Zymark SPE Modul
Objektnummer | B00013182 |
---|---|
Seriennummer | 013182 |
Nome oggetto | Zymark SPE Modul |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1) Gas Valve
Activates gas drying of the column bed if the valve is plumbed into the unit and the Dry Column step is used in software.
2) Mixing Vessel
Creates a mixed reagent when the Add Reagents to Mixing Vessel and Mix Reagents in Mixing Vessel steps are used in the software.
3) Syringe Drive and Liquid Sensor
Performs all dispense and aspirate functions. Senses if you are out of a reagent when the Liquid Sense is a yes in your procedure. You can dispense up to 6mL and load up to 5.8 mL.
4) 12-Port Valve
Directs the liquid flow from the syringe to one of the following ports as specified in your procedure:
- Reagents 1 through 8 (8 different ports)
- Vent
- Cannula
- Column plunger
- Mixing Vessel
5) Thumb Wheel Switch
Selects a module address of 0 through 9.
6) Power Light
Appears lit when the power is on.
7) Run Light
Appears lit when the module is running.
8) Error Light
Appears lit when an error occurs.
9) 3 mL or 1 mL Column Plunger
Places reagents or samples on the SPE column bed.
10) Start/Stop Switch
Starts the procedure for a magnetically encoded rack, and stops a procedure while it is running.
11) Cannula
Adds reagent to sample, mixes, and loads sample onto the column bed.
12) SPE Column Turret
Holds the 1 mL and 3 mL syringe barrel cartridges.
14) Standard Rack
- Holds up to 10 sample tubes 13 x 100 mm and 10 collection tubes 12 x 75 mm.
- Holds the magnets for magnetically encoded racks.
1) Cutout for 8 Reagent Lines and 1 Gas Line
- 8 reagent lines run from the module to the reagent bottles.
- Gas line runs from the module to the gas source.
2) Exhaust Fan
Ventilates the electronics of the module.
3) RS232 Connector (Output)
Connects this module to the input of the next module.
4) Power Switch
Turns the module AC power on or off.
5) Power Entry
Connects to the power cord AC power and houses the fuses.
6) RS232 Connector (Input)
Connects module to the controller if it is the first module, or connects module to the output of the previous module.
7) Cutout for 3 Column Waste Lines and 1 Cannula Waste Line
3 column waste lines and 1 cannula waste line run to the waste receptacles situated outside ot the module.
RapidTrace Specifications
The RapidTrace SPE Workstation modules conform to the following specifications.
Power 5060 Hz, 100240 VAC ± 10%
Weight 271bs. (12.27 kg)
Size (1 x w x h per module) 21.5" x 4" x 23" (54.61 x 10.16 x 58.42 cm)
Test Tube Sizes Sample tubes 13 mm x 100 mm
(standard rack) Fraction tubes 12 mm x 75 mm
Dispense volume 0.1 mL to 6.0 mL
Load volume 0.1 mL to 5.8 mL
Liquid Handling Accuracy Volumes < 2.5 mL +/- 0.025 mL
Volumes > 2.5 mL +/- 1%
Maximum Volume in 13x100 9 mL
Sample Tube
Maximum Volume in 12x75 5 mL
Fraction Tube
Gas Requirements Incoming Gas Supply 40 psi maximum
SPE Flow Rates 0.006 mL/sec to 0.7 mL/sec
(0.36 mL/min to 42 mL/min)
Mixing Capability Cycle mixing
Maximum mixing volume of 5.0 mL in mixer
Liquid Sensing Starts sensing above 1.2 mL
SPE Cartridges 1 mL and 3 mL syringe barrel cartridges