Manufacturer: Labexchange

Model:             ECS12

The following illustrations and descriptions refer to the device model and come from brochures.

They are not the scope of delivery. For the exact scope of delivery please refer to the offer text.

Technical specifications

FLASH 14 DAD 600 detector

It is a UV-visible diode array detector that can measure the absorption of four wavelengths in the range of 200 - 600 nm simultaneously in one cell, as well as the visualization of whole spectra.

It is possible to use the detector in flash and preparative applications. By default, a PLCC 15 preparative cell is assembled, but other cells are available

ECP2100 Preparative Pump

This isocratic pump works with the ECB2007 gradient box as a quaternary gradient pump. Flow rate is 1-100 ml / min and pressure limit at 15 MPa.

The device software includes a new learning algorithm for pulsation suppression and many test and diagnostic functions

ECB2007 Gradient Box without degasser

Box is suitable for handling liquids in ECOM gradient systems. It houses a container for solvent bottles and four-way gradient valve.

The four-way gradient valve is controlled by the ECP2010, ECP2050 or ECP2100 pumps.

ECOMAC chromatography software

This system is completely controlled by the ECOMAC software, which is also part of the delivery. It allows all units to control, create gradients, and collect fractions.

Flash 14 DAD 600 detector

Wavelength range (four wavelengths at the same time) 200 - 600 nm (256 elements on CCD)

Typical spectral half width 8 nm

Adjustment accuracy ± 1 nm

Reproducibility ± 0.5 nm

Light source deuterium discharge lamp

Noise level at the test cell (254 nm, TC 0.75 s) ± 5 × 10 -5 AU

Drift in the test cell (254 nm after 1 h) 1 × 10 -3 AU / h

Materials in contact with the mobile phase PTFE; Quartz glass, stainless steel

Time constant (T90) 0.5 s; 0.75 s; 1 s or 2 s (T63 0.3 s, 0.4 s, 0.6 s, 1 s)

Output for integrator 1 V / AU (only in digital form)

Interface RS232

Power supply 90-264V

Power consumption 90 VA

Dimensions (W x H x D) 280 x 130 x 463 mm (11.02 x 5.12 x 18.23 in)

Weight 9 kg

PREPARATION CELLS PLCC 15 (EQUIPPED WITH DEVICE)

Volume / optical path (adjustable) 45 μl / 0.3 mm; 55 μl / 1.4 mm; 70 μl / 2.4 mm

Cell connection tube with OD = 1/8 ", thread 1/4" -28

Maximum flow rate 500 ml / min

ECP 2100 pump

Flow rate 0.1 - 100.0 ml / min.

Pump system two pistons dia. 3/8 "connected in parallel

Maximum operating pressure 15 MPa (2176 PSI, 150 bar)

Accuracy of flow rate (10 ml / min, 12 MPa H2O) ± 2%

Repeatability of flow rate (10 ml / min 12MPa H2O) ± 0.5%

Accuracy of pressure measurement ± 2%

Adjustable lower pressure limit 0.0 - 14.0 MPa

Adjustable upper pressure limit 1.0 - 15.0 MPa

Number of valves * 4 (A, B, C, D)

Adjustment of component concentrations * 0.0 - 100.0%

Wetted materials stainless steel, sapphire, KEL-F, gaskets **

Communication RS232, Ethernet (LAN), USB

Display, keyboard VFD 140x32 pixels, 10 buttons

Power supply 100-240V 50 / 60Hz 100VA

Dimensions (W x H x D) 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)

Weight 12 kg (26.5 lb)

Outer diameter of the output capillary 1/16

ECF 2096 fraction collector

Maximum operating pressure 1.3 bar

Maximum flow rate 200ml / min

Wetted materials PEEK, PTFE

Thread for hose connection 1/4 "-28

Connection hose OD 1/8 "

Digital outputs 2

Digital input TTL, HC, HCT

Analogue input range 0-10 V

Control RS232, LAN

Power supply 100-240 V, 50/60 Hz

Power consumption 20 VA

Dimensions (WxHxD) 220 x 170 x 450 mm

Weight 10.2 kg

ECB2007 Gradient Box

Product groep: HPLC