Biocode Hycel Lisa 300
Objektnummer | B00012590 |
---|---|
Seriennummer | 012590 |
Object Naam | Biocode Hycel Lisa 300 |
Status | Archiv |
Status, leverings- en betalingsvoorwaarden
Apparatuurcontrole
De gebruikte apparatuur wordt voorafgaand aan levering gecontroleerd door Labexchange Service GmbH. U ontvangt volledig functionerende apparatuur.
Verzending
De vermelde verzendtijden zijn telkens de kortste voor een artikel. In bepaalde gevallen kunnen de daadwerkelijke verzendtijden daarvan afwijken. De uiteindelijke verzendtijden worden aangegeven in de opdrachtbevestiging.
In de regel bieden we combinatieleveringen aan. Levertijden zijn afhankelijk van het artikel met de langste levertijd. Deelleveringen zijn mogelijk tegen een toeslag.
Verzendmethoden
Koeriersdiensten, transportbedrijven, zelf afhalen, levering door Labexchange wagenpark
Informatie levering
De prijzen zijn exclusief verzendkosten. De genoemde verzendkosten zijn de te verwachten kosten. Afwijkingen zijn mogelijk. In het geval geen kosten voor verzending zijn gespecificeerd, vraag die dan afzonderlijk aan.
De opgegeven vracht- en verpakkingskosten hebben betrekking op de goedkoopste transportroute en zijn onder voorbehoud van onvoorziene kostenstijgingen. Door onvoorziene gebeurtenissen kunnen vrachttarieven en levertijden op elk moment veranderen en moeten ze worden aangepast aan de huidige situatie. Incoterm coderingen volgens Incoterms 2010: Bij afhalen EXW, CFR voor zendingen over zee, CPT per luchtfracht, andere zendingen DAP. Opmerking: We geven geen preferentieel certificaat/EUR1 af. Bij zelf afhalen/af fabriek (EXW) uit derde landen en de EU wordt 16% btw als borg ingehouden, tot we de ontvangstbevestiging/het leveringscertificaat van de koper hebben ontvangen.
Betalingsvoorwaarden
Wij accepteren geen betalingen Letter of Credit, PayPal etc. Het factuurbedrag is volledig verschuldigd. Er zijn geen betalingskortingen. De goederen blijven tot volledige betaling ons eigendom.
Land |
Mogelijke betaalmethoden |
Opmerking |
Duitsland, Oostenrijk, Zwitserland |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Nederland, België en Luxemburg |
Betaling via factuur, vooruitbetaling, per creditkaart |
Betaling via factuur is mogelijk voor ondernemingsklanten. |
Andere landen |
vooruitbetaling, per creditkaart |
|
Onze Algemene Voorwaarden voor Verkoop, Levering en Betaling zijn hierop van toepassing. Deze voorwaarden zijn hier te downloaden.
Tussenverkoop is ons voorbehouden.
Beschrijving status:
Alle artikelen zijn gebruikte artikelen, tenzij bij een artikel uitdrukkelijk wordt vermeld dat het om een nieuw apparaat gaat.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
FIELD OF USE
Lisa 300 Plus is a selective multiparametric analyzer for clinical chemistry assays in vitro.
Lisa 300 Plus is well suited for analyzing a broad range of substances:
substrates,
enzymes,
electrolytes,
specific proteins,
drugs, etc.
OPERATING FEATURES
- Lisa 300 Plus is an open system, adapted to one- or two-reagent systems and can be used in the following working modes:
- On the distribution sequence:
- one reagent: - reagent and specimen sampied simultaneously,
- reagent sampled and reaction then started by adding the
specimen,
- two reagents: - simultaneous sampling of the two reagents and the specimen,
- sampling of the two reagents then reaction started by adding
the specimen,
- sampling of the first reagent and the specimen, then starting
the reaction by adding the second reagent.
- On measurement processing:
- end point, internal calibration,
- end point, factor,
- initial reaction rate,
- kinetics.
- On the caiculation of curves entered:
- linear function,
- four non-linear functions.
Electrolytes 1 are determined with a specific electrodes module built into the distributor.
A library of 96 tests in memory is used to create two working panels, each containing 36 parameters. The composition of the panels can be changed at any time. Analyses to be run an the specimens are programmed in the two panels and, for the active panel, can be processed as profile or in series.
Reagents are kept at a constant temperature inside the analyzer in a refrigerated rack.
The specimen and reagent(s) are sampied simultaneously with the sampling probe equipped with capacitive effect levei detector. The specimen and reagent(s), sampled according to the parameters of each analysis, are transferred to a microcuvette where absorbance changes are followed during the reaction. In the course of transfer, the reagent is preheated to the working temperature in the sampling probe. The outside and inside of the sampling probe are rinsed between sampling cycles to prevent contamination.
Reaction cuvettes are continuously recycled by the built-in wash module.
The specimens are continuously loaded in the analyzer in racks.
The analyzer is runs in conjunction with a microcomputer used to program all working parameters of the machine.
GENERAL DESCRIPTION
The analyzer is composed of two modules:
- the distributor, including the selective electrodes module, contains the racks for reagents and specimens which it prepares (sampling reagents, specimens, pre-dilutions, postdilutions, etc.),
- the optical module includes the reaction turntable where samples are transferred, the photometric system used to follow reactions and the reaction cuvette wash module.
The analyzer is connected to a microcomputer. When the microcomputer is booted, operating software is loaded from the microcomputer into each of the two modules.
Distributor
Fluids part
Water is permanently circulated through the fluids system (syringes, tubing, etc.).
- 1000 µl syringe Sample reagents and diluent (distilled water) by volume displacements.
Volumes sampled reagent 1: from 10 to 500 µl
reagent 2: from 0 to 450 µl
diluent : from 0 to 450 µl
- 100 µl syringe Sample specimens by volume dispiacement.
Volumes sampled from 3 to 50 µl
- Water reserve The external reservoir provides water to this reserve, which is
equipped with a level detector that interrupts sampling if the water level is low.
This alarm system prevents the fluids system from draining. The water reserve is maintained at a constant temperature.
- Rinse well The inside and outside of the sampling probe are decontaminated between successive sampling operations. Waste Iiquids are pumped into the waste container.
Sampling system
- Principle Reagents and specimens are sampled with the sampling probe. The reagent and specimen are separated inside the probe by Interface bubbies.
- Sampling unit The sampling unit is equipped with a capacitive level sensor that works with reagent and specimen samples. Reagent is preheated to analysis temperature when it is transferred to the turntable. The probe also homogenize the samples in the reaction cuvette.
Selective electrodes module
- Principle Direct potentiometric
- Parameters Sodium, potassium, chlorides
Racks
- Reagents rack 32-position removable rack for specific reagentbottles (volume: 50 mI). Refrigeration by Peltier effect.
- Specimens rack Linear 13-position specimen racks with one emergency
position.
Specimens can be placed in primary tubes (maximum size: H=75 mm, 0=13 mm) or in cups.
9 racks in line.
Positive identification of racks.
15-rack recognition capacity.
- Fixed rack One position for a 30 ml bottle (P/N LI33151972) used for:
the needle cleaning solution (Cat. No. R61029A), taken after
certain reagents in the assay cycle,
cuvette detergent solution (Cat. No. R60129A), used in standby
mode.
- Selective electrodes rack
4-position removable rack:
90 ml bottle of calibrator A (P/N 7871 N20),
10 mI bottle of calibrator B (P/N 7R71P10),
10 mI of urine diluent (P/N 7R71 D 10),
10 mI of cleaning solution (P/N 7R71B10),
Optical module
Reaction turntable
- Temperature control By pulsed air.
Temperature choice: room temp., 30°C or 37°C.
- Cuvettes 88 positions (11 bars of 8 cuvettes),
1 cm optical pathlength,
Reaction volume 250 to 550 ui.
Wash module
- Washing comb Composed of six sets of needles.
Set of three needles: used to drain the cuvette and inject system liquid, with fill level detection.
Set of two needles: used to dry the cuvette before the next use.
- Peristaltic pumps 7 draining pumps
5 injection pumps
- Fluids Cuvette wash liquid supplied from the external container The container is equipped with a level detection system. Waste is drained into common container that also has a ievel detection system.
Photometer
- Filters 340/ 405 / 500 / 540 / 580 / 620 nm.
- Light source Halogen lamp: light transmitted by optical fiber.
- Linearity from 0 to 3000 mOD (mA) units.
Printer
- Built-in printer Thermal printer (80 columns).
- External printer Possibility of connecting a Centronics type printer (via the microcomputer).
Peripheral outputs
Computer System
Minimum configuration
- Microprocessor 486 /25 MHz
- Screen VGA
- Hard disk 50 Mb
- Serial port 1
- Parallel port 1
- Diskette drive 3,5"
- RAM 640 Kb
- Memory extension not necessary
- Co-processor not necessary.
Specifications
Throughput
n 150 tests/hour for biochemistry with mono-reagents
n Up to 300 tests/hour with Na + , K + , Cl - ISE module (in option)
Methodologies
n 36 tests an line
n Subtrates, enzymes, electrolytes, specific proteins, coagulation factors, drugs.
Analysis principles
n End-point, factor or calibration
n Kinetics
n One- or two-reagent methods
n Linear or non-linear calibration
n 1 to 10 standards per parameter
n Calibrations memorized
Sampling module
n 32-positions refrigerated reagent holder
n 108 sample capacity, (180 in Option)
n Capacitive level detection (reagents and specimens)
n Reagent preheating
Samples
n Primary tubes or Cups
n Automatic pre- and post-dilution at programmable rates (diluent: isotonic saline, distilled water or specific diluent)
n Samples continuously Ioaded with positive identification of the rack. Stat samples processed in priority
Reaction medium
n 88 microcuvettes
n Temperature control by pulsed air (room temperature, 30 or 37°C)
n Reaction mixture homogenized when injected in the microcuvette.
Programming
n Permanent access to the work-list
n Immediate processing of stau
n Alphanumeric sample identification
n User definable operating parameters
Measurements
n Filter photometer
n Wavelenghts: 340-405-500-540-580-620 nm
n Light source halogen lamp + optical fiber transmission.
n Measurement in the reaction microcuvette
n Built-in wash station with liquid detection
ISE module (in Option)
n Measurement of NA + , K + , Cl - by direct potentiometry
n Sample: serum, plasma, urine with automatic predilution
n Maintenance free electrodes
n Measurement ranges Serum Urine
Na + 20-200 20-1000 mmol/I
K + 0,2-20,0 1-500 mmol/I
Cl - 25-200 20-500 mmol/I
Computer System
n Programming with portable microcomputer
n Built-in 80 column thermal printer
n Output for external printer
n RS 232 C (two-way communication with host computer)
n 3-level quality control
n LEVEY-JENNINGS representation
Power supply requirementst
n 220/110 volts, 50/60 Hz
n Maximal power consum cion 550 VA c z st
Dimensions
n L121xD72xH75cm
n Weight: 86 kg