WPS-3000(T)SL Analytical

WPS-3000(T)SL Semiprep

Sample capacity Vials

Well plates

Dependent on the carousel configuration:

216 x 0.3 mL vials, 120 x 1.1 mL conical vials, 216 x 1.2 mL vials, 120 x 1.8 mL or 2.0 mL vials, 66 x 4 mL vials, 30 x 10 mL vials and/or 120 x 0.5 mL or 1.5 mL Eppendorf tubes (open, uncapped)

+ 15 x 10 mL vials

3 x 96 or 3 x 384 normal well plate s or deep well plates 3 x 24 deep well plates, 3 x 384 low well PCR plates

+ 15 x 10 mL vials

Injection methods

Inline split-loop

Injection volume

Settable range (recommended) Optional

0.01 – 100 µL (1 – 100 µL) 0.2 – 25 µL, 1.5 – 250 µL, 1.5 – 500 µL

0.01 – 2500 µL (100 – 2000 µL) 10 – 1000 µL

Injection volume accuracy

Typically ±0.5% at 50 and 90 µL

Typically ±1% at 2000 µL

Minimum sample required

1 µL out of 5 µL

(250 µL conical vial)

N.A.

Injection volume precision

<0.25% RSD at 5 µL (typically <0.15% RSD) caffeine in water

<0.3% RSD at 100 µL (typically <0.15% RSD) caffeine in water

Linearity

Corr. coeff. >0.9999, RSD <0.5% at 5-90 µL caffeine in water

Corr. coeff. >0.9995, RSD <1% at 100-2000 µL caffeine in water

Needle wash

Active external needle wash

Carry over

<0.004% for caffeine with external wash at 7.5 MPa

<0.004% for caffeine with external wash at 7.5 MPa

Injection cycle time

<15 seconds for 5 µL

<20 s for 100 µL

WPS-3000TSL

Sample thermostatting Sample temperature accuracy

4-45 °C or 22 °C below ambient

±2 °C at a setpoint of 10 °C at ambient temperatures of ≤25 °C and ≤50% relative humidity

Weight

WPS-3000SL: 19 kg (42 lb) WPS-3000TSL: 24 kg (53 lb)

Dimensions (h x w x d)

36 ×42 ×51 cm (14.2 ×16.5 × 20 inch)

WPS-3000(T)SL Analytical

WPS-3000(T)SL Semiprep

PC connection

All functions controllable via USB 1.1; integrated USB hub with three USB 1.1 ports

I/O interfaces

4 digital inputs, 4 programmable relay outputs

Safety features

Leak sensor, sample container detection, internal monitoring of all mechanical operations WPS-3000TSL: Monitoring of the function and cooling performance by 3 temperature sensors

User input/display

LCD-indicating system parameters, Standby button

3 LEDs for status monitoring (Power, Connected, Status)

4 function keys for operation during initial installation and maintenance

GLP

In Chromeleon: Full support of automatic equipment qualification (AutoQTM) and System Wellness monitoring

All system parameters are logged in the Chromeleon Audit Trail.

Wetted parts

In sample flow path

In wash liquid flow path

PEEK, stainless steel

PEEK, stainless steel, PCTFE, Fused Silica, ETFE, ECTFE, PTFE, glass

Power requirements

100–120 V, 60 Hz; 200–240 V, 50 Hz;

max. 150 VA (WPS-3000SL), max. 320 VA (WPS-3000TSL)

Emission sound pressure level

Typically < 65 dB(A) in 1-m-distance

Environmental conditions

Range of use:                 Indoor use

Temperature:                 10 °C to 35 °C (50 °F to 95 °F)

Air humidity:                 80% relative humidity, non-condensing

Overvoltage category: II

Pollution degree:          2