Biotek ELx50
Objektnummer | B00019319 |
---|---|
Seriennummer | 019319 |
Object Naam | Biotek ELx50 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
manufacturer : Biotek
model : ELx50
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
ELx50 Microplate Strip Washer
Overview
BioTek's years of experience in the development of both microplate washers and automated systems for EIA applications has culminated in the ELx50TM Strip Washer. As a self contained and programmable instrument, the ELx50 allows for full control of precise fluidic delivery from the gentle dripping of a simple squeeze bottle to the full force of pressure delivery systems.
The new ELx50 Washer is now a truly flexible platform that provides washing capabilities unsurpassed in its class. Newly available models with biomagnetic separation and vacuum filtration capabilities make the ELx50 an excellent choice for automating the wash steps of 96-well magnetic or polystyrene bead assays, such as those developed on the Luminex®
xMAP® technology platform. The ELx50 Washer is Luminex® xMAP® approved. Users not requiring an integrated stacker can expect the same great bead washing performance as BioTeks industry leading full plate washers but here in a more compact footprint. Comprehensive onboard software makes programming quick and easy. Custom magnets, in either flat or ring designs, incorporate high-energy neodymium iron boron magnets for rapid separation of micrometer and nanometer magnetic beads with superior retention. A fast and efficient vacuum filtration module allows vacuum to be adjusted with a range of settings for flexibility with polystyrene beads when using various filter pore sizes and sample viscosities. The vacuum filtration module is also well suited for filtration-to-waste processes such as PCR cleanup after DNA amplification to remove unwanted residues or reaction by-products with filtrate. The washers modular platform allows for processing standard solid bottom plates used in a laboratorys many traditional ELISAs and cell based assays.
The ELx50 can also be equipped with our patented Dual-Action TM 16-channel manifold. This breakthrough design allows for independent control of the dispense and aspiration manifolds for overfill washing and overflow protection in both 96- and 384-well formats. The problem of fitting dispense and aspirate tubes into a much smaller 384-well is solved with the ELx50. Additionally, in a 96-well format, the Dual-Action manifold provides incomparable wash performance with two sets of dispense and aspiration tubes per well. This exclusive method of two-fold aspiration guarantees low residuals.
As a welcome upgrade from manual processing, the new ELx50 Microplate Strip Washer will bring to your lab an all inclusive wash solution offering consistent performance and unattended operation.
High Strength Biomagnetic Separation
The ELx50's custom magnet designs incorporate high-energy neodymium iron boron magnets for rapid separation of micrometer and nanometer beads with superior retention.
Fast and Efficient Vacuum Filtration
An available vacuum filtration module automates the washing of 96-well filter bottom plates. Vacuum is adjusted via a range of settings for optimal performance with various filter pore sizes.
Automated Liquid Level Sensing
The Liquid Level Alert TM option allows users the convenience of continuous monitoring for both supply and waste bottles. At the beginning and end of a wash protocol, the liquid level is verified to ensure sufficient wash buffer remains in the designated dispense bottle to complete a microplate wash. Sufficient storage capacity in the waste bottle is also verified.
Patented Dual-ActionTM Manifold
The ELx50/16 offers incomparable wash results for 96- and 384-well microplates. In 96-well format, the unique design incorporates two sets of dispense and aspiration tubes per well.
Features
General
- Syringe drive fluid delivery system for precise control over all fluid flow rates
- Wash single strips or full plates
- 96- and 384-well microplates
- Unique priming trough built into removable microplate carrier for effortless priming and easy maintenance
- Automatic buffer switching
- Create, edit, delete and copy up to 75 programs from the keypad
- Link up to 10 programs to run the most complex routines
- Multi-user friendly; total programming control for complex research applications, yet easy to use for routine clinical work
- Programmable shaking duration and intensity
- Built-in maintenance programs
- Bottom washing and crosswise aspiration protocols
- Small footprint with integrated dispense and waste pumps
- Aerosol cover for safety
Biomagnetic Separation
- High strength biomagnetic separation for super paramagnetic bead based assays, such as Luminex xMAP®
- High energy neodymium iron boron magnets
- Optimized field gradients within wells
- Choice of flat or ring magnets - two 96-well high strength designs custom for BioTek microplate washers
- Rapid separation of micrometer and nanometer beads
- Superior microsphere retention
Vacuum Filtration
- Fast and efficient vacuum filtration for polystyrene bead assays or filtration-to-waste processes
- Range in accommodated filter pore sizes from 0.45 mm to 1.2 µmm
- Selectable vacuum levels from 91 mmHg to 313 mmHg for varying sample viscosities
- Carrier vacuum grate directs liquid droplets away from plate for minimized after-wash residual on plates underside and no cross contamination
- Software programmable dispense volume, soak and aspiration time for completely unattended operation and recall
Models
Model Part # 96-well 96-/384- Buffer Biomagnetic Vacuum
only well Switching Separation Filtration
---------------------------------------------------------------------------------------------------------------------------
ELX50/8
ELX50/8M
ELX50/8MF
ELX50/8F
ELx50 TM ELX50/8V
ELX50/12
ELX50/12V
ELX50/16
ELX50/16V
Specifications
General
Assays
Magnetic bead, polystyrene bead (model dependent)
- Multiplex assays
- Bead-based ELISA
ELISA
Cell-based assays
Protein arrays
Filtration-to-waste processes (model dependent)
Separation
Biomagnetic separation, vacuum filtration (model dependent)
Microplate Types
96- and 384-well (model dependent)
Standard height and low profile
Solid and filter bottom (model dependent)
- Filter pore sizes 0.45 µM to 1.2 µM
Shaking
Programmable in minutes and seconds up to 60 minutes
Intensities - slow, medium, fast or variable
Soak Time
Programmable in minutes and seconds up to 60 minutes
Magnet
High strength 96-well format
Choice of two designs, custom for BioTek microplate washers:
- Flat
- Flat-bottom well - beads pulled to band across well bottom
- Round-bottom well - beads pulled to button at well bottom
- Ring - beads pulled to 4-zone ring at well bottom
Incorporated into carrier, removable for non-magnetic washing
Safety/Convenience/Maintenance
Waste sensing, fluid detection (optional)
Aerosol cover
Overflow protection
Pre-programmed maintenance routines
Onboard Software
2 x 24 character LCD display
25 alphanumeric soft keys
Create, edit or run multiple protocols
Operating Temperature
15°C to 40°C (59° to 104° F)
Humidity
10% to 85%, non-condensing
Electrical
Compatible with 100 to 240 V~ ± 10% @ 50-60 Hz
Washing
Manifold Type
96-well washing: 8-tube (1x8) manifold
12-tube (1x12) manifold 96-/384-well washing :
Dual-Action TM 16-tube (1 x 16) manifold
Washing Speed
Solid bottom plates 3 asp ./ disp . cycles: >300 µL/well, 96 wells, 8-tube manifold, final
aspirate : < 130 seconds
Filter bottom plates: Variable, based on wash parameters
Fluid Delivery
Internal positive displacement syringe drive
Vacuum Filtration
Selectable vacuum levels (final at 30 seconds):
0.45 µm 96-well plates: Low: -91 mmHg
Medium: -150 mmHg
High: -313 mmHg
1.2 µm 96-well plates: Low: -95 mmHg
Medium: -155 mmHg
High: -299 mmHg
Vacuum filtration time range: 1 to 180 seconds
25 - 3,000 µL/well (model dependent)
Selectable in 1 µL increments
Buffer Selection
Automatic switching for up to 3 wash buffers (model dependent)
Flow Rates
1-9
Wash Cycles
1-10
Dispense Precision
≤3% CV
Residual Volume
Solid bottom plates ≤2 µL/well
Filter bottom plates Average increase weight of plate ≤1.2 g after dispensing 300 µL
to 0.45 µm plate, filtration 30 seconds, low vacuum, blotted
Sterilization
Chemical: 70% ethyl or isopropyl alcohol and 0.5% sodium hypochlorite solution
Supply Bottle Volume
2 L
Physical Characteristics
Dimensions
14"W x 16"D x 6.5"H (35.6 x 40.6 x 16.5 cm)
Weight
22 lbs (9.8 kg)
Regulatory
Regulatory