JavaScript lijkt te zijn uitgeschakeld in uw browser. Voor de beste gebruikerservaring, zorg ervoor dat javascript ingeschakeld is voor uw browser.
Garantieservices
Optionele garantieverlenging tot een jaar
Optionele installatie van apparatuur voor onmiddellijk en betrouwbaar gebruik
Aantrekkelijke huur- en leasingaanbiedingen om uw budget te sparen
Vragen over dit apparaat en gratis terugbellen
Garantie:Alle gebruikte apparatuur wordt vóór levering aan een test en/of revisie onderworpen en wordt alleen dan geleverd als die perfect functioneert. De test en daaruit gebleken goede functionering worden bevestigd in een door een onafhankelijk servicebedrijf opgesteld servicecertificaat. De Labexchange Fullguarantee bedraagt 60 dagen. (Geldig voor landen binnen de EU en CH)Functioneringscertificaat:Zowel de test als het goede functioneren van het apparaat worden, behalve in het servicecerapport, gedocumenteerd in het functioneringscertificaat.24 maanden waarborg:De waarborgtermijn voor onze apparaten bedraagt 24 maanden vanaf leveringsdatum.
Indien gewenst nemen we de mogelijkheid voor verlenging van de garantietermijn van uw apparaat in overweging. Als het mogelijk is, bedraagt de garantietermijn 6 maanden voor een meerprijs van 10% over de catalogusprijs en 1 jaar bij een meerprijs van 20%. (Geldig voor DE, AT, CH, FR, NL, BE, LU, GB en IR)
Speel op zeker! Het doet ons genoegen u de installatie van uw laboratoriumapparatuur aan te kunnen bieden. Onze gekwalificeerde technici installeren het apparaat op de door u gewenste datum in het laboratorium. U kunt zo snel en veilig aan het werk met uw nieuwe laboratoriumapparatuur.
De installatie van apparatuur door Labexchange brengt ook andere voordelen met zich mee. U krijgt op die manier een garantieverlenging tot 3 maanden en heeft bovendien recht op de Labexchange Terugkoopgarantie.
Kwetsbare laboratoriumapparatuur en analysesystemen, evenals veel van de beschikbare laboratoriumkappen, zijn al inclusief installatie.
* Verplichte velden
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
Voor levering in landen buiten de EU wordt voor export een toeslag van € 70,00 in rekening gebracht. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Wij accepteren geen betalingen per creditkaart, Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land
Mogelijke betaalmethoden
Opmerking
Duitsland, Oostenrijk, Zwitserland
Betaling via factuur, vooruitbetaling
Betaling via factuur is mogelijk voor ondernemingsklanten.
Nederland, België en Luxemburg
Andere landen
vooruitbetaling
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
Status
Conditie
Onmiddellijk verkrijgbaar
gebruikt
We hebben het artikel in ons magazijn. Onze technici zullen het artikel voorafgaand aan levering controleren. U ontvangt volledig functionerende artikel.
Het artikel is nog bij de aanbieder. Na uw bestelling wordt het door ons aangekocht, gecontroleerd en aan u verstuurd. Een functioneringscertificaat en een servicerapport zijn bij de levering inbegrepen.
Nieuw
nieuw
Dit is een artikel dat nieuw van de fabriek komt. Hiervoor gelden de garantiebepalingen en wettelijke garantietermijn van de fabrikant.
manufacturer: Biometrica
model: COPAS Select
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
SYSTEMS SPECIFICATIONS COPAS SELECT
1. INTRODUCTION
The COPAS TM SELECT (Complex Object Parametric Analyzer and Sorter) is an Instrument for analyzing and sorting objects from 20-350 microns in diameter and less than 2mm in length Applications include Drosophila embryos and other like sized mode) organisms and large cellular clusters. This continuous flow system is capable of analyzing small and large quantities of objects using five parameters: size, optical density and up to three channels of fluorescence. Objects are passed axially, one by one, through a focus of a laser beam; the resulting signals are then detected and recorded by a forward scatter detector and fluorescence detectors. Relative size is measured by an axial light-loss detector, which records the time that the light blockage signal remains above a pre-set threshold level; this parameter corresponds to the time of flight (TOF). The optical density of the object is determined by the total integrated signal of the light blockage; this parameter is the object's extinction (EXT). The fluorescence intensity (FLU) can be simultaneously determined at three different wavelengths by the excitation and emission filters in the system. TOF is related to an object's axial length, EXT is related to how dark or transparent an object is, and FLU is related to the amount of fluorescing compound that is present. Sorting and dispensing decisions are based on user-selected ranges of EXT, TOF, and FLU that are entered through our COPAS software. Objects can be dispensed into microtiter plates or stationary receptacles. Using a unique, pneumatic sorting mechanism, the COPAS is gentle enough to sort and dispense live organisms without affecting their viability.
2. GENERAL PERFORMANCE SPECIFICATIONS
The objects referred to in the specifications below are specifically for Drosophila embryos, with broad application for other objects including cell clusters, beads, and other objects of similar size and shape. A selected region refers to Operator specified ranges in EXT, TOF and FLU.
Analysis and Counting Rate:
Maximum 25 objects per second with Standard COPAS software (or 100 with Advanced Acquisition Package software) based on maximum sample concentration and nominal sample flow rates.
Automated Dispensing Fill Time for 96 Well Microtiter Plates:
1.5 2 minutes per plate with 1 object per well selected, coincidence check software operating, nominal sample concentrations, and an acquisition rate of 20 objects per second in the selected region.
Automated Dispensing Accuracy:
Greater than 98% of wells filled have one or more objects. Of the filled wells, less than 5% may have 2 or more objects.
Sample Viability after Sorting and Dispensing:
There is no decrease in the viability of a live organism after having passed through our machine.
3. FLUID/ MECHANICAL SPECIFICATIONS
Sample Capacity: 250 milliliters; 40 ml Option available
Sample Concentration: Adjustable, maximum 500 objects per milliliter
Sample Flow Rate: Adjustable, nominally 6 milliliters per minute
Sample Mixing: Magnetic stirrer bars for mixing in sample cup
Sheath: Proprietary Union Biometrica sheath. The sheath contains nontoxic, non-ionic surfactant.
Sheath Capacity: 10 liters
Sheath Flow Rate: Adjustable, nominally 25 milliliters per minute
Cleaner Capacity: 1 fiter
Waste Capacity: 10 liters
Sorter Mechanism: Air jet fluid diverter
4. OPTICAL ASSEMBLY DESIGN SPECIFICATIONS
Laser: Typical laser choices include: UV 325 nm He-Cd, UV 375, 405, 488, 488/514, 561, 635, 640, 670, Ar-Kr multi-line. New lasers are being introduced all the time: please contact us if you need something different
Laser Optics: Lens assembly creates an elliptical analysis beam at the plane of the
flow cell. The 1/e2 dimensions of approximately 1 mm as measured in air with the flow cell absent.
Flow Cell: Square cross-section quartz flow cell with 500 micron square crosssection inner bore.
Detectors: PIN Photodiode for measuring extinction (EXT) and time of flight (TOF). Photomultiplier tubes for measuring fluorescence.
Ambient Light: Optical assembly is sealed and unaffected by normal room light.
5. ELECTRONICS SPECIFICATIONS
Processors: Three microprocessors controlling XY-stage motion, sorting/acquisition and fluidic control valves.
Analog: 5 acquisition channels with software settable gain, Integrator scaling, triggering threshold and 12 bit ADC. Variable voltage control for fluorescence PMT gain, walte pump speed, and mixer speeds.
Computer: IBM compatible PC with color monitor
Workspace: Permanent, open, level, vibration free space with a recommended work area of 2m Wide x 0.6m Deep. Actual instrument is 0.7m W x 0.6m D x 0.6m H (1.1 m with the lid up).
System Weight: 100 lbs (45 kg) not including Computer (approx. depending on options)
Power: Place the COPAS SYSTEM within 6 feet (2 meters) to the power outlets.
For USA and Canada: Two single phase, 120VAC, 20 amps, 50/60 HZ, on separate dedicated lines with protective earth grounds, using the detachable cords supplied. *lf the optional Air Compressor is used, it is recommended that a third dedicated line (100-120VAC, 15 Amp, 50/60 HZ, single phase on a dedicated line with protective earth ground) is provided, although it may be connected to the line with the COPAS instrument. Always ensure that local electrical codes are followed.
For Continental Europe: Two, single phase, 220/240VAC, 16 amp, 50/60 HZ, on separate dedicated lines with protective earth grounds using the detachable power cords provided or CE7/VII approved equivalent detachable cords. *lf the optional Air Compressor is used, it is recommended that a third dedicated line (220/240VAC, 10 Amp, 50/60 HZ, on separate dedicated lines with protective earth ground) is provided, although it may be connected to the line with the COPAS instrument. Always ensure that local electrical codes are followed.
Pressurized Air: 25-100 psi of filtered, at 2 CFM, non-condensing, watet and oil free supplied by house air or optional UBI supplied Compressor
Temperature: 60°F (15°C) to 85°F (30°C) environmental temperature limits. Temperature should not vary more than +/- 1 degree C from the time of experimental setup through completion. The System generates approximately 3800 BTU/Hr.
Humidity: 0 to 85% non-condensing environmental relative humidity limits.
Onze Labexchange-team zullen u graag helpen:
Christian Schmid Laboratorium en analytiek, Laboratoriuminrichting, Life science
Hubert Sauter Spectroscopie, Chromatografie