this the FOCUS GC delivers an exceptional temperature control throughout the ramp, high split flow stability, specific compatibility with narrow bore columns and fast detector response. All you would ever need for reliable Fast GC analyses!
Simple Headspace Analysis
Static headspace unattended analyses can be promptly and successfully carried out by the HS 2000 autosampler . Its heated syringe approach, eliminating any transfer line related problem, grants superior results, still leaving free access to the inlet. Quick injector maintenance or manual injections for routine calibrations are thus preserved. Even environmental or pharmaceutical analyses are perfectly performed in compliance with the most stringent regulated protocols.
Merlin Microseal TM
This septum-less device offers an effective solution to get rid of traditional rubber septa side effects (i.e. ghost peaks) in the split/ splitless injector. Easy to install and providing longer lifetime for extended automated runs this solutiori is deal complement for increased performance.
Al 3000 Autoinjector
The Al 3000 Autoinjector is the ideal solution for laboratories requiring a small degree of automation or improvement in injection precision not attainable by the human hand: up to 8 sample vials can be loaded on a removable sample holder with 4 different solvents ensuring thorough syringe rinsing. Even the most tenacious compounds are handled with ease on Al 3000.
AS 3000 Autosampler
The AS 3000 Autosampler is the high throughput answer for demanding, productive environments. 105 sample vials loaded on a removable sample tray and the system's incredible ease-of-use are the key benefits for high capacity, routine analyses. The additional upgrade option from the Al 3000, enhances flexibility and makes the initial investment a worthwhile choice.
Online control
FOCUS GC remote control and acquisition can be performed through any GC data system of the Thermo family. Dedicated, comprehensive set-up screens appear when selecting FOCUS GC, Al 3000 or AS 3000 from the Instrument configuration window.
A complete range of data handling facilities and intuitive instrument-related menus permit simple and immediate Operation of the system.
Remote control and diagnosis is allowed through the virtual keypad and the capabilities of the Ethernet adapter.
Acquisition is performed either through the digital RS232 connection port or the analogue output via a USB-connected A/D conversion module. LAN interfacing flexibility is a powerful additional benefit.
3000 SERIES
Thermo Finnigan's latest innovation in the field of sampling automation for liquids offers a complete level of automation.
Engineered to meet the highest level requirements of ruggedness and ease of use, and available in two configurations, the 3000 series is the solution for both high throughput and QA/QC control an the whole Thermo Finnigan GC&GC/MS product portfolio.
Plug & Inject, 8 position single module sampling system. The right answer for automated analyses of small batches of samples, combines the utmost precision of the automatic sampling with the ease of use of the plug & play concept.
105 position sample tray, integrated control ampling system. The perfect and irresistible attraction for high sample throughput laboratories, designed for high standard performance with low learning curve.
Executive Business Card
Performance/Simplicity =1
The new concept in sample automation making high performance a reality even without any technical expertise.
"Split-second" installation
Just a fraction of a second away from your results.
"Self-control"
The fully independent injection tower makes the AI/AS 3000 completely 1 self controlled. An extremely compact system with no requirement for additional benchspace .
Tool Free " upgradability
A real answer to your investment, follows the evolution of your laboratory workload, starting from AI and turning into AS; no tools required.
Rugged in design
The revolving turret minimises the thermal stress on the syringe and eliminates any complicated vial transfer.
Top Performing
High precision grants top class results even for the most demanding applications.
Introducing the P/S=1 concept (Performance/Simplicity)
The 3000 series establishes the new P/S =1 paradigm: the case in which simplicity does not have performance and productivity as a trade off!!
The AI/AS 3000 automatic sampling systems do not require any specific expertise from the chemist, leaving him more time for business. Simplicity is now directly proportional to top performance, making the 3000 series a masterpiece in usability.
Optimised parameter set-up
"Hot Empty Needle" or "Cold Needle" injection techniques can be programmed just by choosing the proper option in the set-up menu. Each selection incorporates optimised values for the critical parameters enabling a correct execution of the analysis: needle penetration, dwell time, and injection speed are pre-set for unprecedented repeatability results and ultimate simplicity.
Full range, high precision volume selection
The injection volume is selectable in steps of 0.1 µl over the total syringe's capacity, allowing fall control and great flexibility. Accepting 10 or 5 µl syringes, the AI/AS 3000 sampling systems are able to operate also in the microvolume range. Utmost precision is standard even when performing Fast GC.
Combined solvent rinsing
A series of 4 different solvent bottles can be used for appropriate syringe flushing.
Single or combined solvent selection for Pre and Post cleaning allow thorough rinsing even of the most tenacious compounds, thus ensuring zero cross-contamination.
In addition a 40 ml waste bottle ensures long unattended operations.
Fast and easy syringe replacement
The two types of syringes can be installed in the turret with no additional calibration.
Syringe replacement is performed as simply as removing the old and snapping in the new one. An auto centering of the turret over the sample vial, the solvent bottle and the injector is then automatically performed, without any need for any manual intervention. Just load your samples and run the analysis with no extra down time.
Rennovable trays
Both trays (8 and 105 position) can be removed for sample loading or preparation, or to be stored elsewhere, if required. In addition, multiple 8 position trays can be used as sample
holders marked accordingly to uniquely identify different batches of samples: just another useful feature for productive labs.
Safe accessibility
In compliance with all safety standards a series of switches allow the systems to be turned off automatically each time the turret is removed from the GC's mounting bracket.
Turret maneuvring is therefore freely accessible at no risk.
" Split - second" Installation
The new 3000 series is conceived and engineered for an "out-of-the-box" type installation. Fixed mechanical guides enable unequivocal slide-in installation ensuring an extremely precise alignment with the injector and making system set-up as easy as ever; just a fraction of a second to be running.
"Tool Free " upgradability
Choose your investment and make the best out of it. Following the growing business of your lab, the AI 3000 Autoinjector can easily be turned into the AS 3000 Autosampler with no tool required. Expansion from the 8 Position sample tray to a 105 sample capacity system is accomplished in a jiffy adding the rotating carousel with integrated electronics.
Both AI/AS 3000 can be installed either on the right or on the left hand side of the Trace GC just by swapping the sample container or sample tray's side; the automatic recognition of the position will do the rest.
The revolving turret allows the syringe to swing from the sample tray to the injection port. Besides avoiding any complicated sample vial transfer procedure, this approach maintains the whole system far away from any heated source. This prevents the syringe from being adversely affected by the injector's temperature and leaves the inlet unobstructed, available for manual priority sampling or maintenance.
Self control
State of the art, miniaturised electronics yields full integration of all parts required for control, with no need for external or GC on-board control module. This completely independent, compact sampling system can be placed on any Thermo Finnigan GC or GC/MS in the lab, even for rush, last minute analyses.
Results obtained in standard conditions show typical RSD% for hydrocarbons matching your best expectations, both in split and splitless !!
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie