Dani 86.50
Objektnummer | B00011542 |
---|---|
Seriennummer | 011542 |
Object Naam | Dani 86.50 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: Dani
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
DESCRIPTION
DANI HSS 86.50 Head Space sampler is a single compact cabinet including:
· The Sampling System
· The Programmer
· The Pneumatic System
The Sampling System
The sampling system is consisting of three main devices:
· The sample vial tray
· The thermostated oven
· The Head space gas transfer device
The sample vial tray
The sample vial tray with 44 seats, is Iocated an the left side of the cabinet and it is driven by a DC motor. The standard vial volume is 20 ml, but the use of special adapters allows the sampling of 10 mI volume vials.
The thermostated oven
The thermostated oven contains a six seat rotating plate vial holder . The maximum operative temperature is 200°C, with an increment of 1°C.
The vial transfer system consists of a mobile fork carried on a bridge. This transfer system withdraws the set vial from the vial tray seat and drops it into the thermostated oven, through an inlet/outlet hole, placed at the top of the oven.
The thumbscrew allows the opening of the oven upper cover.
During the incubation time, the vials can be shaked. The left lateral panel can be removed to accede to the electronic boards.
The Head Space gas transfer device
The Head Space gas transfer device is based on the "VALVE and LOOP" System and it is housed in a thermoinsulated box. The sampling probe, the switching valve and the loop build up the manifold; it is temperature controlled and can operate at a maximum temperature of 200°C, with an increment of 1°C. The transfer of the gas Sample, from the 86.50 to the gas chromatograph, is performed by means of a heated transfer tube. The manifold and the transfer tube are heated to prevent cold spots. At the bottom left side of the unit, the program panel is placed.
On the top of the cabinet are located:
- The Carrier gas pressure reducer knob
- The Auxiliary gas pressure reducer knob
The Programmer
Fully microprocessored, it provides the complete control of the sampling System allowing up to four preprogrammed analytical methods. The analytical method includes all the parameter values (temperatures, incubation time, number of repetitive analysis an the same sample etc.) and the valve timing of all the operative steps (pressurization, sampling, venting etc.).
The PANEL is divided in three sections:
· Valve timing section
· Display section
· Control key section
The valve timing section
The valve timing section allows the Operator to set-up the valves actuation in an analytical cycle.
The display section
The display section includes sixteen alphanumeric characters.
The control section
The control section includes seven keys and live status lamps.
The Pneumatic Circuit
The HSS 86.50 sampling system, consists of a "valve and loop" device, which allows to inject into the GC a precise and known amount of the gas phase contained in the sample vial.
Gas Lines
The gas line feeding the unit is divided in two streams:
- CARRIER including a pressure regulator, the output of which is connected to the port 4 of the switching valve.
- AUX including a pressure regulator, a restrictor, the output of which is connected to the electrovalve "PRESS" and then, through a Tee connection, to the electrovalve "VENT" and to the port 2 of the switching valve.
Pressure evaluation of both gas Iines is provided by an electronic pressure transducer with readout an the display.
Technical Specification
DANI HSS 86.50 HEAD SPACE SAMPLER VIALS
Number of vials 44
Vial material neutral glass
Vial volume 20 ml
10 mI (with adapter)
Vial septa PTFE coated butyl rubber
PTFE coated silicon rubber
Vial aluminium ring
OVEN
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 0.5 % full scale
Stability ± 0.5°C
Heating electrical, with forced air
MANIFOLD
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 1.0% full scale
Stability ±0.5°C
Heating electrical
Sampling Valve MV 65/106 HT, 6-port valve
Sampling loop 1 mI volume, nickel
3 ml volume, nickel (optional)
TRANSFER TUBE
Temperature 15°C above room temperature to 220°C, 1°C increment
Accuracy 2.0% full scale
Stability ± 0.5°C
Heating electrical
OVEN CAROUSEL
Number of vials 6 seats
Shaking SOFT, oven stepping motor: 100 steps/sec.
FAST, oven stepping motor: 200 steps/sec.
PROGRAMMER
Microprocessor 8 bit
Control keys START,RESET,LOCK,SET,ACT,UP,DOWN
Operation leds WAIT,READY,AUTOSTART,RUN,LOCK
Valving timing keys and relevant leds : PROBE,PRESS,VENT,VALVE,TEST
DISPLAY
16 character alphanumeric display
PRESSURE CONTROLS
Pressure regulator with digital pressure readout
CONTROL INTERFACES
RS 232 serial communication
BCD output of sample number
CONTROL SIGNAL
Output remote start
AUTODIAGNOSTIC TEST
RAM
ROM
OVEN PROBE
VALVE PROBE
TUBE PROBE
CARRIER PRESSURE
AUXILIARY PRESSURE
UTILITIES
Power supply 220 V (± 10%), 50 Hz, 600 VA
115 V (± 10%), 60 Hz, 600 VA
Fuses 3.15 AT, 250 V (220 V)
6.30 AT, 250 V (115 V)
DIMENSIONS AND WEIGHT
Dimensions 42Wx47.4Hx61.7D cm
Weight 32 Kg