BioRad GS-525
Objektnummer | B00011713 |
---|---|
Seriennummer | 011713 |
Object Naam | BioRad GS-525 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Firma: BioRad
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
The Molecular Imager Systems
The GS-525 and GS-505 Molecular Imager systems form a versatile system for capturing digital images of radioactive and chemiluminescent samples using a storage phosphor technology. The systems eliminate the need for x-ray film, as well as a darkroom and developing chemicals, by capturing an image on a reusable Imaging Screen. This technology is more accurate and more sensitive than x-ray film autoradiography. Due to the wide linear dynamic range of the Molecular Imager system, radioactive and chemiluminescent samples can be accurately quantitated over a wide range of concentrations. The expanded linear response minimizes the chances of over- or under-exposure commonly encountered with film, where an incorrect exposure affects image quality and quantitation, and requires repeated exposures. In addition, the sensitivity of the Molecular Imager system permits detection of radioisotope signals 10 to 100 times faster than film. For chemiluminescence, this system requires only seconds or minutes of exposure for most applications.
The GS-525 Molecular Imager system (Figure 1.1) consists of the five components: the storage phosphor Imaging Screen Cassettes (20 x 25 cm or 35 x 43 cm), the Laser Scanner or Molecular Imager per se , the Sample Loading Dock, the Screen Eraser, and the Molecular Analyst ® software (Macintosh ® or PC) which runs on your host computer. The Imaging Screen contains microscopic storage phosphor particles which are extremely sensitive to radiation in the form of both visible light and emissions from isotopic decay. Exposing a screen to such emissions creates a latent image, which is subsequently recovered by scanning the screen with the infrared laser in the Molecular Imager system The signal is recorded as a digitized image in the host computer. The GS-505 Molecular Imager system consists of all the above, and accepts only the 20 x 25 cm screens. The Molecular Analyst software processes this image on a gray scale with 216 or 65,536 levels for quantitative analysis, and for video display and hard-copy output. The Sample Loading Dock is a light-tight apparatus for exposing the Imaging Screen to your samples. The Imaging Screens are prepared for reuse in the Screen Eraser, which floods the phosphor with infrared light. This brings the storage phosphor in the entire screen back down to its base state.
Fig. 1.1. GS-525/GS-505 Molecular Imager systems.
System Technical Specifications
Linear dynamic range 1:100,000
Pixel resolution 100, 200, or 800 µm, selectable
Image resolution 2.5 line pairs/mm or 200 µm
Pixel density 16 bit (0 - 65,635)
Signal decay 32P 75% retention 24 hr
Scanning area 35 x 43 cm or 20 x 25 cm
Operating Conditions:
Supply voltage 100240 VAC ±10%
Frequency 5060 Hz
Environmental conditions:
Temperature 0 to 70 °C
Humidity 0 to 95%
Total weight 60 kg
GS-525/GS-505 Molecular Imager Component Specifications
Laser Scanner
Dimensions 43 (depth) x 48 (width) x 17.5 (height) cm
Construction Aluminum chassis
Weight 31 kg
Electrical-
Maximum power 650 Watts
Input voltage range 100240 VAC, 5060 Hz
Fuses No user-serviceable fuses
Environmental-
Operating 50°F (10°C) to 90°F (32°C) temperature
30-80% humidity
Storage 32°F (0°C) to 140°F (60°C) temperature
10-90% humidity
Screen Eraser, GS-525
Dimensions 23 (height) x 51 (width) x 57 (depth) cm
Construction Aluminum chassis
Weight 13.6 kg
Input voltage range 100/120 VAC, 5060 Hz
220/240 VAC, 5060 Hz
Fuses 6.3 Amp (100/120 VAC)
3.15 Amp (220/240 VAC)
Illumination 12 x 40 Watt user-replaceable bulbs
Loading Dock, GS-525
Dimensions 63.5 (length) x 49.5 (width) x 11.4 (height) cm
Weight 14.5 kg
Construction Aluminum chassis
Screen Eraser, GS-505
Dimensions 19.7 (height) x 37.5 (width) x 47.6 (depth) cm
Construction Aluminum chassis
Weight 10 kg
Input voltage range 100/120 VAC, 5060 Hz
220/240 VAC, 5060 Hz
Fuses 3.15 Amp (100/120 VAC)
1.6 Amp (220/240 VAC)
Illumination 6 x 40 Watt user-replaceable bulbs
Loading Dock, GS-505
Dimensions 42.7 (length) x 42.9 (width) x 10.2 (height) cm
Weight 7 kg
Construction Aluminum chassis
Imaging Screen Cassette, Large Format
Dimensions 63.5 (length) x 37.5 (width) x 2.3 (height) cm
Weight 2.25 kg
Construction Aluminum, laminate on honeycomb
Imaging Screen Cassette, Small Format
Dimensions 48.5 (length) x 37.3 (width) x 2.1 (height) cm
Weight 2.7 kg
Construction Aluminum