Archivio

Zwick Materialprüf

Seriennummer: 011078

Stato: Archived Product

Spedizione:

Descrizione:

Materiale Zwick T1 FR005TH-A50. Dimensioni: 1458x400mm. Probe. Misurazione digitale e Steuerelektonik. 3.000 millimetri / min. Max 5 kN. Supporto del campione. TestXpert versione 10.0. Anno: 2003 Prezzo originale: 34,800, - Euro.

siehe Storeview

Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

Maggiori Informazioni
Objektnummer	B00011078
Seriennummer	011078
Nome oggetto	Zwick Materialprüf
Stato	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Firma: Zwick

Modell: Materialprüf

Kommentar: Dokumente dt.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Produktbeschreibung

Zwick Material-Prüfmaschinen sind universell einsetzbar. Sie sind für nahezu alle Prüfanforderungen der nationalen und internationalen Normen, wie auch für einen großen Bereich der Prüfprobleme, die in vielen "Hausnormen" beschrieben sind, konzipiert.

Selbstverständlich sind die Material-Prüfmaschinen nicht nur in der Qualitätssicherung für Routineuntersuchungen einsetzbar, sondern auch in der Forschung, wo die Prüfvorschriften erst noch definiert werden müssen.

Technische Daten

Lastrahmen

Prüfkraft in Zug / Druck 5 kN

Lastrahmenhöhe 1 699 mm

Gesamthöhe 1 814 bis 2 714 mm

Lastrahmenbreite 680 mm

Gesamtbreite 856 mm

Lastrahmentiefe 256 mm

Gesamttiefe 650 mm

Gewicht:

mit Elektronikeinheit 160 kg

mit typischen Einbauten etwa 190 kg

Aufstellfläche:

reine Standfläche 106 cm²

Lastrahmengrundfläche 5 564 cm²

spezifische Bodenbelastung:

bezogen auf die typischen Einbauten 1,79 kg/cm²

mit 50% Sicherheit 2,69 kg/cm²

Deckenbelastung:

bezogen auf die typischen Einbauten 0,03 kg/cm²

mit 50% Sicherheit 0,05 kg/cm²

Arbeitsraumbreite 440 mm

Höhe des unteren Arbeitsraums,

ohne Einbauten 1 458 mm

Höhe des oberen Arbeitsraums,

ohne Einbauten (Querhaupt erforderlich) 1 434 mm

Lackierung RAL 7011 und RAL 7038

Umgebungstemperatur +10 bis +35°C

Luftfeuchte 20 bis 90 %

Geräuschpegel 67 dB(A)

Antrieb

Traversengeschwindigkeit 0,0005 bis 3 000 mm/min

Genauigkeit der eingestellten

Geschwindigkeit 0,03 % von V_nenn

Wegauflösung des Antriebs 0,041 µm

Positionier-Wiederholgenauigkeit < 1,0 µm

(ohne Richtungsumkehr)

Maximale Prüffrequenz 0,5 Hz

Meß- und Steuerelektronik

Meßwert-Erfassungsrate, im System 500 Hz

Meßwertübertragungsrate an PC von 10 bis 100 Hz einstellbar

Anzahl der Modul-Steckplätze 2

Nulldrift-Korrektur der gesamten Meßkette,

ohne Sensor automatisch bei Meßbeginn

Meßsignal-Laufzeitkorrektur ja

Ausgangsschnittstelle RS 232

Benötigter PC-Anschluß COM 1

Schutzart Gehäuse IP 32

Gruppo prodotti: Apparecchi per Test sui Materiali

Non è stato trovato alcun prodotto corrispondente alla selezione.