HPLC systemen

ECOM ECS10, quaternär präparativ

€ 12.250,00
Excl. 19% VAT , excl. Shipping Cost
€ 14.577,50 incl. Vat
Seriennummer: 31976
Status: NieuwDit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.?This is a new device. The equipment is unused and factory sealed. For new equipment the warranty of the manufacturer and the statutory warranty period shall apply.
Verzending: 3-4 weken
Beschrijving:
ECOM Kwartair voorbereidend HPLC-systeem ECS10. Met
ECP2100 Preparatieve pomp, 1-100 ml / min.
Toy14 DAD 600-detector, 200-600nm.
ECB2007 gradiëntdoos zonder ontgasser.
ECOMAC-software. Handmatige injector.
Injectieventiel met 20 µL monsterlus.
Monsterlus SS 1 ml 1/16 ".
Uitrusting.

NIEUW APPARAAT. 1 jaar fabrieksgarantie!
Installation
De installatie van dit laboratoriumapparaat voeren wij vakkundig uit. Wij bieden u graag de installatie van dit laboratoriumapparaat aan voor: 1120€, exclusief reiskosten.

Usually, laboratory and analysis devices are very exigent system with a very own specifications and requirements. Therefore, the startup of a laboratory device often rises the question how to assemble, adjust and to launch it.


We would be pleased to take over the professional installation of your laboratory devices!

Please contact us.


Benefit from the installation by us in more than one way:

  • Immediate and smooth startup of your laboratory device
  • A professional installation extends the lifetime of your laboratory device
  • Guarantee extends to 3 months
  • Freight charges do not apply*
  • You are entitled to benefit from the Labexchange Repurchase Guarantee.

* products of the product groups laboratory furniture and laminar flow are excluded. In individual cases, other product groups can be excluded.


Toevoegen aan offertelijst
Meer informatie
Objektnummer B00031976
Seriennummer 31976
Object Naam ECOM ECS10, quaternär präparativ
Status Neugerät
Fabrikant ECOM
Verzending 3-4 weken

Status, leverings- en betalingsvoorwaarden

Apparatuurcontrole

De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.

 

Verzending

De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.

In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.

 

Verzendmethoden

Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark

 

Informatie levering

De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.

Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.

 

Betalingsvoorwaarden

Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.

Land

Mogelijke betaalmethoden

Opmerking

Duitsland, Oostenrijk, Zwitserland

Betaling via factuur, vooruitbetaling

Betaling via factuur is mogelijk voor ondernemingsklanten.

Nederland, België en Luxemburg

Betaling via factuur, vooruitbetaling

Betaling via factuur is mogelijk voor ondernemingsklanten.

Andere landen

vooruitbetaling

 

 

Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.

Tussenverkoop is ons voorbehouden.

 

Beschrijving status:

Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.

Status

Conditie

Opmerking

Onmiddellijk verkrijgbaar

gebruikt Het artikel is al gecontroleerd en is in perfecte staat. Het kan onmiddellijk aan u worden verstuurd.
Op voorraad

gebruikt

We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.

Gepubliceerd

gebruikt

Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.

Nieuw

nieuw

Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.

 

 

 

manufacturer:      Labexchange

model:                  ECS10

 

 

The following illustrations and descriptions refer to the instrument model and are drawn from brochures.

They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

 

 

Technical specifications

 

FLASH 14 DAD 600 Detector

Is an UV-VIS diode array detector, which allows measuring absorbance of four wavelengths in range of 200 – 600 nm simultaneously in one cell just as visualization of whole spectra.

It is possible to use the detector in flash and preparative applications. Standardly is assembled preparative cell PLCC 15 but other cells are available

 

ECP2100 Preparative Pump 

This isocratic pump works with Gradient Box ECB2007 as a quaternary gradient pump. Flow rate range is 1-100 ml/min and pressure limit at 15 MPa.

Unit software includes new learning algorithm for pulsation suppression and many testing and diagnostic functions

ECB2007 Gradient Box without Degasser

Box is suited for handling liquids in ECOM gradient systems. It accommodates a container for solvent bottles and four-way gradient valve.

Four-way gradient valve is controlled from the pumps ECP2010, ECP2050 or ECP2100.

ECOMAC Chromatography Software

 

This system is fully controlled by ECOMAC software, which is also a part of delivery. It allows all units controlling, gradient creating and fraction collecting.

(Fraction collector can be supplied as option)

 

Flash 14 DAD 600

Wavelength range (four wavelengths simultaneously)          200 - 600 nm (256 elements on CCD)

Typical spectral half-width                                                     8 nm

Accuracy of adjustment                                                         ± 1 nm

Reproducibility                                                                       ± 0.5 nm

Light source                                                                           Deuterium discharge lamp

Noise level at test cell (254 nm, TC 0.75 s)                           ± 5 x 10-5 AU

Drift at test cell (254 nm after 1 h)                                         1 x 10-3 AU/hr

Materials in contact with mobile phase                                  PTFE; fused silica, stainless steel

Time constant (T90)                                                               0.5 s; 0.75 s; 1 s or 2 s (T63 0.3s;0.4s;0.6s;1s)

Output for integrator                                                               1 V/AU (in digital form only)

Interface                                                                                 RS232

Power supply                                                                         90-264 V

Power input                                                                            90 VA

Dimensions (W x H x D)                                                         280 x 130 x 463 mm (11.02 x 5.12 x 18.23 in)

Weight                                                                                    9 kg (19.84 lb)

PREPARATIVE CELL PLCC 15 (SUPPLIED WITH UNIT)

volume/optical path (adjustable)                                            45 μl / 0.3 mm; 55 μl / 1.4 mm; 70 μl / 2.4 mm

Cell connecting                                                                      tubing with OD = 1/8", thread 1/4"-28

Maximal flow rate                                                                  500 ml/min 

 

ECP 2100 Pump

Flow-rate                                                                               0.1 – 100.0 ml/min.

Pumping system                                                                   two plungers dia. 3/8” connected in parallel

Maximum operating pressure                                              15 MPa (2176 PSI, 150 bar)

Accuracy of flow-rate                                                           (10 ml/min. 12MPa H2O) ± 2%

Repeatability of flow-rate                                                     (10 ml/min. 12MPa H2O) ± 0.5%

Accuracy of pressure measurement                                    ± 2%

Adjustable lower pressure limit                                           0.0 – 14.0 MPa

Adjustable upper pressure limit                                          1.0 – 15.0 MPa

Number of valves*                                                               4 (A,B,C,D)

Setting of components concentrations*                               0.0 – 100.0 %

Wetted materials                                                                 stainless steel, sapphire, KEL-F, seals**

Communication                                                                    RS232, Ethernet(LAN), USB

Display, keypad                                                                   VFD 140x32 pixels, 10 pushbuttons

Power supply                                                                      100-240V 50/60Hz 100VA

Dimensions ( w x h x d )                                                      280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)

Weight                                                                                 12 kg (26,5 lb)

Output capillary outer diameter                                           1/16

 

ECB2007 Gradient Box

 

Gradient valve

 

Number of gradient valves

4 (A,B,C,D)

Maximal operating pressure

1.38 bar (20PSI)

Orifice

0.060" (1.52mm)

Wetted materials

PTFE

Common parameters

 

Connecting thread

1/4"-28 flat bottom

Power supply

100-240V 50/60Hz 20VA

Inside box dimensions (w x h x d)

267 x 56 x 305 mm

Dimensions (w x h x d)

280 x 135 x 498 mm

Weight

7 kg

Product groep: HPLC

Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
Labprocure